TPM

You've just added this product to the cart:

Profile for the expansion joint of universal insert TPM-11 | TPM-14

Быстрый просмотр

Profile for the expansion joint of universal insert TPM-11 | TPM-14

Usage: The device of expansion joints, The device of expansion joints in floors, The device of strain joints with medium loads

Deformation profile of TPM is used for the device of narrow expansion joints, 7/12 mm wide. The TPM profile can withstand the loads produced by passenger cars, as well as pedestrian loads of high intensity. Installation of TPA profiles – a mortgage, is installed under the finish coat with a total thickness of 12, 15, or 20 mm, depending on the modification of the seam. The feature of the TPM seam is the complete sealing of the expansion joint when used in conjunction with the sealant (the profile provides special grooves for sealing the sealant). Installation of a mortgage for a finish coat with a thickness of at least 11/14 mm, depending on the modification of the seam.

Characteristics and modifications of the deformation profile (double) TPM-11 | TPM-14

Deformation profile	Compensator	Types of expansion joints	Displacements, mm			Dimensions, mm			Load, MPa
Deformation profile	Compensator	Types of expansion joints	Compression	Stretching	Shift	A	B	C	Load, MPa
TPM-11/007	PM1-007		2	2	1	7	9	64	0,6
TPM-14/012	PM1-007		2	2	1	12	9	64	0,6

255.00 $ Price per running meter

Without loads (0 MPa, decorative)

Decorative profiles for non-exploitable joints (interior: walls, floors)

Decorative PSA profile

For the device of unexploited (or exploited in everyday conditions) deformation seams, surface mounting without tools, the width of the seam 30, 50, 40-50, 50-100, 60-100, depending on the modification.

Decorative PSA profile corner

For the device of unexploited (or exploited in everyday conditions) deformation seams when mating the seam with a wall, an overhead installation. Possible widths of the seam depending on the modification (mm): 30-33, 30-35, 45-50, 60-85, 70-90

For expansion joints in walls and floors (without loads)

Profile for expansion joints in the walls and floor of DGK (20 - 125 mm)

DGK is a series of deformation profiles for the construction of expansion joints in walls and facades. The width of the designed expansion joint is from 20 to 125 mm, the installation can be both overhead and mortgage (for the thickness of the finish coating 2, 15 mm). DVA can be made in the angular variant.

DGK-0 / DGK-2 / DGK-15

Profile for the expansion joints in the walls and floor of the DSHS (50 - 210 mm)

DSHS - a series of deformation profiles for the device of expansion joints on unexploited surfaces. The width of the deformable joint is from 60 to 210 mm, the installation can be both overhead and mortgage (for the thickness of the finish coating 16 mm).

DSHS-0 / DSHS-0 Double / DSHS -16 / DSHS -16 Double

For expansion joints in facades

Profile for expansion joints in facades of DGC FAS (20 - 120 mm)

DGC FAS - a series of special deformation profiles for the device of expansion joints in facades. The width of the designed expansion joint is from 20 to 120 mm, the installation can be either a mortgage (for a 2 mm finish coat) or an insertion method.

DGA-FAS plug-in / DGC-FAS invoice

Pedestrian loads (0,03+ MPa)

For expansion joints in floors and walls of household premises

Profile for deformation seam of DSHL

For the device of expansion joints of width 20-40 mm in floors with minimum pedestrian loads (not suitable for use in commercial premises), it can also be used for joints in walls. The method of installing the mortgage (for the finish coating 15, 30 and 50 mm), as well as a waybill.

DSHL-0 / DSHL-15 / DSHL-30 / DSHL-50

For expansion joints in walls and floors (medium passages)

Profile for the expansion joints in the walls and floor of the DSA (50 - 205 mm, aluminum compensator)

DSHA - a series of deformation profiles for the device of expansion joints in the walls and floors of rooms with medium traffic. The width of the deformable joint is from 50 to 205 mm, the installation can be both overhead and mortgage (for the thickness of the finish coating 15, 50, 75 mm). The DDA can be made in the angular variant..

DSHA-15 / DSHA-50 / DSHA-75

Profile for the expansion joints in the walls and floor of the DSHV (25 - 65 mm), compensator TEP

DSHV - a series of deformation profiles for the device of expansion joints on exploited surfaces in commercial premises with high exploitation, as well as in ground household parking lots with minimal loads. The width of the deformable joint is from 25 to 65 mm, the installation can be both overhead and mortgage (for the thickness of the finish coating 15, 20, 35, 50 mm)..

DSHV-0 / DSHV-15 / DSHV-20 / DSHV-35 / DSHV-50

Shopping centers (0,1 + MPa)

For expansion joints in floors and walls of shopping centers

Profile for the deformation seam of DSHO (25 - 60 mm) TEP

For expansion joints with a width of 25-65 mm in the floors of rooms with increased cross-country traffic (shopping centers, cinemas, etc.). The method of installing a mortgage (for a 24 mm finish coat), as well as a waybill.

DSHO-0 / DSHO-24

Profile for the deformation seam of DSHL (15 - 40 mm) TEP

For expansion joints with a width of 15-40 mm in the floors of rooms with increased cross-country traffic (shopping centers, cinemas, etc.). Method of installation of the mortgage (for the finish coating 15 mm). It is also available in a corner modification for the device of expansion joints when mating with a wall.

DSHL -15

Cars (0,3 MPa)

For expansion joints in external facades with high loads

Profile for a deformation seam DSHKA FAS (70 - 100 mm) TEP

For expansion joints of width 70, 80, 100 mm in facades with high loads. Method of installation of waybills. The compensator is protected from ultraviolet radiation, in case of damage it easily changes.

