The claimed characteristics of the materials sold by us may differ only for the better
Profile for universal operated expansion joint bill DSHA.-T 0 (DSHA.-T 0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DASHA.-T-0 (DSCA.-T-0) (Dilatation device Aquastop / Aquabarrier DHA.-T-0 (DASHA.-T-0 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. including asphalt).
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.Т–0 / 085 А.Т1–075 10 10 15 85 253 0,7 DSHA.Т–0–УГЛ / 085 168 Profile for universal operated expansion joint bill DSHA.TS-0 (DSHA.TS-UHL-0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHA.TS-0 (Dilatation device AQUASTOP DSHA.TS-0-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: 245 (mm) / 0,9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, loaders, etc.), 285 (mm) / 0.5 MPa – (cargo vehicles up to 20t, passenger transport, etc.), 335 (mm) / 0.3 MPa – low level of loading (passenger cars, high pedestrian load). Mounted on top of the finish coat.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.TS–0 / 245 А.ТS1–235 50 50 28 245 417 0,9 DSHA.TS–0–UGL / 245 332 DSHA.TS–0 / 285 А.ТS1–275 50 50 34 285 457 0,5 DSHA.TS–0–UGL / 285 372 DSHA.TS–0 / 335 А.ТS1–325 50 50 40 335 507 0,3 DSHA.TS–0–UGL / 335 422 Profile for universal operated expansion joint bill DSHA.TS-20 (DSHA.TS-UHL-20)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DASHA.TS-20 (Dilatation device AQUASTOP DASHA.TS-20-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 20 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–20 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-20-UGL / 230 245/302 DSHA.TS–20 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-20-UGL / 270 285/342 DSHA.TS–20 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-20-UGL / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.-T-30 (DSHA.-T-30)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.Т–30 / 085 А.Т1–075 10 10 15 85 83/195 0,7 DSHA.Т–30–UGL / 085 83/139 Profile for universal operated expansion joint mortgage DSHA.-T-50 (DSHA.-T-50)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DZHA.-T-50 (DZHA.-T-50) (Dilatation device Akvastop / Akvabarer DZHA.-T-50 (DZHA.-T-50 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. from 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Сжатие Растяжение Сдвиг А В/С DSHA.Т–50 / 055 А.Т1–075 10 10 15 85 70
83/195 0,7 DSHA.Т–50–UGL / 070 83/139 Profile for universal operated expansion joint mortgage DSHA.-T-70 (DSHA.-T-70)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DZHA.-T-70 (DSCA.-T-70) (Dilatation device Aquastop / Aqua Barrier DSCA.-T-70 (DZHA.-T-70 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo transport with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint from 55 to 70 mm, it is also possible to produce this deformation profile in the angular version. coating thickness of 70 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.Т–70 / 055 А.Т1–075 10 10 15 55 70
83/195 0,7 DSHA.Т–70–UGL / 070 83/139 Profile for universal operated expansion joint mortgage DSHA.TS 100 (DSHA.T UHL-100)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DSHA.TS-100 (Dilatation device AQUASTOP DSHA.TS-100-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 100 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS-100 А.ТС1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-100-UGL / 230 245/302 DSHA.TS-100 / 250 А.ТС1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-100-UGL / 270 285/342 DSHA.TS-100 / 300 А.ТС1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-100-UGL / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-30 (DSHA.TS-UGL-30).
