The claimed characteristics of the materials sold by us may differ only for the better
- You've just added this product to the cart:
Fiberglass geogrid with geotextile
Read MoreБыстрый просмотрFiberglass geogrid with geotextile
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm along across SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % from 50 to 150 - You've just added this product to the cart:
Geo-grating anti-erosion green (slope geomat)
Read MoreБыстрый просмотрGeo-grating anti-erosion green (slope geomat)
1.15 $ – 1.23 $ Approximate middle wholesale price per square meterUsage: Anti-erosion measures, Anti-landslide measures, Armorranean mounds, Drainage of retaining walls, Landscaping, Protection against landslides, Reinforcement of slopes, Reinforcing the roadbed, Sea coast to the bay, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes
- Green anti-erosion geogrid (geomat) – used to protect slopes, slopes from landslides and wind erosion, to strengthen slopes, cones of bridges, protection against erosion of shores and also with landscape design.
35 50 Relative deformation at break (elongation at break), longitudinal / transverse direction, not more than,% 15 / 15 15 / 15 Tensile strength (breaking load), along / across, not less than, kN / m 35 / 15 50 / 15 Resistant to aggressive environment, pH, pH 1-13 Resistance to ultraviolet radiation, not less than,% 90 Resistance to microorganisms, not less than,% 90 Distance between longitudinal columns, no more, mm 25 40 Weight per unit surface (surface density), g / m2 300 ± 10 400 ± 20 Wave height, not less than, mm 8 ± 2 Roll size Width, m, ± 0,05 480 ± 10 Length in roll, m, ± 0,1 80 – 100 - You've just added this product to the cart:
Geo-grating polyester in asphalt (impregnation with bitumen)
Read MoreБыстрый просмотрGeo-grating polyester in asphalt (impregnation with bitumen)
1.10 $ – 2.50 $ Approximate middle wholesale price per square meterUsage: Airport, Forest and access roads, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Polyester geogrid with bituminous impregnation (impregnation is used to improve adhesion with asphalt), is used for reinforcing asphalt-concrete layers in road construction, in order to prevent the formation of cracks and sprawl of the roadway.
30 / 30 50 / 50 80 / 80 100 / 100 Сырьё Полиэфир [PET] Пропитка Дисперсия на основе битума Прочность при растяжении (вдоль/поперёк), не менее, кН/м 30 / 30 50 / 50 80 / 80 100 / 100 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 190 ± 10 250 ± 10 370 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 - You've just added this product to the cart:
Geo-grating polypropylene biaxial
Read MoreБыстрый просмотрGeo-grating polypropylene biaxial
0.85 $ – 1.44 $ Approximate middle wholesale price per square meterUsage: Base of the roadway, Forest and access roads, Materials for the arrangement of parking places, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Road construction, Strengthening of pavement, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 - You've just added this product to the cart:
Geo-grating polypropylene biaxial (orange)
Read MoreБыстрый просмотрGeo-grating polypropylene biaxial (orange)
1.13 $ Approximate middle wholesale price per square meterUsage: Base of the roadway, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of slopes, Road construction, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation
2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 SD-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or 65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 - You've just added this product to the cart:
Geo-grating polypropylene biaxial SD with geotextile
Read MoreБыстрый просмотрGeo-grating polypropylene biaxial SD with geotextile
2.38 $ Approximate middle wholesale price per square meterUsage: Автостоянки с тяжелой техникой, Дорожное строительство, Защита от камнепадов, Контейнерные терминалы, Лесные и подъездные дороги, Материалы для устройства автостоянок, Нагруженные стилобаты, Парковки легковых автомобилей, Укрепление обочин, Усиление оснований железнодорожных насыпей
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use, geotextile fulfills the function of the separation-filtering layer.
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 Geo-grating uniaxial polyester
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SPSS – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 - You've just added this product to the cart:
Geo-grid black erosion black (slope geomat)
Read MoreБыстрый просмотрGeo-grid black erosion black (slope geomat)
1.12 $ – 1.23 $ Approximate middle wholesale price per square meterUsage: Anti-erosion measures, Anti-landslide measures, Armorranean mounds, Drainage of retaining walls, Landscaping, Protection against landslides, Reinforcement of slopes, Reinforcing the roadbed, Sea coast to the bay, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes
- Anti-erosion geogrid (geomat) – is used to protect slopes, slopes from landslides and wind erosion, to strengthen slopes, cones of bridges, protection from erosion of shores and also in landscape design.
