Deformation profiles for seams

  • You've just added this product to the cart:

    Profile for a deformation joint universal operated bill DVA-50

    Profile for a deformation joint universal operated bill DVA-50

    Usage:


    Deformational profile Dva-50 (Dilatation device Dva-50 Akvabarer) is used for the construction of expansion joints on highly stressed surfaces (the deformation seam withstands a pressure of 22 MPa, which allows it to be used for seaming at military ranges, as well as for warehouses with loaders on steel wheels and other rooms with extremely high loads). Also, using the deformation profiles, the DWA allows to ensure the unstressed passage of wheeled vehicles.


    Deformation profile Compensator Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C 22
    DVA–50 / 050 ВА1–110 15 15 40 50 118 232

     

    5,185.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for a deformation seam facade consignment DGK-FAS 2

    Profile for a deformation seam facade consignment DGK-FAS 2

    Usage:


    Deformation profile DGC-FAS 2 (Dilatation device AquaBarrier) – an overhead deformation sealant compensator, equipped with special facade aluminum slats. The compensator is made of thermoplastic elastomer (TEP). It is used for the device of hermetic sealing of the expansion joint on the facades of buildings and on unexploited surfaces. The width of the deformable joint is from 30 to 120 mm. From the deformation profile DGC FAS differs by a more reliable fixation scheme.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B=C
    DGK-FAS/030 G2–028 1 1 2 30 34
    G5–028 4 12 8
    DGK-FAS/040 G2–038 2 2 4 40 44
    G5–038   6 22 12
    DGK-FAS/050 G2–048 2 2 4 50 54
    G5–048 8 26 16
    DGK-FAS/070 G5–068 12 38 24 70 74
    DGK-FAS/090 G5–088 16 50 32 90 94
    DGK-FAS/120 G5–118 22 62 44 120 124
    Price per running meter
  • You've just added this product to the cart:

    Profile for a deformation seam facade plug-in DGA-FAS

    Profile for a deformation seam facade plug-in DGA-FAS

    Usage:


    Deformation profile DGC-FAS (Dilatation device Aquabarrier) is an insertion deformation sealed compensator equipped with special facade aluminum slats. The compensator is made of thermoplastic elastomer (TEP). It is used for the device of hermetic sealing of the expansion joint on the facades of buildings and non-exploitable surfaces. The width of the deformable joint is from 30 to 120 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B=C
    DGK-FAS/030 G2–028 1 1 2 30 30
    G5–028 4 12 8
    DGK-FAS/040 G2–038 2 2 4 40 40
    G5–038   6 22 12
    DGK-FAS/050 G2–048 2 2 4 50 50
    G5–048 8 26 16
    DGK-FAS/070 G5–068 12 38 24 70 70
    DGK-FAS/090 G5–088 16 50 32 90 90
    DGK-FAS/120 G5–118 22 62 44 120 120
    310.00 $575.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the deformation seam versatile waybill double DSHS-0 (DSHS-0-UGL)

    Profile for the deformation seam versatile waybill double DSHS-0 (DSHS-0-UGL)

    Usage:


    Deformational profile of DPS-0 / DFS-0-UGL (Dilatation device Aquabarrier) is intended for the device of expansion joints with a width of 30 to 200 mm on walls, office, administrative and other buildings, as well as for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. The installation of the seam – a bill of lading, mounted directly on the finish coat.


    Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C
    DSHS-0 / 060 C2–055 4 20 30 60 137 137
    DSHS-0-UGL / 060 99 99
    DSHS-0 / 100 C2–100 16 50 40 100 177 177
    DSHS-0-UGL / 100 139 139
    DSHS-0 / 110 C3–105 12 60 50 110 187 187
    DSHS-0-UGL / 110 149 149
    DSHS-0 / 130 C3–125 23 80 70 130 207 207
    DSHS-0-UGL / 130 169 169
    DSHS-0 / 150 C2–140 38 100 80 150 227 227
    DSHS-0-UGL / 150 189 189
    DSHS-0 / 160 C3–155 26 110 90 160 237 237
    DSHS-0-UGL / 160 199 199
    DSHS-0 / 200 C2–195 44 130 100 200 277 277
    DSHS-0-UGL / 200 239 239

     

    730.00 $1,250.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the deformation weld of the wall-mounted DGK-0 / DGK-0 UGL

    Profile for the deformation weld of the wall-mounted DGK-0 / DGK-0 UGL

    Usage: 


    Deformation profile DGC-0 (Dilatation device AquaBarrier) – an overhead deformational sealer compensator, which consists of two aluminum straps with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the settable joint is from 20 to 125 mm. Available in two versions – angular and straight.


    Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B=C
    DGK-0 G2-018 1 1 2 20 72
    DGK–0–UGL / 025 G5-018 2 10 5 25 51
    DGK–0 / 030 G2-028 1 1 2 30 82
    DGK–0–UGL / 025 G5-028 4 12 8 35 61
    DGK–0 / 040 G2-038 2 2 4 40 92
    DGK–0–UGL / 025 G5-038 6 22 12 45 71
    DGK–0 / 050 G2-048 2 2 4 50 102
    DGK–0–UGL / 025 G5-048 8 26 16 55 81
    DGK–0 / 070 G5-068 12 38 24 70 122
    DGK–0–UGL / 025 75 101
    DGK–0 / 090 G5-088 16 50 32 90 142
    DGK–0–UGL / 025 95 121
    DGK–0 / 120 G5-188 22 62 44 120 172
    DGK–0–UGL / 025 125 151
    345.00 $640.00 $ Розничная цена за погонный метр
  • You've just added this product to the cart:

    Profile for the expansion joint decorative patch PSA angular

    Profile for the expansion joint decorative patch PSA angular

    Usage:


    The PSA strain profile is used exclusively for decorative purposes, it is made of solid aluminum (without compensator) for joints in shopping centers, administrative and office buildings, and apartments. Mounting of the PSA deformation profile with the width of the seam 30, 50 mm can be carried out with the help of a bezanker method (due to a special latch fixing the bar inside the seam). The profiles PSA-100, 150 and 180 are assembled using anchors (an anchor in the kit).


