The claimed characteristics of the materials sold by us may differ only for the better
Materials for the arrangement of parking places
Our range includes all geosynthetic materials used for reinforcing the base as well as the asphalt-concrete layer in the construction of car parking lots: geogrids for reinforcing the asphalt-concrete coating with bituminous coatings based on polyester, as well as fiberglass, geared biaxially oriented universal use (SD) filtering layer and without, as well as many modifications of different geotextiles, selected depending on conditions, build flattery.
Geo-grating polyester in asphalt (impregnation with bitumen)
Usage: Airport, Forest and access roads, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Polyester geogrid with bituminous impregnation (impregnation is used to improve adhesion with asphalt), is used for reinforcing asphalt-concrete layers in road construction, in order to prevent the formation of cracks and sprawl of the roadway.
30 / 30 50 / 50 80 / 80 100 / 100 Сырьё Полиэфир [PET] Пропитка Дисперсия на основе битума Прочность при растяжении (вдоль/поперёк), не менее, кН/м 30 / 30 50 / 50 80 / 80 100 / 100 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 190 ± 10 250 ± 10 370 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 Geo-grating polypropylene biaxial
Usage: Base of the roadway, Forest and access roads, Materials for the arrangement of parking places, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Road construction, Strengthening of pavement, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Geo-grating polypropylene biaxial SD with geotextile
Usage: Автостоянки с тяжелой техникой, Дорожное строительство, Защита от камнепадов, Контейнерные терминалы, Лесные и подъездные дороги, Материалы для устройства автостоянок, Нагруженные стилобаты, Парковки легковых автомобилей, Укрепление обочин, Усиление оснований железнодорожных насыпей
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use, geotextile fulfills the function of the separation-filtering layer.
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Geogrids from glass fiber
Usage: Airport, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Reinforcing the roadbed, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid – can be used for reinforcing asphalt concrete instead of classical polyester geogrid with bituminous impregnation, if the predicted lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geotextile non-woven needle-punched 250
Usage: Armorranean mounds, Artificial lawn on sports grounds, Drainage layer, Garden paths, Inversion roofs, Landscaping, Materials for the arrangement of parking places, Natural lawn on sports grounds, Reinforcement of slopes, Scaffolding, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Usage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Usage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
Woven Geotextile 100-100 (PP)
Usage: Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 100 – has average strength characteristics in the range of woven polypropylene geotextiles, can be used for reinforcement, separation of layers, drainage and protection on any objects without pronounced requirements for increased strength.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 Woven Geotextile 100-100 / 100-50 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 100 is a woven fabric of medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 60 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven Geotextile 150-150 (PP)
Usage: Airport, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Parking lots with heavy equipment, Railways, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, Strengthening the foundations of railway embankments, Stylobates loaded, The device of drainage systems
- Woven geotextile 150 is the most durable woven geotextile in the woven polypropylene fabric line, high uniform (longitudinal and transverse) strength of the geotextile makes it possible to use it at objects with increased reliability requirements (NPPs, CHPPs, Airports, railways, etc.)
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 Woven Geotextile 40-40 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Forest and access roads, Ground retaining walls, Horizontal reservoir drainage, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 40 is a woven fabric with the lowest strength characteristics in the woven geotextile line. It is used mainly as a filtering or separating layer, rarely for reinforcement.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven geotextile 80-80 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 80 – woven fabric, medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 50 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven Geotextile 80-80 (PP)
Usage: Drainage layer, Drainage of retaining walls, Forest and access roads, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Reinforcing the roadbed, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 80 – has average strength characteristics in the range of woven polypropylene geotextiles, can be used for reinforcement, separation of layers, drainage and protection on any objects without pronounced requirements for increased strength.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 Геотекстиль нетканый иглопробивной 350
Usage: Agriculture, Armorranean mounds, Base of the roadway, Drainage of retaining walls, Hydrotechnical works, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Seed shelter, Shelter of roses, Under the foundation
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost