The claimed characteristics of the materials sold by us may differ only for the better
- Additional information
- Questions & Answers
Gabions of cylindrical form are used, as a rule, to strengthen the bottom of ponds, ponds, rivers, the construction of berths (etc.) as a strong base for the installation of box-type gabions, the reason is that gabions of cylindrical shape easily take the form of the bottom differences from box and mattress-mattress, where the installation area is flat).
Modifications of cylindrical gabions can differ not only in size, but also in the diameter of the grid (determines the expected loads) from which the gabion is executed, the size of the cell (the cell size corresponds to the fractionality of the material filled with gabion). The presence of PVC – spraying (determines the resistance to acidic media), the number of diaphragms of gabions (determines the size of the box gabion). On this, the differences between box-type gabions end.
The diameter of the grid can be provided in three versions: 2.4, 2.7, 3.0, 3.4, 3.7 mm (GOST R52132-03). All gabions offered by our company are made strictly from galvanized mesh (without galvanizing we do not even make an order, because such a design is extremely unreliable). The sizes of gabions of cylindrical shape are not standardized and are made, as a rule, for a specific project, the standard size of cylindrical gabons is 3×0.65, where 3 m is the length, 0.65 m is the diameter
Anti-erosion, Buildings in seismically active zones, Buildings on unstable soils, Landscaping, Marine dams, Reinforcement of slopes, Reservoir, Sea coast to the bay, Shores of rivers and canals, Устройство водоемов, Фундаменты заборов
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
Geotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geomembrane HDPE / LLDPE with geotextile (one-side thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (one-side thermal bonding) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.