The claimed characteristics of the materials sold by us may differ only for the better
Geosynthetic materials for the device of garden paths
Geotextile non-woven needle-punched 100
Usage: Agriculture, Garden paths
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 150
Usage: Agriculture, Artificial lawn on sports grounds, Drainage layer, Garden paths, Natural lawn on sports grounds, Scaffolding
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 200
Usage: Airport, Concrete preparation, Deep drainage, Protection of waterproofing foundations, Railways, Stylobates loaded, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 250
Usage: Armorranean mounds, Artificial lawn on sports grounds, Drainage layer, Garden paths, Inversion roofs, Landscaping, Materials for the arrangement of parking places, Natural lawn on sports grounds, Reinforcement of slopes, Scaffolding, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Profiled geomembrane 8 mm Planter Standart 250 kN / m²
Usage: “The wall in the ground”, Concrete preparation, Garden paths, Parking of cars, Protection of waterproofing foundations, Scaffolding, The device of drainage systems, Under the foundation
- Planter Standard – profiled membrane of the popular domestic manufacturer TekhnoNIKOL, 100% consists of secondary raw materials, due to which it has a relatively low price.
- Strength of the element with a geometrical deformation of not more than 10%: 250 kN / m²
Thermo-embedded geotextile Ekospan Geo 110 (PP)
Usage: Artificial gardening, Artificial lawn on sports grounds, Construction of motorways, Drainage layer, Garden paths, Landscaping, Natural lawn on sports grounds, Scaffolding, Shores of rivers and canals, The device of drainage systems, Underground parking lots
- Thermo-embedded geo-textiles Ecospan Geo 110, when compared with the popular analogue for technical characteristics, is between Typar SF32 and Typar SF37, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ecospan Geo – geotextile produced by the famous Hex company for the products of “Izospan”. Unlike Ecospan Geo 90, the main purpose of this material is drainage (not filtration) under load.
Indicators Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90 Structure nonwoven fabric nonwoven fabric Colour White/gray White/gray Presence of additives – – Surface density, g / m2 90 110 Deviation from the nominal surface density,% ±10% ±10% Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м Elongation at rupture, in length / width,%, not more than – – Water permeability, l / m2 26 25 Resistance to UV irradiation,%, not less than – – Width, m 1;2 1;2 Length in roll, m 5;10;25 5;10;25 Thermo-embedded geotextile Ekospan Geo 90 (PP)
Usage: Artificial gardening, Artificial lawn on sports grounds, Drainage layer, Garden paths, Landscaping, Natural lawn on sports grounds, Scaffolding, The device of drainage systems
- Thermo-embedded geo-textiles Ecospan Geo 90, when compared with the popular analogue for technical characteristics, is between Typar SF27 and Typar SF32, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ekospan Geo is a product of the famous Hex company for the production of Isospan.
Indicators Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90 Structure nonwoven fabric nonwoven fabric Colour White/gray White/gray Presence of additives – – Surface density, g / m2 90 110 Deviation from the nominal surface density,% ±10% ±10% Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м Elongation at rupture, in length / width,%, not more than – – Water permeability, l / m2 26 25 Resistance to UV irradiation,%, not less than – – Width, m 1;2 1;2 Length in roll, m 5;10;25 5;10;25