For expansion joints in open parking lots with small loads

Profile for the expansion joints in the floor of the DSHA TS (245 - 335 mm), aluminum compensator

DSHA TS is a wide profile for expansion joints, designed especially for wide joints (245, 285 and 335 mm) in open car parks with a small flow, and also for the construction of seams in shopping centers. Installation of the mortgage (for the finish coating 20, 30, 50 and 70 mm), as well as a waybill.

DSHA.TS-0 / DSHA.TS-20 / DSHA.TS-30 / DSHA.TS-100

Profile for expansion joints in the walls and floor of the DShV (25 - 65 mm), compensator TEP

DSHV-0 / DSHV-15 / DSHV-20 / DSHV-35 / DSHV-50

Hermetic sealing of expansion joints with medium loads

Profile for sealing of expansion joints in the floor of TPM (7 - 12 mm)

TPM - a series of deformation profiles with special grooves for use in conjunction with the sealant, is used to fully seal the expansion joint where it is needed. Mounted under the finish coating thickness of 11 or 14 mm.

For expansion joints in the floors of shopping centers and parking lots without vertical displacements

Profile for sealing of expansion joints in floor TPA (9mm)

TPA - a series of deformation profiles for the device of a rigid deformation seam (not subject to vertical displacements, is mounted under the finish coating with a thickness of 12, 15 or 20 mm.

For the device of expansion joints in ground parking with medium loads (without freight transport)

Profile for sealing the expansion joints in the floor DSHA.-T (85 mm), aluminum compensator

DSHA.T - a series of profiles for expansion joints that withstand the average load on ground parking and roads. Installation of a mortgage for the finish coating thickness of 30 mm.

DSHA.Т - 30 / DSHA .Т - 50 / DSHA.Т - 70

Passenger vehicles, underground parking (0,7 + MPa)

For expansion joints in underground parking lots, warehouses (without forklifts on solid and banded tires) and public roads with medium load.

Profile for the expansion joint DSHKA (20-90 mm) TEP

For the device of expansion joints with a width of 20-90 mm in underground parking lots and highways. The method of installing a mortgage for the finish coating thickness of 75, 50, 30, 16 mm

DSHKA-0 / DSHKA-16 / DSHKA-30 / DSHKA-50 / DSHKA-75

Freight vehicles (20t), high loads (0.9+ MPa)

For hermetic sealing of expansion joints in underground parking lots with any loads, bridges

Profile for expansion joint in underground parking lots DPP (20-55mm), EPDM compensator

DPP is the most popular solution for the construction of expansion joints in underground parking lots, the reason for this popularity is the high spacing of the seam (20-55 mm) without the need for cutting to the exact size, complete tightness, the possibility to use the DPP as a "lying policeman". DPP you can meet in almost all underground parking lots.

Profile for deformation seam in underground parking lots (40-50 mm), steel compensator possible

DPS is a series of profiles used for the device of hermetic sealing of expansion joints in underground parking lots, as well as for DPP - a waybill and has a floating width of a customized deformation seam. The difference is that the expansion joints and strips can be made of different materials.

Profile for a deformation seam in underground parking areas (30 - 120 mm), EPDM compensator

For the device of expansion joints in width from 30 to 120 mm in underground parking lots and bridges. The EPDM compensator makes the seam as tight as possible, and the compensator is resistant to acidic environments and has a high elasticity. The installation of a mortar for a 30 or 50 mm finish can be supplied in a corner version for sealing joints in conjunction with walls.

DSHN-30 / DSHN-50

Profile for a deformation seam in underground parking lots DPV (40-60 mm), EPDM compensator

For expansion joints in width from 40-60 mm in underground parking lots and bridges. The EPDM compensator makes the seam as tight as possible, and the compensator is resistant to acidic environments and has a high elasticity. Installation of the mortgage for the finish coating of 8 mm..

For waterproofing deformation seam on underground and multilevel parking places at interface with PVC-membranes

Profile for the expansion joints in the floor DPSH (50 mm), EPDM compensator

DPSH is an aluminum deformation seam with a fully hermetic EPDM expansion joint, and the lateral parts of the joint are PVC-metal welded with PVC membranes for the installation of waterproofing of underground parking floors, as well as roofs with high exploitation. PVC is compatible with membranes of all manufacturers (yes, with Sikaplan too).

DPSH-30 / DPSH-50

For existing deformation seam with high loads (mortgage installation)

Profile for the deformation seam device DSHA.T-UGL.2

DSHA.T-UGL.2 - an aluminum profile embedded in the deformation seam, used to weld 85 mm wide seams on existing carpets of underground parking lots and roads.

Transport on all-metal wheels (22+ MPa)

For expansion joints in warehouses, industrial plants

Profile for a deformation seam in underground parking lots DVA (50 mm)

For expansion joints with a width of 50 mm at production and warehouse enterprises (where forklifts with all-metal and cast tires work) and others. The design of the seam provides an unstressed passage. Installation of a mortgage for a 30 or 50 mm finish.

DVA-30 / DVA-50

For deformation joints for parking and passage of caterpillar, military equipment

Profile for the expansion joint in the underground parking DVS (50 mm)

For the device of expansion joints with a width of 20-65 mm at special parking and crawl facilities, caterpillar, military equipment and machinery on all-metal wheels. Installation of a mortgage under the finish coat 11 mm.