The claimed characteristics of the materials sold by us may differ only for the better
Materials for the construction of stylobate parts with high loads
Geo-grating polypropylene biaxial SD with geotextile
Usage: Автостоянки с тяжелой техникой, Дорожное строительство, Защита от камнепадов, Контейнерные терминалы, Лесные и подъездные дороги, Материалы для устройства автостоянок, Нагруженные стилобаты, Парковки легковых автомобилей, Укрепление обочин, Усиление оснований железнодорожных насыпей
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use, geotextile fulfills the function of the separation-filtering layer.
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Geomembrane anchor (anchor plate)
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LDPE smooth without thermal bonding
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste, Waterproofing of road surfaces
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LLDPE with geotextile (double-sided thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LLDPE with geotextile (one-side thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (one-side thermal bonding) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane shaped spike
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geotextile non-woven needle-punched 550
Usage: “The wall in the ground”, Airport, Concrete preparation, Construction of motorways, Deep drainage, Protection of waterproofing foundations, Railways, Stylobates loaded, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 600
Usage: Airport, Concrete preparation, Deep drainage, Protection of waterproofing foundations, Railways, Stylobates loaded, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
PVC Geomembrane Logicbase V-SR (Logicroof T-SL) 1.5 / 2.0 mm
Usage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
PVC Geomembrane Plastfoil U 2.0 mm Penoplex
Usage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
- Plastfoil U 2.0 (GEO) is a non-reinforced PVC membrane with a thickness of 2 mm (a thickness of 1.5 mm is possible), used for waterproofing various underground structures.
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Usage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Usage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
Woven Geotextile 150-150 (PP)
Usage: Airport, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Parking lots with heavy equipment, Railways, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, Strengthening the foundations of railway embankments, Stylobates loaded, The device of drainage systems
- Woven geotextile 150 is the most durable woven geotextile in the woven polypropylene fabric line, high uniform (longitudinal and transverse) strength of the geotextile makes it possible to use it at objects with increased reliability requirements (NPPs, CHPPs, Airports, railways, etc.)
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 Woven geotextile high strength 500-100 / 500-50 (PET)
Usage: Airport, Base of the roadway, Deep drainage, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landscaping, Railways, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, Strengthening the foundations of railway embankments, Stylobates loaded, The device of drainage systems
- Woven geotextile 500 is one of the most sturdy woven geotextiles (among the warehouse items), guaranteeing the tensile strength at a longitudinal 6% elongation of at least 250 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven Geotextile High Strength 600-100 / 600-50 (PET)
Usage: Airport, Base of the roadway, Deep drainage, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landscaping, Railways, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, Strengthening the foundations of railway embankments, Stylobates loaded, The device of drainage systems
- Woven Geotextile 600 is one of the most durable woven geotextiles (among the warehouse items), guaranteeing the tensile strength at a longitudinal 6% elongation of at least 300 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven geotextile high strength 800-100 / 800-50
Usage: Армирование склонов, Аэропорт, Глубинный дренаж, Горизонтальный пластовой дренаж, Грунтовые подпорные стены, Дренаж подпорных стен, Дренажный слой, Железные дороги, Ландшафтный дизайн, Нагруженные стилобаты, Основание дорожного полотна, Укрепление дорожного покрытия, Укрепление откосов, Усиление оснований железнодорожных насыпей, Устройство дренажных систем
- Woven geotextile 800-100 is the most durable woven material on the domestic market (among the warehouse items), guaranteeing the tensile strength at a longitudinal 6% elongation of at least 400 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420