Thermally bonded

  • You've just added this product to the cart:

    Thermo-embedded geotextile Ekospan Geo 110 (PP)

    Placeholder

    Thermo-embedded geotextile Ekospan Geo 110 (PP)

    Usage: 


    • Thermo-embedded geo-textiles Ecospan Geo 110, when compared with the popular analogue for technical characteristics, is between Typar SF32 and Typar SF37, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ecospan Geo – geotextile produced by the famous Hex company for the products of “Izospan”. Unlike Ecospan Geo 90, the main purpose of this material is drainage (not filtration) under load.

    Indicators
    Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90
    Structure nonwoven fabric nonwoven fabric
    Colour White/gray White/gray
    Presence of additives
    Surface density, g / m2 90 110
    Deviation from the nominal surface density,% ±10% ±10%
    Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м
    Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м
    Elongation at rupture, in length / width,%, not more than
    Water permeability, l / m2 26 25
    Resistance to UV irradiation,%, not less than
    Width, m 1;2 1;2
    Length in roll, m 5;10;25 5;10;25
    0.95 $ Approximate middle wholesale price per square meter
  • You've just added this product to the cart:

    Thermo-embedded geotextile Ekospan Geo 90 (PP)

    Placeholder

    Thermo-embedded geotextile Ekospan Geo 90 (PP)

    Usage: 


    • Thermo-embedded geo-textiles Ecospan Geo 90, when compared with the popular analogue for technical characteristics, is between Typar SF27 and Typar SF32, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ekospan Geo is a product of the famous Hex company for the production of Isospan.

    Indicators
    Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90
    Structure nonwoven fabric nonwoven fabric
    Colour White/gray White/gray
    Presence of additives
    Surface density, g / m2 90 110
    Deviation from the nominal surface density,% ±10% ±10%
    Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м
    Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м
    Elongation at rupture, in length / width,%, not more than
    Water permeability, l / m2 26 25
    Resistance to UV irradiation,%, not less than
    Width, m 1;2 1;2
    Length in roll, m 5;10;25 5;10;25
    0.85 $ Approximate middle wholesale price per square meter

Thermally bonded geotextile

 

Thermally-bonded (thermoclaimed) geotextiles - a web of thermally bonded yarns. In Russia, thermo-bonded non-woven geotextile is found only from primary polypropylene. The canvas has good water permeability and low degree of siltation, in contrast to the classical nonwoven needle-punched geotextile, but with lower strength characteristics and a higher price. Classic thermo-bonded geotextile in Russia is found only in two manufacturers - Ecospan, Typar.

 

What is used for?

Thermally-bonded geotextiles are recommended for use in building structures and structures, where high quality filtration rates are required and the degree of silting is low, as well as high durability of the material (manufacturer of thermo-bonded geo-textiles Typar (DuPont) gives an official guarantee of 100 years for all of its thermo-creped materials). Ekospan is produced using the same technology from the same raw material.

Какой бывает

Thermally bonded geotextiles are found in modifications from 10 kN / m to 200 kN / m2 (Typar SF20 / Typar SF111), the least durable modifications of thermo-bonded geotextiles are ideal for the device of garden paths, unlike non-woven needle-punched low-strength geotextiles, Typar SF20 completely prevents germination of plants , and also preserves the filter function throughout its life. Durable modifications of non-woven thermo-bonded geotextiles (starting from Typar Sf56) are used on a par with strong needle-punched analogs (but where long service life and filtration without siltation are required) with the device of autobahns, roads to prevent reflected cracks, and tight modifications like Typar Sf77 + are recommended by manufacturers for Devices for protecting waterproofing from damage when backfilling on foundations and inversion roofs.

What happens

When choosing a thermo-bonded geotextile, it is important to note that domestic brands of heat-sealed geotextiles such as "Geotex S", "Technonikol" ETC. - are, in fact, needle-punched heat-sealed geotextiles (that is, a conventional non-woven needle-punched geotextile is rolled and rolled in thermal caldrons), so these grades have even worse water conductivity than conventional non-woven geotextiles. It is produced for roofing works on flat roofs, as thermally calendered non-woven needle-punched geotextile is not screwed onto self-tapping screws when fastening heat insulation, using heat-sealed geotextiles on flat roofs.

Purchase characteristics (Manufacturers of geotextile)

Manufacturers of geotextiles
In Russia, thermo-bonded geotextiles are found in the following brands:

  • Classic thermally bonded geotextile: Terram, Typar, Ekospan
  • Non-woven needle-punched geotextile (roofing): Tehnonikol, Geotex S (Tehpolimer)