35 50 Relative deformation at break (elongation at break), longitudinal / transverse direction, not more than,% 15 / 15 15 / 15 Tensile strength (breaking load), along / across, not less than, kN / m 35 / 15 50 / 15 Resistant to aggressive environment, pH, pH 1-13 Resistance to ultraviolet radiation, not less than,% 90 Resistance to microorganisms, not less than,% 90 Distance between longitudinal columns, no more, mm 25 40 Weight per unit surface (surface density), g / m2 300 ± 10 400 ± 20 Wave height, not less than, mm 8 ± 2 Roll size Width, m, ± 0,05 480 ± 10 Length in roll, m, ± 0,1 80 – 100 - You've just added this product to the cart:
Geo-polyester in the ground (impregnation of PVC)
Read MoreБыстрый просмотрGeo-polyester in the ground (impregnation of PVC)
1.10 $ – 2.77 $ Approximate middle wholesale price per square meterUsage: Airport, Base of the roadway, Container terminals, Landfills, Parking lots with heavy equipment, Railways
- Polyester geogrid with impregnation on the basis of PVC is used to strengthen roadbeds in the base with insufficient bearing capacity in order to prevent the formation of stakes, cracks, etc.
50 / 50 100 / 100 150 / 150 200 / 200 Сырьё Полиэфир [PET] Пропитка ПВХ Прочность при растяжении (вдоль/поперёк), не менее, кН/м 50 / 50 100 / 100 150 / 150 200 / 200 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 250 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 Geo-polyester with a substrate
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geo-shielding biaxial “Econom”
0.70 $ Approximate middle wholesale price per square meterUsage: Fencing for construction works, Fencing for road works, Fencing of hazardous objects
- The grid is uniaxial, C1-2 – thanks to its bright color, strength and elasticity can be used for fencing during construction, road works, fencing of sports, motorcycle and ski slopes, protection from snow. Ultraviolet stabilization is 5 years.
Characteristic of STREN-C1-6 Width, m. 1 Length, m. By request, up to 200 Cell Form square Material polypropylene Specific gravity, g / m2 up to 60 T.,-/+ – 70 120 Geogrid C1
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SPSS – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 - You've just added this product to the cart:
Geogrid polyethylene uniaxial CO
Read MoreБыстрый просмотрGeogrid polyethylene uniaxial CO
1.80 $ – 5.01 $ Approximate middle wholesale price per square meterUsage: Anti-landslide measures, Antilock dykes, Armorranean mounds, Forest and access roads, Ground retaining walls, Mooring walls, Noise Shafts, Ponds and reservoirs, Reinforcement of slopes, Reinforcing the roadbed, Shores of rivers and canals
- The uniaxial geogrid is used for the construction of soil retaining walls within the framework of a single construction system, it can also be used for anti-landslide measures, the construction of approaches to bridges and other soil fortifications.
Conventional designation of a geogrid Stretch load in the longitudinal direction, not less than, kN / m: Surface density, g / m2, + 3% -10% Tensile strength with allowance for creep for 120 years of operation at a temperature of +20 ºС, kN / m at rated load at a relative elongation 2% 5% CO-55 55 12 25 410 24,7 CO-80 80 20 40 600 35,5 CO-90 90 23 46 690 40,4 CO-110 110 29 58 860 49,5 CO-120 120 30 60 940 54,2 CO-140 140 35 70 1100 62,5 CO-160 160 40 80 1250 69,0 CO-162 162 42 84 1400 69,8 CO-170 170 45 90 1500 73,3 CO-180 180 47 94 1600 77,3 - You've just added this product to the cart:
Geogrid protective one-axis C1-2
Read MoreБыстрый просмотрGeogrid protective one-axis C1-2
1.57 $ Approximate middle wholesale price per square meterUsage: Fencing for construction works, Fencing for road works, Fencing for ski slopes, Fencing of sports routes, Motorcycle track guard
- The grid is uniaxial, C1-2 – thanks to its bright color, strength and elasticity can be used for fencing during construction, road works, fencing of sports, motorcycle and ski slopes, protection from snow. Ultraviolet stabilization is 5 years.
Characteristic of STREN-S1-2 Width, m. 1 Length, m. By request, up to 200 Cell Form oval Material polypropylene Specific gravity, g / m2 up to 130 Operating temp., – / + – 70 120 Geogrids fiberglass
Usage: Airport, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid of SSNP – can be used for reinforcing asphalt concrete strips instead of classical polyester geogrid with bituminous impregnation, if the projected lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Geogrids from glass fiber
0.85 $ – 1.60 $ Approximate middle wholesale price per square meterUsage: Airport, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Reinforcing the roadbed, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid – can be used for reinforcing asphalt concrete instead of classical polyester geogrid with bituminous impregnation, if the predicted lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 - You've just added this product to the cart:
Volumetric geogrid with perforation
Read MoreБыстрый просмотрVolumetric geogrid with perforation
80.00 $ Цена за м² (от)Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ODM 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at
– 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56
- You've just added this product to the cart:
Volumetric geogrid without perforation
Read MoreБыстрый просмотрVolumetric geogrid without perforation
155.00 $ Цена за м² (от)Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ОДМ 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at – 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56