    Deformation profile Displacements, mm Dimensions, mm
    Compression Stretching Shift A B C
    PSA angular–040 9 9 30-33 40 40
    PSA angular–050 19 19 30-35 50 50
    PSA angular–075 20/30 20/31 45-50 75 75
    PSA angular–110 50 50 60-85 110 110
    PSA angular–130 70 70 70-90 130 130

     

     

    350.00 $1,140.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint of decorative patch PSA

    Profile for the expansion joint of decorative patch PSA

    Usage:


    The PSA strain profile is used exclusively for decorative purposes, it is made of solid aluminum (without compensator) for joints in shopping centers, administrative and office buildings, and apartments. Mounting of the PSA deformation profile with the width of the seam 30, 50 mm can be carried out with the help of a bezanker method (due to a special latch fixing the bar inside the seam). The profiles PSA-100, 150 and 180 are assembled using anchors (an anchor in the kit).


    Deformation profile Displacements, mm Dimensions, mm
    Compression Stretching Shift A B C
    PSA-050 10 10 30 50 50
    PSA-075 15 15 50 75 75
    PSA-100 40/33 40/33 40-50 100 100
    PSA-150 50 50 50-100 150 150
    PSA-180 60 60 60-100 180 180

     

    320.00 $1,205.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint of the wall DGC-2 / DGK-UGL

    Profile for the expansion joint of the wall DGC-2 / DGK-UGL

    Usage: 


    Deformation profile DGC-2 (Dilatation device Aquabarrier) – a mortgage (under the tile or any other finishing coating with a thickness of 2 mm), a deformable sealing expansion joint consisting of two aluminum straps with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the settable joint is from 20 to 125 mm. Available in two versions – angular and straight.


    Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B=C
    DGK-2 / 020 G2-018 1 1 2 20 72
    DGK–2–UGL / 025 G5-018 2 10 5 25 51
    DGK–2 / 030 G2-028 1 1 2 30 82
    DGK–2–UGL / 035 G5-028 4 12 8 35 61
    DGK–2 / 040 G2-038 2 2 4 40 92
    DGK–2–UGL / 045 G5-038 6 22 12 45 71
    DGK–2 / 050 G2-048 2 2 4 50 102
    DGK–2–UGL / 055 G5-048 8 26 16 55 81
    DGK–2 / 070 G5-068 12 38 24 70 122
    DGK–2–UGL / 075 75 101
    DGK–2 / 090 G5-088 16 50 32 90 142
    DGK–2–UGL / 095 95 121
    DGK–2 / 120 G5-188 22 62 44 120 172
    DGK–2–UGL / 125 125 151

     

    340.00 $630.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint of the wall DGK-15

    Profile for the expansion joint of the wall DGK-15

    Usage: 


    Deformation profile DGK-15 (Dilatation device Aquabarrier) – a mortgage (under the tile or any other finishing coating with a thickness of 15 mm), a deformable sealing expansion joint consisting of two aluminum bars with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the deformable joint is from 18 to 135 mm. Available in two versions – angular and straight.


    Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B/C
    DGK-15 / 018 Г2-018 1 1 2 18 24/92
    DGK–15–UGL / 035 Г5-018 2 10 5 35 22/72
    DGK–15 / 028 Г2-028 1 1 2 28 34/102
    DGK–15–UGL / 045 Г5-028 4 12 8 45 32/82
    DGK–15 / 038 Г2-038 2 2 4 38 44/112
    DGK–15–UGL / 055 Г5-038 6 22 12 55 42/92
    DGK–15 / 048 Г2-048 2 2 4 48 54/122
    DGK–15–UGL / 065 Г5-048 8 26 16 65 52/102
    DGK–15 / 068 Г5-068 12 38 24 68 74/142
    DGK–15–UGL / 85 85 72/122
    DGK–15 / 088 Г5-088 16 50 32 88 94/162
    DGK–15–UGL / 105 105 92/142
    DGK–2 / 118 Г5-188 22 62 44 118 124/192
    DGK–15–UGL / 135 135 122/172
    390.00 $685.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint of universal insert TPM-11 | TPM-14

    Profile for the expansion joint of universal insert TPM-11 | TPM-14

    Usage:


    Deformation profile of TPM is used for the device of narrow expansion joints, 7/12 mm wide. The TPM profile can withstand the loads produced by passenger cars, as well as pedestrian loads of high intensity. Installation of TPA profiles – a mortgage, is installed under the finish coat with a total thickness of 12, 15, or 20 mm, depending on the modification of the seam. The feature of the TPM seam is the complete sealing of the expansion joint when used in conjunction with the sealant (the profile provides special grooves for sealing the sealant). Installation of a mortgage for a finish coat with a thickness of at least 11/14 mm, depending on the modification of the seam.


    Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C
    TPM-11/007 PM1-007 2 2 1 7 9 64 0,6
    TPM-14/012 2 2 1 12 9 64 0,6

     

    255.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint universal insertion double TPA-12 | TPA-15 | TPA-20

    Profile for the expansion joint universal insertion double TPA-12 | TPA-15 | TPA-20

    Usage:


    Deformation profile TPA is used for the device of narrow deformation seams, width of 9 mm. The profile of the TPA can withstand the loads produced by passenger cars, as well as pedestrian loads of high intensity. Installation of TPA profiles – a mortgage, is installed under the finish coat with a total thickness of 12, 15, or 20 mm, depending on the modification of the seam. A rigid compensator completely prevents vertical movement of the joint during operation.


    Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa
    Сжатие Stretching Shift A B C
    TPA-12 / 010 PA1-008 9 12 9 12 62 0,6
    TPA-15 / 010 9 12 9 12 62 0,6
    TPA-20 / 010 9 12 9 12 62 0,6
    325.00 $395.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint universal single bill DSHS-0 (DSHS-UHL-0)

    Profile for the expansion joint universal single bill DSHS-0 (DSHS-UHL-0)

    Usage:


    The deformation profile of the DShS-0 / DShS-0-UGL (Dilatation device Aquabarrier) is designed for the device of expansion joints with a width of 30 to 100 mm on walls, office, administrative and other buildings, and also for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. The installation of the seam – a bill of lading, mounted directly on the finish coat.


    Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C
    DSHS-0 / 030 C1–027 2 10 10 30 107 107
    DSHS-0-UGL / 030 69 69
    DSHS-0 / 050 C1–048 8 40 40 50 128 128
    DSHS-0-UGL / 050 90 90
    DSHS-0 / 075 C1–069 19 50 50 75 149 149
    DSHS-0-UGL / 075 111 111
    DSHS-0 / 100 C1–097 2 70 70 100 177 177
    DSHS-0-UGL / 100 139 139

     

    730.00 $1,250.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for the expansion joint universal used mortgage DSHL-15 (DSHL-15 UGL)

    Profile for the expansion joint universal used mortgage DSHL-15 (DSHL-15 UGL)

    Usage:


    Deformational profile of Dshm-15 (Dshm-15 UGL) (Dilatation device Aquastop / Akvabarer DShM-15 (Dshm-15 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) with a load of 0.2 MPa, it is possible to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 15 to 40 mm in Depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the GSD 15 – a mortgage (for the finish coating from 15 mm).


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B/C
    DSHM-15/015                           DSHM-15-UGL/025 В0-032 2 2 4 15/25 35/126 0,2
    В1-032 5 5 4 35/80
    В2-032 1 2 4 35/80
    DSHM-15/020                          DSHM-15-UGL/030 В0-038 5 5 6 20/30 40/131 0,2
    В1-038 6 6 6 40/85
    В2-038 2 2 6 40/85
    DSHM-15/030                                DSHM-15-UGL/040 В0-049 9 9 8 30/40 50/141 0,2
    В1-049 10 10 8 50/95
    В2-049 2 3 8 50/95
    695.00 $810.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal expansion joint mortgage double DSHS-16 (DSHS-16 UGL)

    Profile for universal expansion joint mortgage double DSHS-16 (DSHS-16 UGL)

    Usage:


    The deformation profile of the DShS-16 (DShS-16-UGL) (Dilatation device Aquabarrier) is designed for the device of expansion joints with a width of 50 to 210 mm on walls, office, administrative and other buildings, as well as for joints on unexploited floors. The deformation profiles of the DPS series are not intended for operation. Installation of the seam – a mortgage, is installed under the finish coat with a total thickness of not more than 16 mm.


    Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C
    DSHS-16 / 050 C2–055 4 20 30 50

    70

    65 133
    DSHS-16 UGL / 070 65 112
    DSHS-16 / 090 C2–100 16 50 40 90

    110

    105 173
    DSHS-16 UGL / 110105 105 161
    DSHS-16 / 100 C3–105 12 60 50 100

    120

    116 183
    DSHS-16 UGL / 120 115 161
    DSHS-16 / 120 C3–125 23 80 70 120

    140

    136 203
    DSHS-16 UGL / 140 135 171
    DSHS-16 / 130 C2–140 38 100 80 130

    150

    145 213
    DSHS-16 UGL / 150 145 191
    DSHS-16 / 150 C3–155 26 110 90 150

    170

    165 233
    DSHS-16 UGL / 170 165 211
    DSHS-16 / 190 C2–195 44 130 100 190

    210

    205 273
    DSHS-16 UGL / 170 205 252

     

    520.00 $810.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal expansion joint operated by the DPP

    Profile for universal expansion joint operated by the DPP

    Usage:


    Deformational overhead profile DPP – the most popular, interesting and universal solution for the device of expansion joints in parking lots. Its advantages are:

    1. High seam separation (20-55 mm), without the need for grooving to the exact size
    2. Full sealing of the seam
    3. Stitching on the finish coat
    4. Possibility of painting in any color according to RAL
    5. The compensator is made of thermoplastic elastomer (TEP), resistant to chemically active media, and also preserving operating properties over a wide temperature range.

    Deformation profile DPV Aquabarrier (as well as other deformation aluminum profiles) is made of aluminum in accordance with GOST 8617-81 t GOST 22233-2001, due to this the material has high strength, chemical and corrosion resistance, durability and environmental safety.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DPV-8/050 ПН–83–АА 10 30 70 20-55 250 2,1
    ПН–81–СО
    ПН–81–СН
    2,025.00 $4,230.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal expansion joint operated DPS

    Profile for universal expansion joint operated DPS

    Usage:


    Deformational profile DPS-0 is designed specifically for the deformation joints in underground parking lots, like the seam of the DPP, has a floating width of the customized expansion joint (40-50 mm for the DPS-0/050 modification), but in a smaller range. Has a small vertical movement and can withstand any loads created by passenger cars and low-tonnage commercial vehicles. Can be executed from aluminum, stainless steel, and also steel painted in any color on RAL.

    The compensator is made of thermoplastic elastomer (TEP), resistant to chemically active media, and also preserving operating properties over a wide temperature range.


    Deformation profile Planck Kind of bar Displacements, mm Dimensions, mm
    Compression Stretching Shift A B C
    DPS-0 / 020 ПН–83–АА 4 30 30 20 195 2,1
    ПН–81–СО
    ПН–81–СН
    DPS-0 / 050 ПН–83–АА 5 30 50 40-50 230 2,1
    ПН–81–СО
    ПН–81–СН

     

    1,695.00 $4,565.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal expansion joint operated mortgage DSHN-UGL

    Profile for universal expansion joint operated mortgage DSHN-UGL

    Usage:


    The deformation profile of DSHN-UGL (Dilatation device Akvastop DSHN-UGL) angular is designed for the device of expansion joints in the construction of the floor with a load of up to 2.0 MPa, it is also used to seal joints in prefabricated metal structures. The compensator is made of EPDM rubber, resistant to ultraviolet radiation and also to high and low operating temperatures, while still protecting the ingress of moisture and dust into the sealed space. Installation of DCHN-UGL – consignment note, it is possible as an overhead installation in an existing seam with a finished finish, and a mortgage.

    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В С
    DSHN-UGL / 085 Н1–067 7 13 8 85 84 199 2
    DSHN-UGL / 115 Н1–098 25 15 30 115 115 142 2
    DSHN-UGL / 145 Н1–130 20 20 40 145 146 230 2

     

    2,250.00 $3,030.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal movement joint mortgage single DSHS-16 (DSHS-UGL-16)

    Profile for universal movement joint mortgage single DSHS-16 (DSHS-UGL-16)

    Usage:


    The deformation profile of DShS-16 (DShS-16-UGL) (Dilatation device Akvabarer) is designed for the device of expansion joints with width from 20 to 110 mm on walls, ceilings of office, administrative and other buildings, as well as for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. Installation of the seam – the mortgage for the finish coat (under the plaster) is not less than 16 mm.


    Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C
    DSHS-16 / 020 C1–027 2 10 30 20 35 102
    DSHS-16-UGL / 040 40 35 81
    DSHS-16 / 040 C1–048 8 40 40 40 55 122
    DSHS-16-UGL / 060 60 55 101
    DSHS-16 / 065 C1–069 19 50 50 65 80 147
    DSHS-16-UGL / 085 85 80 125
    DSHS-16 / 090 C1–097 22 70 70 90 105 172
    DSHS-16-UGL / 110 110 105 151

     

    755.00 $1,275.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHA.-T 0 (DSHA.-T 0)

    Profile for universal operated expansion joint bill DSHA.-T 0 (DSHA.-T 0)

    Usage:


    Deformation profile DASHA.-T-0 (DSCA.-T-0) (Dilatation device Aquastop / Aquabarrier DHA.-T-0 (DASHA.-T-0 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. including asphalt).


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHA.Т–0 / 085 А.Т1–075 10 10 15 85 253 0,7
    DSHA.Т–0–УГЛ / 085 168
    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHA.TS-0 (DSHA.TS-UHL-0)

    Profile for universal operated expansion joint bill DSHA.TS-0 (DSHA.TS-UHL-0)

    Usage:


    Deformation profile DSHA.TS-0 (Dilatation device AQUASTOP DSHA.TS-0-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: 245 (mm) / 0,9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, loaders, etc.), 285 (mm) / 0.5 MPa – (cargo vehicles up to 20t, passenger transport, etc.), 335 (mm) / 0.3 MPa – low level of loading (passenger cars, high pedestrian load). Mounted on top of the finish coat.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHA.TS–0 / 245 А.ТS1–235 50 50 28 245 417 0,9
    DSHA.TS–0–UGL / 245 332
    DSHA.TS–0 / 285 А.ТS1–275 50 50 34 285 457 0,5
    DSHA.TS–0–UGL / 285 372
    DSHA.TS–0 / 335 А.ТS1–325 50 50 40 335 507 0,3
    DSHA.TS–0–UGL / 335 422
    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHA.TS-20 (DSHA.TS-UHL-20)

    Profile for universal operated expansion joint bill DSHA.TS-20 (DSHA.TS-UHL-20)

    Usage:


    Deformation profile DASHA.TS-20 (Dilatation device AQUASTOP DASHA.TS-20-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 20 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.TS–20 / 210 А.ТS1–235 50 50 28 210

    230

    243/357 0,9
    DSHA.TS-20-UGL / 230 245/302
    DSHA.TS–20 / 250 А.ТS1–275 50 50 34 250

    270

    283/397 0,5
    DSHA.TS-20-UGL / 270 285/342
    DSHA.TS–20 / 300 А.ТS1–325 50 50 40 300

    320

    333/347 0,3
    DSHA.TS-20-UGL / 320 335/392
    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHKA-0 (DSHKA-UGL-0)

    Profile for universal operated expansion joint bill DSHKA-0 (DSHKA-UGL-0)

    Usage:


    Deformation profile of DSHKA-0 (Dilatation device Aquastop DSHKA-0-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DSHKA-0 is carried out by the overhead method directly on the finish coat.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression, mm Stretching, mm Shift, mm А B=C
    DSHKA-0/050 КЗ-044 15 35 10 50 220 1,8
    DSHKA-0-UGL/055 55 140
    DSHKA-0/060 КЗ-054 20 45 12 60 230 1,8
    DSHKA-0-UGL/065 65 150
    DSHKA-0/070 КЗ-064 30 75 15 70 240 1,8
    DSHKA-0-UGL/075 75 160
    DSHKA-0/080 КЗ-074 40 80 20 80 250 1,8
    DSHKA-0-UGL/085 85 170
    DSHKA-0/100 КЗ-094 45 80 25 100 270 1,5
    DSHKA-0-UGL/105 105 190

     

    1,975.00 $2,195.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHKA-16 (DSHKA-UGL-16)

    Profile for universal operated expansion joint bill DSHKA-16 (DSHKA-UGL-16)

    Usage:


    Deformation profile DSHKA-16 (Dilatation device Aquastop DSHKA-16-UGL) is used for the device of highly exploited expansion joints, including coping with loads produced by any vehicles and forklifts (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DSHKA-16 is carried out by a mortar method for the final coating with a total thickness of 16 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression, mm Stretching, mm Shift, mm А B/C
    DSHKA-16/050 КЗ-044 15 35 10 50 50/200 1,8
    DSHKA-UGL-16/055 55 55/130
    DSHKA-16/060 КЗ-054 20 45 12 60 60/210 1,8
    DSHKA-UGL-16/065 65 65/140
    DSHKA-16/070 КЗ-064 30 75 15 70 70/220 1,8
    DSHKA-UGL-16/075 75 75/150
    DSHKA-16/080 КЗ-074 40 80 20 80 80/230 1,8
    DSHKA-UGL-16/085 85 80/160
    DSHKA-16/100 КЗ-094 45 80 25 100 100/250 1,5
    DSHKA-UGL-16/105 105 105/180
    1,325.00 $1,545.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHKA-50 (DSHKA-UGL-50)

    Profile for universal operated expansion joint bill DSHKA-50 (DSHKA-UGL-50)

    Usage:


    Deformation profile DSHKA-50 (Dilatation device Aquastop DSHKA-50-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (except for forklifts on solid tires and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DSHKA-50 is carried out by a mortar method for the final coating with a total thickness of 50 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression, mm Stretching, mm Shift, mm А B/C
    DSHKA-50/020 КЗ-044 15 35 10 20 50/165 1.20
    DSHKA-50-UGL/040 40 55/112
    DSHKA-50/030 КЗ-054 20 45 12 30 60/175 1.20
    DSHKA-50-UGL/050 50 65/122
    DSHKA-50/040 КЗ-064 30 75 15 40 70/185 1.20
    DSHKA-50-UGL/060 60 75/132
    DSHKA-50/050 КЗ-074 40 80 20 50 80/195 1.20
    DSHKA-50-UGL/070 70 80/142
    DSHKA-50/070 КЗ-094 45 80 25 70 100/215 0.90
    DSHKA-50-UGL/090 90 105/162

