The claimed characteristics of the materials sold by us may differ only for the better
Bituminous polymer polymeric Albizol (BP)
Price on request
- Description
- Questions & Answers
Description
Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)
The variants of sealant production differ in the temperature of flexibility on the bar, in which there are no cracks in the sealant (that is, the degree of modification), BP-G25 is suitable for warm climatic zones where the winter temperature is not lower than -20 degrees, BP-G35 is suitable for central Russia , where the minimum winter temperature is at least -30 degrees. BP-G50 was developed specifically for the northern regions of the country, this modification of the sealant withstands negative temperatures down to -50 degrees.
| The name of indicators | Unit. measurements | Value | |||
| BP-G25 | BP-G35 | BP-G50 | |||
| Softening temperature, not lower than | 0С | 100 | 100 | 100 | |
| Flexibility on the rod Æ 20 mm, not higher | 0С | -25 | -35 | -50 | |
| Relative elongation at the moment of rupture, not less than at -20 ° C | % | 75 | 150 | 200 | |
| Temperature of stickiness, not less than | 0С | 50 | 50 | 50 | |
| Stamina, number of cycles, no less than | – | 30000 | 30000 | 30000 | |
| Water absorption, not more than | % | 0,5 | 0,5 | 0,5 | |
| Change in properties under UV irradiation, not more than | h | 1000 | 1000 | 1000 | |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
-
You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreQuick viewWelding waterproofing material Technoelast EPP + 100 / -25 5.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreQuick viewWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
Price on requestUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
-
You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreQuick viewSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Price on requestUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Read MoreQuick viewWeldable waterproofing material Technoelast HPP + 100 / -25 4.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
-
You've just added this product to the cart:
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Read MoreQuick viewSurfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Связанные материалы
-
Fiberglass geogrid with geotextile
Price on requestUsage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm along across SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % from 50 to 150 -
You've just added this product to the cart:
Geo-polyester in the ground (impregnation of PVC)
Read MoreQuick viewGeo-polyester in the ground (impregnation of PVC)
1.10 $ – 2.77 $ Price per m² (EXW / Retail)Usage: Airport, Base of the roadway, Container terminals, Landfills, Parking lots with heavy equipment, Railways
- Polyester geogrid with impregnation on the basis of PVC is used to strengthen roadbeds in the base with insufficient bearing capacity in order to prevent the formation of stakes, cracks, etc.
50 / 50 100 / 100 150 / 150 200 / 200 Сырьё Полиэфир [PET] Пропитка ПВХ Прочность при растяжении (вдоль/поперёк), не менее, кН/м 50 / 50 100 / 100 150 / 150 200 / 200 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 250 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 -
You've just added this product to the cart:
Profiled geomembrane 8 mm Planter Standart 250 kN / m²
Read MoreQuick viewProfiled geomembrane 8 mm Planter Standart 250 kN / m²
1.25 $ Price per m² (EXW / Retail)Usage: “The wall in the ground”, Concrete preparation, Garden paths, Parking of cars, Protection of waterproofing foundations, Scaffolding, The device of drainage systems, Under the foundation
- Planter Standard – profiled membrane of the popular domestic manufacturer TekhnoNIKOL, 100% consists of secondary raw materials, due to which it has a relatively low price.
- Strength of the element with a geometrical deformation of not more than 10%: 250 kN / m²
-
Mastic bitumen-rubber “Stroymast”
Price on requestUsage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous rubber “Stroymast” is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). It is an inexpensive equivalent of Tekhnonikol mastic # 20.
-
You've just added this product to the cart:
Woven geotextile high strength 800-100 / 800-50
Read MoreQuick viewWoven geotextile high strength 800-100 / 800-50
8.90 $ Price per m² (EXW / Retail)Usage: Армирование склонов, Аэропорт, Глубинный дренаж, Горизонтальный пластовой дренаж, Грунтовые подпорные стены, Дренаж подпорных стен, Дренажный слой, Железные дороги, Ландшафтный дизайн, Нагруженные стилобаты, Основание дорожного полотна, Укрепление дорожного покрытия, Укрепление откосов, Усиление оснований железнодорожных насыпей, Устройство дренажных систем
- Woven geotextile 800-100 is the most durable woven material on the domestic market (among the warehouse items), guaranteeing the tensile strength at a longitudinal 6% elongation of at least 400 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420
