Mastics and sealants

  • You've just added this product to the cart:

    Bitumen-polymer hermetic №42 (BP)

    Bitumen-polymer hermetic №42 (BP)

    Usage:


    Bitumen-polymer sealant Technonikol No. 42 is a one-component material consisting of oil bitumen, modified with rubber and technological additives. Available in three versions, depending on climatic zones: BP-G25, BP-G35, BP-G50. A sealant is used in road construction to seal expansion joints in highways, runways of aerodromes and highways.


    The name of indicators Unit. measurements Value Test method
    BP-G25 BP-G35 BP-G50
    Softening temperature, not lower than 0С 90 90 90
    Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50
    Relative elongation at the moment of rupture, not less than at -20 ° C % 75 75 75 -||-
    Temperature of stickiness, not less than 0С 50 50 50 -||-
    Stamina, number of cycles, no less than 30000 30000 30000 -||-
    Water absorption, not more than % 0,2 0,2 0,2 -||-
    Change in properties under UV irradiation, not more than ч 1000 1000 1000 -||-
    77.00 $ Retail price per kg
  • You've just added this product to the cart:

    Bituminous polymer polymeric Albizol (BP)

    Bituminous polymer polymeric Albizol (BP)

    Usage:


    Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)


    The name of indicators Unit. measurements Value
    BP-G25 BP-G35 BP-G50
    Softening temperature, not lower than 0С 100 100 100
    Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50
    Relative elongation at the moment of rupture, not less than at -20 ° C % 75 150 200
    Temperature of stickiness, not less than 0С 50 50 50
    Stamina, number of cycles, no less than 30000 30000 30000
    Water absorption, not more than % 0,5 0,5 0,5
    Change in properties under UV irradiation, not more than h 1000 1000 1000
    44.00 $ Retail price per kg
  • You've just added this product to the cart:

    Mastic bitumen-polymer MKTN

    Mastic bitumen-polymer MKTN

    Usage:


    The peculiarity of bitumen-polymer mastic MKTN is in the widest temperature range of its application (from -200 to +300 degrees). The usage regulations developed by the manufacturer for this mastic include: the device and repair of all types of roofs (pitched and flat, in combination with rolled waterproofing materials, glass fabrics and without them), for waterproofing of buried objects (foundations, cellars, piles, etc.)


     

    Approximate price per bucket
  • You've just added this product to the cart:

    Mastic bitumen-rubber "Stroymast"

    Mastic bitumen-rubber “Stroymast”

    Usage:


    Mastic bituminous rubber “Stroymast” is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). It is an inexpensive equivalent of Tekhnonikol mastic # 20.


     

    1,750.00 $ Retail price per 20l
  • You've just added this product to the cart:

    Mastic bitumen-rubber № 20

    Mastic bitumen-rubber № 20

    Usage:


    Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)


     

    1,650.00 $ Approximate price per bucket
  • You've just added this product to the cart:

    Mastic gluing №22 (Vishera)

    Mastic gluing №22 (Vishera)

    Usage:


    Mastic gluing No. 22 is a multicomponent mass consisting of petroleum bitumen, SBS-modificate, organic solvent and technical additives. The main purpose of gluing mastic No.22 TechnoNIKOL is gluing of roll, bitumen-polymer waterproofing materials without adhesive film to various surfaces.


     

    43.00 $ Wholesale price per bucket 20 kg
  • You've just added this product to the cart:

    Mastic gluing №27

    Mastic gluing №27

    Usage: 


    Mastic gluing № 27 consists of bitumen, mineral fibers, mineral fillers, organic solvent and technological additives. This mastic is used for gluing the thermal insulation (XPS, PIR plates) to bitumen waterproofing materials and concrete surfaces in the waterproofing systems of foundations.


     

    39.00 $ Розничная цена за ведро 22 кг
  • You've just added this product to the cart:

    Mastic Hot Bituminous Rubber MBR

    Mastic Hot Bituminous Rubber MBR

    Usage: 


    Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material


    Indicator name Unit. measurements Normative value
    MBR-65 MBR-75 MBR-90 MBR-100
    Softening temperature according to the KiS method, not less than оС 65 75 90 100
    Depth of penetration of the needle at 25 оС, not less than 0,1 mm 40 30 20 15 -||-
    Растяжимость при 25 оС, не менее cm 4 4 3 2 -||-
    Водонасыщение за 24 ч, не более % 0,2 0,2 0,2 0,2
    Application temperature, within 0С +5 to

    -30

    +15 to

    -15

    +35 to

    -5

    От +40 to -5
    46.00 $ Retail price per kg
  • You've just added this product to the cart:

    Mastic hot bituminous-rubber MBR 75 ZKM

    Mastic hot bituminous-rubber MBR 75 ZKM

    Usage:


    Hot bitumen – rubber mastic consists of petroleum bitumen, rubber crumb and plasticizer with a softening temperature of 75 grains, produced at the Kostroma waterproofing materials plant, is an inexpensive analogue of MBM mastic from Technonikol. It is intended for the device of waterproofing and anticorrosion protection of underground pipelines, and also for sealing of cracks and seams on flat roofs. Available in several modifications, differing in density and strength characteristics.