     

    2,365.00 $2,585.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DSHN-30 (DSHN-UGL-30)

    Profile for universal operated expansion joint bill DSHN-30 (DSHN-UGL-30)

    Usage:


    The deformation profile of DSHN-30 / DSHN-30-UGL (Dilatation device Akvastop DSHN-30 / DSHN-30-UGL) is used to seal expansion joints on surfaces with a high degree of exploitation (maximum load of 3.0 MPa), allocates any type of motor vehicle, including including load-carrying capacity up to 40 tons, as well as any kinds of loaders. The compensator is made of EPDM rubber, resistant to ultraviolet radiation and also to high and low operating temperatures, while still protecting the ingress of moisture and dust into the sealed space. Mounting ДШН-30 – mortgage, is mounted under the finish coat with a thickness of up to 30 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В С
    DSHN-30 / 040 Н1–067 7 13 8 40 84 199 3
    DSHN-UGL-30 / 060 60 84 142
    DSHN-30 / 070 Н1–098 25 15 30 70 115 230 2,5
    DSHN-UGL-30 / 090 90 115 173
    DSHN-30 / 100 Н1–130 20 20 40 100 146 261 2
    DSHN-UGL-30 / 120 120 146 204
    2,360.00 $3,135.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DVA-30

    Profile for universal operated expansion joint bill DVA-30

    Usage


    Deformational profile DVA-30 (Dilatation device Dva-30 Aqua-barrier) is used for the construction of expansion joints on highly stressed surfaces (the deformation seam withstands a pressure of 22 MPa, which allows it to be used for joints at military ranges, as well as for warehouses with loaders on steel wheels and other rooms with extremely high loads). Also, using the deformation profiles, the DWA allows to ensure the unstressed passage of wheeled vehicles.


    Deformation profile Compensator Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C 22
    DVA–30 / 050 ВА1–110 15 15 40 50 118 232

     

    4,155.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill DVS-11

    Profile for universal operated expansion joint bill DVS-11

    Usage:  


    Deformational profile DVS-11 – the most durable profile among the produced not only in Russia, but in general. It is able to withstand almost any load that can create the strength of the deformation profile of 200 MPa, vertical displacement up to 2 mm, is designed for the construction of heavy equipment parking on caterpillar tracks. The deformation joint is fully sealed. Installation mortise for the finish coating thickness of 11 mm.


    Deformation profile Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift A B C
    DVS-11 / 065 (B=240) 20 20 2 20-65 240 240 200
    DVS-11 / 065 (B=280) 20 20 2 20-65 280 280 200
    4,000.00 $6,800.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint bill of FAS-DSHKA

    Profile for universal operated expansion joint bill of FAS-DSHKA

    Usage:


    Deformation profile of DSHKA-FAS (Dilatation device Aquastop DSHKA-FAS-UGL) is used for the construction of facade deformation seams (from other seams it is distinguished by another type of aluminum bars, and also by mounting method). At the device of a deformation facade seam withstands significant loads (0.30 MPa).


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression, mm Stretching, mm Shift, mm А B=C
    DSHKA-FAS/070 КЗ-064 30 75 15 70 70 0,3
    DSHKA-FAS/080 КЗ-074 40 80 20 80 80 0,3
    DSHKA-FAS/100 КЗ-094 45 80 25 100 100 0,3
    1,345.00 $1,400.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DPSH-30 (DPSH-UGL-30)

    Profile for universal operated expansion joint mortgage DPSH-30 (DPSH-UGL-30)

    Usage:


    Deformational profile of DPSH (Dilatation device Aquastop DPSh) – designed for the construction of expansion joints in conjunction with PVC waterproofing membranes on flat roofs, bridges, underground and above ground parking lots and other structures where full waterproofing of the coating in conjunction with the deformation seam is required. Deformation profile DPHS withstands high loads. in t.ch. cargo motor transport on pneumatic tires with a carrying capacity of up to 40 tons, as well as any types of loaders, roaches, etc.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В С
    DPSH-30 / 050 P1–102 5 30 30 50 105 212 3
    DPSH-UGL-30 / 050 P2–076 5 30 30 50 78 130 3
    3,230.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DPSH-50 (DPSH-UGL-50)

    Profile for universal operated expansion joint mortgage DPSH-50 (DPSH-UGL-50)

    Usage:


    Deformation profile DPSH-50 (DPSh-50-UGL). (DPSh-50-UGL)) – designed for the construction of expansion joints in conjunction with waterproof PVC-membranes on flat roofs, bridges, underground and above-ground parking lots and other structures where full waterproofing of the coating is required in conjugation with a deformation seam. Deformation profile DPHS withstands high loads. in t.ch. cargo motor transport on pneumatic tires with a carrying capacity of up to 40 tons, as well as any types of loaders, roaches, etc.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В С
    DPSH–50 / 050 П1–102 5 30 30 50 105 212 3
    DPSH–50–UGL / 050 П2–076 5 30 30 50 78 130 3
    3,800.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.-T-30 (DSHA.-T-30)

    Profile for universal operated expansion joint mortgage DSHA.-T-30 (DSHA.-T-30)

    Usage:


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.Т–30 / 085 А.Т1–075 10 10 15 85 83/195 0,7
    DSHA.Т–30–UGL / 085 83/139

     

    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.-T-50 (DSHA.-T-50)

    Profile for universal operated expansion joint mortgage DSHA.-T-50 (DSHA.-T-50)

    Usage:


    Deformation profile DZHA.-T-50 (DZHA.-T-50) (Dilatation device Akvastop / Akvabarer DZHA.-T-50 (DZHA.-T-50 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. from 30 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Сжатие Растяжение Сдвиг А В/С
    DSHA.Т–50 / 055 А.Т1–075 10 10 15 85

    70

    83/195 0,7
    DSHA.Т–50–UGL / 070 83/139
    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.-T-70 (DSHA.-T-70)

    Profile for universal operated expansion joint mortgage DSHA.-T-70 (DSHA.-T-70)

    Usage:


