The claimed characteristics of the materials sold by us may differ only for the better
Bitumen-polymer hermetic №42 (BP)
Usage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bitumen-polymer sealant Technonikol No. 42 is a one-component material consisting of oil bitumen, modified with rubber and technological additives. Available in three versions, depending on climatic zones: BP-G25, BP-G35, BP-G50. A sealant is used in road construction to seal expansion joints in highways, runways of aerodromes and highways.
The name of indicators Unit. measurements Value Test method BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 90 90 90 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 75 75 -||- Temperature of stickiness, not less than 0С 50 50 50 -||- Stamina, number of cycles, no less than – 30000 30000 30000 -||- Water absorption, not more than % 0,2 0,2 0,2 -||- Change in properties under UV irradiation, not more than ч 1000 1000 1000 -||- Bituminous polymer polymeric Albizol (BP)
Usage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)
The name of indicators Unit. measurements Value BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 100 100 100 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 150 200 Temperature of stickiness, not less than 0С 50 50 50 Stamina, number of cycles, no less than – 30000 30000 30000 Water absorption, not more than % 0,5 0,5 0,5 Change in properties under UV irradiation, not more than h 1000 1000 1000 Mastic bitumen-polymer MKTN
Usage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
The peculiarity of bitumen-polymer mastic MKTN is in the widest temperature range of its application (from -200 to +300 degrees). The usage regulations developed by the manufacturer for this mastic include: the device and repair of all types of roofs (pitched and flat, in combination with rolled waterproofing materials, glass fabrics and without them), for waterproofing of buried objects (foundations, cellars, piles, etc.)
Mastic protective polymeric aluminum №57
Usage: Mastic roofs, Parking of cars, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.