The claimed characteristics of the materials sold by us may differ only for the better
Mastic Hot Bituminous Rubber MBR
46.00 $ Retail price per kg
- Additional information
- Questions & Answers
Hot bitumen – rubber mastic consists of petroleum bitumen, rubber crumb and plasticizer. It is intended for the device of waterproofing and anticorrosion protection of underground pipelines, and also for sealing of cracks and seams on flat roofs. Available in several modifications, differing in density and strength characteristics.
It is important to remember that in order to efficiently mastic the ICBM, it is necessary to pre-treat the substrate with a bitumen primer to ensure maximum adhesion, apply the pre-heated mastic to a temperature of 16-180 degrees with a spatula and brush, or simply pour the pre-heated mastic into the seam or embedded crack.
|Indicator name||Unit. measurements||Normative value|
|Softening temperature according to the KiS method, not less than||оС||65||75||90||100|
|Depth of penetration of the needle at 25 оС, not less than||0,1 mm||40||30||20||15||-||-|
|Растяжимость при 25 оС, не менее||cm||4||4||3||2||-||-|
|Водонасыщение за 24 ч, не более||%||0,2||0,2||0,2||0,2|
|Application temperature, within||0С||+5 to
|От +40 to -5||–|
|Strength of adhesion to concrete, MPa|| |
|Прочность сцепления с металлом, МПа|| |
|Strength of adhesion between roll materials, MPa|| |
|Прочность сцепления рулонный материал-бетон, МПа|| |
|Shear strength of adhesive joint, kN / m|| |
|Conditional strength, MPa|| |
|Relative elongation at break,%|| |
|Water absorption for 24 hours, by weight|| |
|Массовая доля нелетучих веществ, %|| |
|Heat resistance, С|| |
|Temperature of flexibility on the bar, C|| |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Usage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.