    Deformation profile DZHA.-T-70 (DSCA.-T-70) (Dilatation device Aquastop / Aqua Barrier DSCA.-T-70 (DZHA.-T-70 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo transport with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint from 55 to 70 mm, it is also possible to produce this deformation profile in the angular version. coating thickness of 70 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.Т–70 / 055 А.Т1–075 10 10 15 55

    70

    83/195 0,7
    DSHA.Т–70–UGL / 070 83/139
    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.TS 100 (DSHA.T UHL-100)

    Profile for universal operated expansion joint mortgage DSHA.TS 100 (DSHA.T UHL-100)

    Usage:


    The deformation profile of DSHA.TS-100 (Dilatation device AQUASTOP DSHA.TS-100-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 100 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.TS-100 А.ТС1–235 50 50 28 210

    230

    243/357 0,9
    DSHA.TS-100-UGL / 230 245/302
    DSHA.TS-100 / 250 А.ТС1–275 50 50 34 250

    270

    283/397 0,5
    DSHA.TS-100-UGL / 270 285/342
    DSHA.TS-100 / 300 А.ТС1–325 50 50 40 300

    320

    333/347 0,3
    DSHA.TS-100-UGL / 320 335/392

     

    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.TS-30 (DSHA.TS-UGL-30).

    Profile for universal operated expansion joint mortgage DSHA.TS-30 (DSHA.TS-UGL-30).

    Usage:


    The deformation profile of DZHA.TS-30 (Dilatation device AQUASTOP DASHA.TS-30-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.TS–30 / 210 А.ТS1–235 50 50 28 210

    230

    243/357 0,9
    DSHA.TS-UGL-30 / 230 245/302
    DSHA.TS–30 / 250 А.ТS1–275 50 50 34 250

    270

    283/397 0,5
    DSHA.TS-UGL-30 / 270 285/342
    DSHA.TS–30 / 300 А.ТS1–325 50 50 40 300

    320

    333/347 0,3
    DSHA.TS-UGL-30 / 320 335/392

     

     

    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.TS-50 (DSHA.T-UGL-50)

    Profile for universal operated expansion joint mortgage DSHA.TS-50 (DSHA.T-UGL-50)

    Usage:


    Deformation profile DSCA.TS-50 (Dilatation device AQUASTOP DASHA.TS-50-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.TS–50 / 210 А.ТS1–235 50 50 28 210

    230

    243/357 0,9
    DSHA.TS-UGL-50 / 230 245/302
    DSHA.TS–50 / 250 А.ТS1–275 50 50 34 250

    270

    283/397 0,5
    DSHA.T-UGL-50 / 270 285/342
    DSHA.TS–50 / 300 А.ТS1–325 50 50 40 300

    320

    333/347 0,3
    DSHA.T-UGL-50 / 320 335/392

     

    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHA.TS-70 (DSHA.T-UGL-70)

    Profile for universal operated expansion joint mortgage DSHA.TS-70 (DSHA.T-UGL-70)

    Usage:


    Deformation profile DSHA.TS-70 (Dilatation device AQUASTOP DSHA.TS-70-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 70 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA.TS-70 / 210 А.ТС1–235 50 50 28 210

    230

    243/357 0,9
    DSHA.TS-70-UGL / 230 245/302
    DSHA.TS-70 / 250 А.ТС1–275 50 50 34 250

    270

    283/397 0,5
    DSHA.TS-70-UGL / 270 285/342
    DSHA.TS-70 / 300 А.ТС1–325 50 50 40 300

    320

    333/347 0,3
    DSHA.TS-70-UGL / 320 335/392

     

    Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHKA-75 (DSHKA-UGL-75)

    Profile for universal operated expansion joint mortgage DSHKA-75 (DSHKA-UGL-75)

    Usage:


    Deformation profile DSHKA-75 (Dilatation device Aquastop DSHKA-75-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (with the exception of forklifts on cast-iron and tire tires). The compensator is made of thermoplastic elastomer (TEP). Installation DSHKA-75 is carried out by a mortar way under a finish covering with the general thickness from 75 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression, mm Stretching, mm Shift, mm А B/C
    DSHKA-75/020 КЗ-044 15 35 10 20 50/165 0.90
    DSHKA-UGL-75/040 40 55/112
    DSHKA-75/030 КЗ-054 20 45 12 30 60/1750 0.90
    DSHKA-UGL-75/050 50 65/122
    DSHKA-75/040 КЗ-064 30 75 15 40 70/185 0.90
    DSHKA-UGL-75/060 60 75/132
    DSHKA-75/050 КЗ-074 40 80 20 50 80/195 0.90
    DSHKA-UGL-75/070 70 80/142
    DSHKA-75/070 КЗ-094 45 80 25 70 100/215 0.70
    DSHKA-UGL-75/090 90 105/162
    2,390.00 $2,610.00 $ Price per running meter
  • You've just added this product to the cart:

    Profile for universal operated expansion joint mortgage DSHN-50 (DSHN-UGL-50)

    Profile for universal operated expansion joint mortgage DSHN-50 (DSHN-UGL-50)

    Usage:


    The deformation profile of DShN-50 / DShN-50-UGL (Dilatation device Akvastop DShN-50 / DShN-50-UGL) is used to seal expansion joints on surfaces with a high degree of operation (maximum load of 3.0 MPa), withstands any type of motor vehicle, including including load-carrying capacity up to 40 tons, as well as any kinds of loaders. The compensator is made of EPDM rubber, resistant to ultraviolet radiation and also to high and low operating temperatures, while still protecting the ingress of moisture and dust into the sealed space. Installation ДШН-50 – mortgage, is mounted under the finish coat with a thickness of up to 50 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В С
    DSHN-50 / 040 Н1–067 7 13 8 40 84 199 3
    DSHN-UGL-50 / 060 60 84 142
    DSHN-50 / 070 Н1–098 25 15 30 70 115 230 2,5
    DSHN-UGL-50 / 090 90 115 173
    DSHN-50 / 100 Н1–130 20 20 40 100 146 261 2
    DSHN-UGL-50 / 120 120 146 204
    3,025.00 $3,805.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for a universal expansion joint is exploited by the DSHA-50 mortgage (DSHA-50 UGL)

