The claimed characteristics of the materials sold by us may differ only for the better
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on request
- Description
- Additional information
- Questions & Answers
Description
TehnoelastMost C is a roll waterproofing material designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects bridge structures on steel orthotropic slabs, as well as the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt is laid directly on the waterproofing roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
TechnoelastMost C is produced by TechnoNICOL concern on the basis of bitumen with the addition of APP-modifier, the use of which in the production of the material allows achieving high heat resistance values. Bottom coating of the material – adhesive film for fusing, top coating – fine-grained sand.
Additional information
Material Marking | EPG |
---|---|
Material of manufacture | Bitumen (SBS) |
Winding, m | 8 |
Basis of material | Polyester |
Cover (bottom) | Membrane |
Cover (top) | Membrane |
Roll width, m | 1 |
Temperature of flexibility on the bar, C | -20 |
Heat resistance, С | +110 |
Specific gravity, kg / m2 | 6 |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
-
You've just added this product to the cart:
Geotextile non-woven needle-punched 300
Read MoreQuick viewGeotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
-
Mastics waterproofing № 24 (MGTN)
Usage: Inversion roofs, Parking of cars, Waterproofing of foundations
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
-
You've just added this product to the cart:
Mastic protective polymeric aluminum №57
Read MoreQuick viewMastic protective polymeric aluminum №57
Usage: Mastic roofs, Parking of cars, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
-
Mastic water-emulsion №33
Usage: Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations
Waterproofing water-based mastic cold application Tekhnonikol No. 33 – modified latex and polymer modifiers, does not contain organic solvents. The peculiarity of this mastic is the absence of solvents, which makes it possible to use it in internal premises, it can be applied either mechanically (with the help of a sprayer) or manually (with a roller and brush).
-
Woven Geotextile 40-40 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Forest and access roads, Ground retaining walls, Horizontal reservoir drainage, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 40 is a woven fabric with the lowest strength characteristics in the woven geotextile line. It is used mainly as a filtering or separating layer, rarely for reinforcement.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 -
You've just added this product to the cart:
Mastics roofing waterproofing №21 (Technomast)
Read MoreQuick viewMastics roofing waterproofing №21 (Technomast)
Usage: Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. An important difference between roofing mastics and waterproofing mastics is the presence of ultraviolet stabilizers.
-
You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreQuick viewSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Usage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
Связанные материалы
-
Woven Geotextile 150-150 (PP)
Usage: Airport, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Parking lots with heavy equipment, Railways, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, Strengthening the foundations of railway embankments, Stylobates loaded, The device of drainage systems
- Woven geotextile 150 is the most durable woven geotextile in the woven polypropylene fabric line, high uniform (longitudinal and transverse) strength of the geotextile makes it possible to use it at objects with increased reliability requirements (NPPs, CHPPs, Airports, railways, etc.)
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 -
You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreQuick viewSurfacing waterproofing material Technoelast Thermo EPP
Usage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
-
You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreQuick viewSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Usage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
-
You've just added this product to the cart:
Geomembrane HDPE / LLDPE with geotextile (double-sided thermal bonding)
Read MoreQuick viewGeomembrane HDPE / LLDPE with geotextile (double-sided thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
-
You've just added this product to the cart:
Geomembrane HDPE / LLDPE with geotextile (one-side thermal bonding)
Read MoreQuick viewGeomembrane HDPE / LLDPE with geotextile (one-side thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (one-side thermal bonding) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.