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DZHA.TS-30 (Dilatation device AQUASTOP DASHA.TS-30-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–30 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-UGL-30 / 230 245/302 DSHA.TS–30 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-UGL-30 / 270 285/342 DSHA.TS–30 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-UGL-30 / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-50 (DSHA.T-UGL-50)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSCA.TS-50 (Dilatation device AQUASTOP DASHA.TS-50-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–50 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-UGL-50 / 230 245/302 DSHA.TS–50 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.T-UGL-50 / 270 285/342 DSHA.TS–50 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.T-UGL-50 / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-70 (DSHA.T-UGL-70)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHA.TS-70 (Dilatation device AQUASTOP DSHA.TS-70-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 70 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS-70 / 210 А.ТС1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-70-UGL / 230 245/302 DSHA.TS-70 / 250 А.ТС1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-70-UGL / 270 285/342 DSHA.TS-70 / 300 А.ТС1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-70-UGL / 320 335/392 The profile for a universal expansion joint is exploited by the DSHA-50 mortgage (DSHA-50 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
The deformation profile DSHA-50 (DSHA UHL-50) (dilatation device Aquastop / Akvabarer DSHA-50 (DSHA UHL-50) – the device is designed for expansion joints in areas of high pedestrian operational load (malls, shops, etc.) compensator is made of profiled aluminum durable width large enough expansion joint 25 (maximum Sustained load 0.35 MPa) to 195 mm (minimum Carrying force of 0.03 MPa), depending on the modification, also possible to produce this deformation profile in the angular Installation of profile DZHA-50 – mortgage, mounted in front of the finish coat, with a total thickness of 50 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA–50 / 025 А1–030 5 5 6 25 38
50/165 0,35 DSHA–50–UGL / 038 50/108 DSHA–50 / 055 А1–050 15 14 10 55 68
80/195 0,25 DSHA–50–UGL / 068 80/138 DSHA–50 / 085 А1–070 22 30 13 75 98
110/225 0,1 DSHA–50–UGL / 098 110/168 DSHA–50 / 110 А2–130 13 26 20 110 125
135/250 0,05 DSHA–50–UGL / 125 135/195 DSHA–50 / 150 А2–170 30 26 25 150 165
175/290 0,05 DSHA–50–UGL / 165 175/235 DSHA–50 / 180 А2–200 30 26 30 180 195
205/320 0,03 DSHA–50–UGL / 195 205/265 The profile for the expansion joint is a universal joint operated DSHA.T-UGL.2
Usage: The device of expansion joints, The device of expansion joints with extreme loads
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.T-UGL.2 А.Т1–075 10 10 15 85 85 5 The profile for the expansion joint is a universal operated bill of lading DSHA-0 (DSHA-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DZHA-0 (DZHA-0 UGL) (Dila-Akvastop / Akvabarer DSCA-0 (DZHA-0 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformation joint to be adjusted from 50 to 205 mm depending on the modification, it is also possible to produce this deformation profile in the angular version. cover.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA–0 / 050 А1–030 5 5 6 50 220 0,35 DSHA–0–UGL / 050 135 DSHA–0 / 080 А1–050 15 14 10 80 250 0,25 DSHA–0–UGL / 080 165 DSHA–0 / 110 А1–070 22 30 13 110 280 0,1 DSHA–0–UGL / 110 195 DSHA–0 / 135 А2–130 13 26 20 135 305 0,05 DSHA–0–UGL / 135 220 DSHA–0 / 175 А2–170 30 26 25 175 345 0,05 DSHA–0–UGL / 175 260 DSHA–0 / 205 А2–200 30 26 30 205 375 0,03 DSHA–0–UGL / 205 290 The profile for the universal expansion joint is exploited by the DSHA-15 mortar (DSHA-15 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Distortion profile DZHA-15 (DZHA-15 UGL) (Dilatation device AQUASTOP / AquaBarrier DZHA-15 (DZHA-15 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (maximum withheld load of 0.35 MPa) to 205 (the minimum withstand load 0.25 MPa) mm depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-15 – mortgage, mounted in front of the finish coat, with a total thickness of 15 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA–15 / 025 А1–030 5 5 6 50 220 0,35 DSHA–15–UGL / 038 135 DSHA–15 / 055 А1–050 15 14 10 80 250 0,25 DSHA–15–UGL / 068 165 DSHA–15 / 085 А1–070 22 30 13 110 280 0,1 DSHA–15–UGL / 098 195 DSHA–15 / 110 А2–130 13 26 20 135 305 0,05 DSHA–15–UGL / 125 220 DSHA–15 / 150 А2–170 30 26 25 175 345 0,05 DSHA–15–UGL / 165 260 DSHA–15 / 180 А2–200 30 26 30 205 375 0,03 DSHA–15–UGL / 195 290 The profile for the universal expansion joint is exploited by the DSHA-75 mortgage (DSHA-75 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile DZHA-75 (DZHA-75 UGL) (Dila-75 dilatation device AquaStop / Aquabarrier DZHA-75 (DZHA-75 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (the maximum withstand load is 0.35 MPa) to 195 mm (the minimum withheld load is 0.03 MPa) depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-75 – mortgage, mounted in front of the finish coat, with a total thickness of 75 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA–75 / 025 А1–030 5 5 6 25 38
50/165 0,35 DSHA–75–UGL / 038 50/108 DSHA–75 / 055 А1–050 15 14 10 55 68
80/195 0,25 DSHA–75–UGL / 068 80/138 DSHA–75 / 085 А1–070 22 30 13 75 98
110/225 0,1 DSHA–75–UGL / 098 110/168 DSHA–75 / 110 А2–130 13 26 20 110 125
135/250 0,05 DSHA–75–UGL / 125 135/195 DSHA–75 / 150 А2–170 30 26 25 150 165
175/290 0,05 DSHA–75–UGL / 165 175/235 DSHA–75 / 180 А2–200 30 26 30 180 195
205/320 0,03 DSHA–75–UGL / 195 205/265