    The profile for a universal expansion joint is exploited by the DSHA-50 mortgage (DSHA-50 UGL)

    Usage:


    The deformation profile DSHA-50 (DSHA UHL-50) (dilatation device Aquastop / Akvabarer DSHA-50 (DSHA UHL-50) – the device is designed for expansion joints in areas of high pedestrian operational load (malls, shops, etc.) compensator is made of profiled aluminum durable width large enough expansion joint 25 (maximum Sustained load 0.35 MPa) to 195 mm (minimum Carrying force of 0.03 MPa), depending on the modification, also possible to produce this deformation profile in the angular Installation of profile DZHA-50 – mortgage, mounted in front of the finish coat, with a total thickness of 50 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA–50 / 025 А1–030 5 5 6 25

    38

    50/165 0,35
    DSHA–50–UGL / 038 50/108
    DSHA–50 / 055 А1–050 15 14 10 55

    68

    80/195 0,25
    DSHA–50–UGL / 068 80/138
    DSHA–50 / 085 А1–070 22 30 13 75

    98

    110/225 0,1
    DSHA–50–UGL / 098 110/168
    DSHA–50 / 110 А2–130 13 26 20 110

    125

    135/250 0,05
    DSHA–50–UGL / 125 135/195
    DSHA–50 / 150 А2–170 30 26 25 150

    165

    175/290 0,05
    DSHA–50–UGL / 165 175/235
    DSHA–50 / 180 А2–200 30 26 30 180

    195

    205/320 0,03
    DSHA–50–UGL / 195 205/265

     

    1,845.00 $3,330.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal joint operated DSHA.T-UGL.2

    The profile for the expansion joint is a universal joint operated DSHA.T-UGL.2

    Usage:


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHA.T-UGL.2 А.Т1–075 10 10 15 85 85 5
    Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal joint operated DSHB-50 (ДSHV-50 UGL)

    The profile for the expansion joint is a universal joint operated DSHB-50 (ДSHV-50 UGL)

    Usage:


    Deformation profile ДШВ-50 (ДШВ-50 УГЛ) (Dilatation device Akvastop / Akvabarer ДШВ-50 (ДШВ-50 УГЛ) – is developed for the device of deformation joints in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum load capacity of 0.15 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.The installation of the profile of the DSHV is a mortgage, it is installed under the space of a tile adhesive with a total thickness of 50 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHV-50/025                                             DSHV-50-UGL / 030 В0–032 2 2 3 25

    30

    35/125

    35/80

    0,15
    В1–032 5 5 3
    В2–032 1 2 3
    DSHV-50/030                                                DSHV-50-UGL / 035 В0–038 5 5 4 30

    35

    40/130

    40/85

    0,15
    В1–038 6 6 4
    В2–038 2 2 4
    DSHV-50 / 040                                          DSHV-50-UGL / 045 В0–049 9 9 6 40

    45

    50/140

    50/95

    0,10
    В1–049 10 10 6
    В2–049 2 3 6
    DSHV-50 /050                                                DSHV-50-UGL / 055 В0–060 12 12 8 50

    55

    60/150

    60/105

    0,1
    В1–060 15 15 8
    В2–060 3 3 8
    DSHV-50 / 060 В0–068 14 14 10 60

    65

    65/160

    65/115

    0,05
    DSHV-50-UGL / 065
    985.00 $1,440.00 $ Розничная цена за погонный метр
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal joint operated DSHV-20 (DSHV-20 UGL)

    The profile for the expansion joint is a universal joint operated DSHV-20 (DSHV-20 UGL)

    Usage:


    Deformation profile ДШВ-20 (ДШВ-20 УГЛ) (Dilatation device Akvastop / Akvabarer ДШВ-20 (ДШВ-20 УГЛ) – it is developed for the device of deformation joints in zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.The installation of the profile of the DSHV is a mortgage, it is installed under the space of a tile adhesive with a total thickness of 20 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHV-20/025                                            DSHV-20-UGL / 030 В0–032 2 2 3 25

    30

    35/125

    35/80

    0,2
    В1–032 5 5 3
    В2–032 1 2 3
    DSHV-20/030                                                 DSHV-20-UGL / 035 В0–038 5 5 4 30

    35

    40/130

    40/85

    0,18
    В1–038 6 6 4
    В2–038 2 2 4
    DSHV-20 / 040                                           DSHV-20-UGL / 045 В0–049 9 9 6 40

    45

    50/140

    50/95

    0,14
    В1–049 10 10 6
    В2–049 2 3 6
    DSHV-20 /050                                                DSHV-20-UGL / 055 В0–060 12 12 8 50

    55

    60/150

    60/105

    0,1
    В1–060 15 15 8
    В2–060 3 3 8
    DSHV-20 / 060 В0–068 14 14 10 60

    65

    65/160

    65/115

    0,05
    DSHV-20-UGL / 065
    785.00 $1,055.00 $ Розничная цена за погонный метр
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal joint-operated DZHL-50 (Dshl-50 UGL)

    The profile for the expansion joint is a universal joint-operated DZHL-50 (Dshl-50 UGL)

    Usage:


    Deformational profile Dshl-50 (Dshl-50 UGL) (Dilatation device Akvastop / Akvabarer Dshl-50 (Dshl-50 UGL) – designed for the construction of expansion joints with a high floor design (from 50 mm), deformation profile of the LSL according to the declared load (0.05 MPa) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 15 to 35 mm depending on the modification, of the given deformation profile in the angular modification.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B/С
    DSHL-15/005  L1–017 2 4 10 15 20/110 0.05
    DSHL-15-UGL/015 20/65
    DSHL-15/010 L1–021 3 40 20 25 25/115 0.05
    DSHL-15-UGL/ 2025/70 25/70
    DSHL-15/015 L1–027 5 4 15 30 30/120 0.03
    DSHL-15-UGL/ 025 30/75
    DSHL-15/025 L1–037 15 5 20 40 40/130
    DSHL-15-UGL/ 035 40/85

     

    730.00 $770.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal operated bill DSHKA-30 (DSHKA-30-UGL)

    The profile for the expansion joint is a universal operated bill DSHKA-30 (DSHKA-30-UGL)

    Usage:


