The claimed characteristics of the materials sold by us may differ only for the better
Materials for reinforcing the asphalt-concrete seam
Bitumen-polymer hermetic №42 (BP)
Usage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bitumen-polymer sealant Technonikol No. 42 is a one-component material consisting of oil bitumen, modified with rubber and technological additives. Available in three versions, depending on climatic zones: BP-G25, BP-G35, BP-G50. A sealant is used in road construction to seal expansion joints in highways, runways of aerodromes and highways.
The name of indicators Unit. measurements Value Test method BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 90 90 90 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 75 75 -||- Temperature of stickiness, not less than 0С 50 50 50 -||- Stamina, number of cycles, no less than – 30000 30000 30000 -||- Water absorption, not more than % 0,2 0,2 0,2 -||- Change in properties under UV irradiation, not more than ч 1000 1000 1000 -||- Bituminous polymer polymeric Albizol (BP)
Usage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)
The name of indicators Unit. measurements Value BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 100 100 100 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 150 200 Temperature of stickiness, not less than 0С 50 50 50 Stamina, number of cycles, no less than – 30000 30000 30000 Water absorption, not more than % 0,5 0,5 0,5 Change in properties under UV irradiation, not more than h 1000 1000 1000 Fiberglass geogrid with geotextile
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm along across SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % from 50 to 150 Geo-grating polyester in asphalt (impregnation with bitumen)
Usage: Airport, Forest and access roads, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Polyester geogrid with bituminous impregnation (impregnation is used to improve adhesion with asphalt), is used for reinforcing asphalt-concrete layers in road construction, in order to prevent the formation of cracks and sprawl of the roadway.
30 / 30 50 / 50 80 / 80 100 / 100 Сырьё Полиэфир [PET] Пропитка Дисперсия на основе битума Прочность при растяжении (вдоль/поперёк), не менее, кН/м 30 / 30 50 / 50 80 / 80 100 / 100 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 190 ± 10 250 ± 10 370 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 Geo-grating uniaxial polyester
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SPSS – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geo-polyester with a substrate
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geogrid C1
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SPSS – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geogrids fiberglass
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geogrids from glass fiber
Usage: Airport, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Reinforcing the roadbed, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid – can be used for reinforcing asphalt concrete instead of classical polyester geogrid with bituminous impregnation, if the predicted lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Mastic bitumen-polymer MKTN
Usage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
The peculiarity of bitumen-polymer mastic MKTN is in the widest temperature range of its application (from -200 to +300 degrees). The usage regulations developed by the manufacturer for this mastic include: the device and repair of all types of roofs (pitched and flat, in combination with rolled waterproofing materials, glass fabrics and without them), for waterproofing of buried objects (foundations, cellars, piles, etc.)
Mastic bitumen-rubber “Stroymast”
Usage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous rubber “Stroymast” is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). It is an inexpensive equivalent of Tekhnonikol mastic # 20.
Mastic bitumen-rubber № 20
Usage: Inversion roofs, Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
Mastic Hot Bituminous Rubber MBR
Usage: Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material
Indicator name Unit. measurements Normative value MBR-65 MBR-75 MBR-90 MBR-100 Softening temperature according to the KiS method, not less than оС 65 75 90 100 Depth of penetration of the needle at 25 оС, not less than 0,1 mm 40 30 20 15 -||- Растяжимость при 25 оС, не менее cm 4 4 3 2 -||- Водонасыщение за 24 ч, не более % 0,2 0,2 0,2 0,2 Application temperature, within 0С +5 to -30
+15 to -15
+35 to -5
От +40 to -5 – Mastic hot bituminous-rubber MBR 75 ZKM
Usage: Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Hot bitumen – rubber mastic consists of petroleum bitumen, rubber crumb and plasticizer with a softening temperature of 75 grains, produced at the Kostroma waterproofing materials plant, is an inexpensive analogue of MBM mastic from Technonikol. It is intended for the device of waterproofing and anticorrosion protection of underground pipelines, and also for sealing of cracks and seams on flat roofs. Available in several modifications, differing in density and strength characteristics.
Indicator name Unit. measurements Normative value MBR-75 Softening temperature according to the KiS method, not less than оС 75 Depth of penetration of the needle at 25 оС, not less than 0,1 mm 30 Extensibility at 25 оС, not less than см 4 Water saturation for 24 hours, no more than % 0,2 Application temperature, within 0С От +15 до -15