The claimed characteristics of the materials sold by us may differ only for the better
Mastic bitumen-rubber “Stroymast”
Price on request
- Description
- Additional information
- Questions & Answers
Description
Mastic bituminous rubber “Stroymast” is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). It is an inexpensive equivalent of Tekhnonikol mastic # 20.
The main purpose of bitumen-rubber mastic “Stroymast” – the device and repair of roofs. It can be used for the construction of flat roofed roofs due to the high strength characteristics achieved after complete drying of the mastic. It can also be used for waterproofing foundations, underground building structures and structures. Consumption for the device of mastic roofs 3.8-5.7 kg / m2, with a waterproofing device 2.5-3.7 kg / m2.
A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
Additional information
| Strength of adhesion to concrete, MPa | 0.1 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.1 |
| Strength of adhesion between roll materials, MPa | – |
| Прочность сцепления рулонный материал-бетон, МПа | – |
| Shear strength of adhesive joint, kN / m | – |
| Conditional strength, MPa | 0.2 |
| Relative elongation at break,% | 100 |
| Water absorption for 24 hours, by weight | 2 |
| Массовая доля нелетучих веществ, % | 73-93 |
| Heat resistance, С | +100 |
| Temperature of flexibility on the bar, C | -15 |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
- You've just added this product to the cart:
Geotextile non-woven needle-punched 300
Read MoreQuick viewGeotextile non-woven needle-punched 300
0.45 $ Price per m² (EXW / Retail)Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
- You've just added this product to the cart:
Bituminous polymer polymeric Albizol (BP)
Read MoreQuick viewBituminous polymer polymeric Albizol (BP)
Price on requestUsage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)
The name of indicators Unit. measurements Value BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 100 100 100 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 150 200 Temperature of stickiness, not less than 0С 50 50 50 Stamina, number of cycles, no less than – 30000 30000 30000 Water absorption, not more than % 0,5 0,5 0,5 Change in properties under UV irradiation, not more than h 1000 1000 1000 - You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreQuick viewWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
Price on requestUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
- You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreQuick viewWelding waterproofing material Technoelast EPP + 100 / -25 5.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
Связанные материалы
Mastic Hot Bituminous Rubber MBR
Price on requestUsage: Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material
Indicator name Unit. measurements Normative value MBR-65 MBR-75 MBR-90 MBR-100 Softening temperature according to the KiS method, not less than оС 65 75 90 100 Depth of penetration of the needle at 25 оС, not less than 0,1 mm 40 30 20 15 -||- Растяжимость при 25 оС, не менее cm 4 4 3 2 -||- Водонасыщение за 24 ч, не более % 0,2 0,2 0,2 0,2 Application temperature, within 0С +5 to -30
+15 to -15
+35 to -5
От +40 to -5 – Bentonite geomat AC
4.55 $ Price per m² (EXW / Retail)Usage: Accumulation and emergency tanks, Base of the roadway, Construction of open-cut tunnels, Drainage of retaining walls, Inversion roofs, Landfills, Oil puddles, Ponds and reservoirs, Reinforcement of slopes, Replacement of deck flooring, Reservoir, Sludge dumps, The foundation with a laying from 3 to 10 meters, Tunnel construction in a closed way, Under the foundation of 3 or more floors, Waterproofing of foundations
- Bentonite geomat AS is a material used for the construction of large areas of the waterproofing layer, including at extremely low temperatures, unlike other waterproofing, the bentonite mat “works” only at a load of 100 kg / m2 and is not subject to mechanical damage.
Index АС 50 АС 100 АСL 50 АСL 100 Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than3,0×10-11
3,0×10-111,5×10-11
1,5×10-110.0
3,0×10-110.0
1,5×10-11Degree of swelling, ml / 2g, not less than 24 24 24 24 Surface density of bentonite mat, kg / m2, ± 10 3.9 5.2 4.1 5.4 Tensile strength (along / across), kH / m, not less than 12/10 12/10 12/10 12/10 Adhesion strength, N / m, not less than 400 400 400 400 Resistance to hydrostatic pressure, atm, not less than 5 6 5 6 The thickness of the material at a load of 2 kPa, mm, ± 10% 6.0 6.4 6.2 6.6 Mastic gluing №27
Price on requestUsage: Waterproofing of foundations
Mastic gluing № 27 consists of bitumen, mineral fibers, mineral fillers, organic solvent and technological additives. This mastic is used for gluing the thermal insulation (XPS, PIR plates) to bitumen waterproofing materials and concrete surfaces in the waterproofing systems of foundations.
- You've just added this product to the cart:
Welded waterproofing material BilastMost +110 6.0 EPP
Read MoreQuick viewWelded waterproofing material BilastMost +110 6.0 EPP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
BilastMost EPP is an inexpensive substitute for popular materials TechnoelastMost B, Mostoizol 110, designed specifically for the construction of a waterproofing layer for multi-level open parking, bridges, etc. But also the material due to high weighting (6.0 kg / m2) can be used for the construction of a waterproofing layer of the foundation in one layer (instead of the classic two EPG + EPP, recommended by most design organizations).
- You've just added this product to the cart:
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Read MoreQuick viewWeldable waterproofing material Technoelast Alpha EPP -20 / + 100
Price on requestUsage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
