The claimed characteristics of the materials sold by us may differ only for the better
Materials for car parkings
Bitumen-polymer hermetic №42 (BP)
Usage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bitumen-polymer sealant Technonikol No. 42 is a one-component material consisting of oil bitumen, modified with rubber and technological additives. Available in three versions, depending on climatic zones: BP-G25, BP-G35, BP-G50. A sealant is used in road construction to seal expansion joints in highways, runways of aerodromes and highways.
The name of indicators Unit. measurements Value Test method BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 90 90 90 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 75 75 -||- Temperature of stickiness, not less than 0С 50 50 50 -||- Stamina, number of cycles, no less than – 30000 30000 30000 -||- Water absorption, not more than % 0,2 0,2 0,2 -||- Change in properties under UV irradiation, not more than ч 1000 1000 1000 -||- Bituminous polymer polymeric Albizol (BP)
Usage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)
The name of indicators Unit. measurements Value BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 100 100 100 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 150 200 Temperature of stickiness, not less than 0С 50 50 50 Stamina, number of cycles, no less than – 30000 30000 30000 Water absorption, not more than % 0,5 0,5 0,5 Change in properties under UV irradiation, not more than h 1000 1000 1000 Geo-grating polypropylene biaxial
Usage: Base of the roadway, Forest and access roads, Materials for the arrangement of parking places, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Road construction, Strengthening of pavement, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Geo-grating polypropylene biaxial (orange)
Usage: Base of the roadway, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of slopes, Road construction, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation
2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 SD-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or 65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Geo-grating polypropylene biaxial SD with geotextile
Usage: Автостоянки с тяжелой техникой, Дорожное строительство, Защита от камнепадов, Контейнерные терминалы, Лесные и подъездные дороги, Материалы для устройства автостоянок, Нагруженные стилобаты, Парковки легковых автомобилей, Укрепление обочин, Усиление оснований железнодорожных насыпей
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use, geotextile fulfills the function of the separation-filtering layer.
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Mastic bitumen-polymer MKTN
Usage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
The peculiarity of bitumen-polymer mastic MKTN is in the widest temperature range of its application (from -200 to +300 degrees). The usage regulations developed by the manufacturer for this mastic include: the device and repair of all types of roofs (pitched and flat, in combination with rolled waterproofing materials, glass fabrics and without them), for waterproofing of buried objects (foundations, cellars, piles, etc.)
Mastic bitumen-rubber “Stroymast”
Usage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous rubber “Stroymast” is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). It is an inexpensive equivalent of Tekhnonikol mastic # 20.
Mastic bitumen-rubber № 20
Usage: Inversion roofs, Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
Mastic Hot Bituminous Rubber MBR
Usage: Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material
Indicator name Unit. measurements Normative value MBR-65 MBR-75 MBR-90 MBR-100 Softening temperature according to the KiS method, not less than оС 65 75 90 100 Depth of penetration of the needle at 25 оС, not less than 0,1 mm 40 30 20 15 -||- Растяжимость при 25 оС, не менее cm 4 4 3 2 -||- Водонасыщение за 24 ч, не более % 0,2 0,2 0,2 0,2 Application temperature, within 0С +5 to -30
+15 to -15
+35 to -5
От +40 to -5 – Mastic hot bituminous-rubber MBR 75 ZKM
Usage: Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Hot bitumen – rubber mastic consists of petroleum bitumen, rubber crumb and plasticizer with a softening temperature of 75 grains, produced at the Kostroma waterproofing materials plant, is an inexpensive analogue of MBM mastic from Technonikol. It is intended for the device of waterproofing and anticorrosion protection of underground pipelines, and also for sealing of cracks and seams on flat roofs. Available in several modifications, differing in density and strength characteristics.
Indicator name Unit. measurements Normative value MBR-75 Softening temperature according to the KiS method, not less than оС 75 Depth of penetration of the needle at 25 оС, not less than 0,1 mm 30 Extensibility at 25 оС, not less than см 4 Water saturation for 24 hours, no more than % 0,2 Application temperature, within 0С От +15 до -15
Mastic protective polymeric aluminum №57
Usage: Mastic roofs, Parking of cars, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
Mastics waterproofing № 24 (MGTN)
Usage: Inversion roofs, Parking of cars, Waterproofing of foundations
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
Profiled geomembrane 8 mm Planter Standart 250 kN / m²
Usage: “The wall in the ground”, Concrete preparation, Garden paths, Parking of cars, Protection of waterproofing foundations, Scaffolding, The device of drainage systems, Under the foundation
- Planter Standard – profiled membrane of the popular domestic manufacturer TekhnoNIKOL, 100% consists of secondary raw materials, due to which it has a relatively low price.
- Strength of the element with a geometrical deformation of not more than 10%: 250 kN / m²
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Usage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Usage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.