    Indicator name Unit. measurements Normative value
    MBR-75
    Softening temperature according to the KiS method, not less than оС 75
    Depth of penetration of the needle at 25 оС, not less than 0,1 mm 30
    Extensibility at 25 оС, not less than см 4
    Water saturation for 24 hours, no more than % 0,2
    Application temperature, within 0С От +15 до

    -15

    14.00 $ Retail price per kg
  • You've just added this product to the cart:

    Mastic protective polymeric aluminum №57

    Mastic protective polymeric aluminum №57

    Usage:


    Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.


     

    83.00 $ Wholesale price per bucket 20 kg
  • You've just added this product to the cart:

    Mastic roofing hot № 41 (Eureka)

    Mastic roofing hot № 41 (Eureka)

    Usage:


    Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material


     

    18.90 $ Approximate price per briquette 30 kg
  • You've just added this product to the cart:

    Mastic water-emulsion №33

    Mastic water-emulsion №33

    Usage:


    Waterproofing water-based mastic cold application Tekhnonikol No. 33 – modified latex and polymer modifiers, does not contain organic solvents. The peculiarity of this mastic is the absence of solvents, which makes it possible to use it in internal premises, it can be applied either mechanically (with the help of a sprayer) or manually (with a roller and brush).


     

    155.00 $ Approximate price per bucket
  • You've just added this product to the cart:

    Mastics roofing hot MBG

    Mastics roofing hot MBG

    Usage:


    Roofing mastics of hot application MBG is designed for effective repair and the construction of flat roofs, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material. It is an inexpensive equivalent of the popular Tekhnonikol mastic “Eureka”


     

    1,099.00 $ Retail price per 25 kg
  • You've just added this product to the cart:

    Mastics roofing waterproofing № 31

    Mastics roofing waterproofing № 31

    Использование: 


    Mastic roofing emulsion No. 31 consists of petroleum bitumen, modified with artificial rubber, technological additives and mineral fillers and does not contain organic solvents, which also allows for the use of mastic for internal waterproofing works. In addition, Mastic No. 31 has one of the highest adhesion values with concrete in the whole line of Tekhnonikol mastics.


     

    29.30 $ Average wholesale price per bucket 16 kg
  • You've just added this product to the cart:

    Mastics roofing waterproofing №21 (Technomast)

    Mastics roofing waterproofing №21 (Technomast)

    Usage:


    Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. An important difference between roofing mastics and waterproofing mastics is the presence of ultraviolet stabilizers.


     

    43.25 $ Approximate price per bucket 20 kg
  • You've just added this product to the cart:

    Mastics waterproofing bitumen cold MBH

    Mastics waterproofing bitumen cold MBH

    Usage:


    Mastics waterproofing MBH is a bitumen mass, modified with rubber, organic solvents, SBS modifiers, and polymers, in addition, to give greater strength bulkiness to the final mass, contains particles of asbestos (which allows the use of this mastic for smearing joints on industrial hotbeds, joints wood and glass, etc. It can be used almost in construction: in the construction of waterproofing foundations, roofs, anti-corrosion and waterproofing protection of the building structures.


     

    1,450.00 $ Retail price per bucket
  • You've just added this product to the cart:

    Mastics waterproofing № 24 (MGTN)

    Mastics waterproofing № 24 (MGTN)

    Usage:


    Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.


     

    22.35 $ Retail price per bucket
  • You've just added this product to the cart:

    Mastics waterproofing universal MBU "Econom" ZKM

    Mastics waterproofing universal MBU “Econom” ZKM

    Usage:


    Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. In the composition of this mastic there are also stabilizers, which protect against UV exposure.


     

    1,025.00 $ Retail price per bucket

Waterproofing mastics

 

Waterproofing mastics are a liquid viscous bitumen-based material that can include rubber, SBS-modifier, processing aids, mineral fillers, organic solvents, and other less popular components, depending on the type of mastic and its use.

Roofing waterproofing mastics

Mastics for the roof are divided according to the type of application - hot and cold. Hot roofing mastics more effectively cope with leaks on the roof, and also more durable waterproofing passage elements. Roof waterproofing mastics are fundamentally different from others in the presence of stabilizers from ultraviolet, preventing the destruction of the bitumen base. For example, mastic No. 24 Tehnonikol can not be used for the device of waterproofing roofs. Its service life due to the lack of a stabilizer from ultraviolet radiation will not exceed one year.

Mastics for expansion joints and cracks

When using mastics for waterproofing joints and cracks, it is customary to use mastics of hot application such as "Eureka", which in most cases are stabilized from ultraviolet, they can also be used to seal expansion joints on flat roofs. It is hot mastics that are used for waterproofing joints due to a more liquid condition in the heated form, which allows filling the maximum of voids in the seam.

Polymer mastics

Polymeric mastics are developed for use in special conditions, so MKTN mastic with additives of fire retardant, etc. can be applied and carry out waterproofing function in the widest temperature range of application - from minus 200 to + 300 degrees. Another polymeric mastic - Aluminum Technonikol No. 23 is used for the device of heat-reflecting flat roofs, as well as for waterproofing of the heat-reflecting element.

Mastics sticking

Adhesive mastics carry out at once two functions - adhesion and waterproofing, serve for installation of a thermal insulation on the foundation, and also gluing of a roll waterproofing in cases of fireproof laying, that is mastics are not used as the basic waterproofing layer, but only as reminiscent of the main roll bituminous waterproofing. The main function of such mastics is to glue the material.