The claimed characteristics of the materials sold by us may differ only for the better
Mastic hot bituminous-rubber MBR 75 ZKM
Price on request
- Description
- Additional information
- Questions & Answers
Description
Hot bitumen – rubber mastic consists of petroleum bitumen, rubber crumb and plasticizer with a softening temperature of 75 grains, produced at the Kostroma waterproofing materials plant, is an inexpensive analogue of MBM mastics from Technonikol. It is intended for the device of waterproofing and anticorrosion protection of underground pipelines, and also for sealing of cracks and seams on flat roofs. Available in several modifications, differing in density and strength characteristics.
It is important to remember that in order to efficiently mastic the ICBM, it is necessary to pre-treat the substrate with a bitumen primer to ensure maximum adhesion, apply the pre-heated mastic to a temperature of 16-180 degrees with a spatula and brush, or simply pour the pre-heated mastic into the seam or embedded crack.
| Indicator name | Unit. measurements | Normative value | ||||
| MBR-75 | ||||||
| Softening temperature according to the KiS method, not less than | оС | 75 | ||||
| Depth of penetration of the needle at 25 оС, not less than | 0,1 mm | 30 | ||||
| Extensibility at 25 оС, not less than | см | 4 | ||||
| Water saturation for 24 hours, no more than | % | 0,2 | ||||
| Application temperature, within | 0С | От +15 до
-15 |
||||
Additional information
| Strength of adhesion to concrete, MPa | 0.2 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.25 |
| Strength of adhesion between roll materials, MPa | 0.15 |
| Прочность сцепления рулонный материал-бетон, МПа | 0.15 |
| Shear strength of adhesive joint, kN / m | 4 |
| Conditional strength, MPa | 0.2 |
| Relative elongation at break,% | 1100 |
| Water absorption for 24 hours, by weight | 1 |
| Массовая доля нелетучих веществ, % | – |
| Heat resistance, С | +130 |
| Temperature of flexibility on the bar, C | – |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreQuick viewWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
Price on requestUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
- You've just added this product to the cart:
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Read MoreQuick viewSurfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
- You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreQuick viewSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Price on requestUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
- You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreQuick viewWelding waterproofing material Technoelast EPP + 100 / -25 5.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
- You've just added this product to the cart:
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Read MoreQuick viewWeldable waterproofing material Technoelast HPP + 100 / -25 4.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
Связанные материалы
Mastic gluing №27
Price on requestUsage: Waterproofing of foundations
Mastic gluing № 27 consists of bitumen, mineral fibers, mineral fillers, organic solvent and technological additives. This mastic is used for gluing the thermal insulation (XPS, PIR plates) to bitumen waterproofing materials and concrete surfaces in the waterproofing systems of foundations.
- You've just added this product to the cart:
Mastic protective polymeric aluminum №57
Read MoreQuick viewMastic protective polymeric aluminum №57
Price on requestUsage: Mastic roofs, Parking of cars, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
- You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreQuick viewSurfacing waterproofing material Technoelast Thermo EPP
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
Mastic bitumen-rubber № 20
Price on requestUsage: Inversion roofs, Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
Mastics waterproofing № 24 (MGTN)
Price on requestUsage: Inversion roofs, Parking of cars, Waterproofing of foundations
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