    Deformation profile DShKA-30 (Dilatation device Aquastop DShKA-30-UGL) is used for the device of highly exploited expansion joints, including coping with loads produced by any vehicles and loaders (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DZHA-30 is carried out by a mortar method for the final coating with a total thickness of 30 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression, mm Stretching, mm Shift, mm А B/C
    DSHKA-30/020 КЗ-044 15 35 10 20 50/165 1.20
    DSHKA-30-UGL/040 40 55/112
    DSHKA-30/030 КЗ-054 20 45 12 30 60/175 1.20
    DSHKA-30-UGL/050 50 65/122
    DSHKA-30/040 КЗ-064 30 75 15 40 70/185 1.20
    DSHKA-30-UGL/060 60 75/132
    DSHKA-30/050 КЗ-074 40 80 20 50 80/195 1.20
    DSHKA-30-UGL/070 70 80/142
    DSHKA-30/070 КЗ-094 45 80 25 70 100/215 0.90
    DSHKA-30-UGL/090 90 105/162

     

    1,610.00 $1,830.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal operated bill DSHV-0 (DSLL-0 UGL)

    The profile for the expansion joint is a universal operated bill DSHV-0 (DSLL-0 UGL)

    Usage:


    Deformation profile DSHV-0 (DSHV-0 UGL) (Dilatation device Akvastop / Akvabarer DSHV-0 (DSHV-0 UGL) – it is developed for the device of deformation seams in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels .The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 35 to 70 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHV-0 / 035                                            DSHV-0-UGL / 035 В0–032 2 2 3 35 110           72 0,2
    В1–032 5 5 3
    В2–032 1 2 3
    DSHV-0 / 040                                                DSHV-0-UGL / 040 В0–038 5 5 4 40 115           77 0,18
    В1–038 6 6 4
    В2–038 2 2 4
    DSHV-0 / 050                                            DSHV-0-UGL / 050 В0–049 9 9 6 50 125          87 0,14
    В1–049 10 10 6
    В2–049 2 3 6
    DSHV-0 / 060                                                DSHV-0-UGL / 060 В0–060 12 12 8 60 135           97 0,1
    В1–060 15 15 8
    В2–060 3 3 8
    DSHV-0 / 070 В0–068 14 14 10 70 145         107 0,06
    DSHV-0-UGL / 070

     

    615.00 $895.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal operated bill DSV-15 (DShV-15 UGL)

    The profile for the expansion joint is a universal operated bill DSV-15 (DShV-15 UGL)

    Usage:


    Deformation profile DSHV-15 (DSHV-15 UGL) (Dilatation device Aquastop / Aquabarrier DSHV-15 (DSHV-15 UGL) – is developed for the device of deformation joints in the zones of the increased pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the profile of the DSHV – a mortgage, is mounted under the space of the tile adhesive.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHV-15 / 035                                             DSHV-15-UGL / 035 В0–032 2 2 3 25

    30

    35/125

    35/80

    0,2
    В1–032 5 5 3
    В2–032 1 2 3
    DSHV-15 / 040                                                DSHV-15-UGL / 040 В0–038 5 5 4 30

    35

    40/130

    40/85

    0,18
    В1–038 6 6 4
    В2–038 2 2 4
    DSHV-15 / 050                                            DSHV-15-UGL / 050 В0–049 9 9 6 40

    45

    50/140

    50/95

    0,14
    В1–049 10 10 6
    В2–049 2 3 6
    DSHV-15 / 060                                                DSHV-15-UGL / 060 В0–060 12 12 8 50

    55

    60/150

    60/105

    0,1
    В1–060 15 15 8
    В2–060 3 3 8
    DSHV-15 / 070 В0–068 14 14 10 60

    65

    65/160

    65/115

    0,06
    DSHV-15-UGL / 070
    690.00 $955.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal operated bill of lading DSHA-0 (DSHA-0 UGL)

    The profile for the expansion joint is a universal operated bill of lading DSHA-0 (DSHA-0 UGL)

    Usage:


    Deformation profile DZHA-0 (DZHA-0 UGL) (Dila-Akvastop / Akvabarer DSCA-0 (DZHA-0 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformation joint to be adjusted from 50 to 205 mm depending on the modification, it is also possible to produce this deformation profile in the angular version. cover.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHA–0 / 050 А1–030 5 5 6 50 220 0,35
    DSHA–0–UGL / 050 135
    DSHA–0 / 080 А1–050 15 14 10 80 250 0,25
    DSHA–0–UGL / 080 165
    DSHA–0 / 110 А1–070 22 30 13 110 280 0,1
    DSHA–0–UGL / 110 195
    DSHA–0 / 135 А2–130 13 26 20 135 305 0,05
    DSHA–0–UGL / 135 220
    DSHA–0 / 175 А2–170 30 26 25 175 345 0,05
    DSHA–0–UGL / 175 260
    DSHA–0 / 205 А2–200 30 26 30 205 375 0,03
    DSHA–0–UGL / 205 290

     

    1,800.00 $3,280.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal operated consignment note DSHL-0 (DSHL-0 UGL)

    The profile for the expansion joint is a universal operated consignment note DSHL-0 (DSHL-0 UGL)

    Usage:


    Deformational profile of DZHL-0 / Dschl-0 UGL (Dilatation device Akvastop / Akvabarer Dshl-0 / Dschl-0 UGL) – designed for sealing deformation seams for finishing the floor, walls and ceilings, deformation profile of the LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP), the width of the expansion joint is from 20 to 40 mm, depending on the modification, it is also possible to release this deformation profile in the angular modification.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B=C
    DSHL-0/020  L1–017 2 4 10 20 120 0.05
    DSHL-0-UGL / 020 70
    DSHL-0/025 L1–021 3 40 20 25 125 0.05
    DSHL-0-UGL / 025 75
    DSHL-0/030 L1–027 5 4 15 30 130 0.05
    DSHL-0-UGL / 030 80
    DSHL-0/040 L1–037 15 5 20 40 140 0.05
    DSHL-0-UGL / 040 90
    605.00 $645.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is a universal operated overhead DPV

    The profile for the expansion joint is a universal operated overhead DPV

    Usage:


    Deformative overhead profile DPV – designed specifically for the construction of expansion joints in underground public parking lots (in shopping, administrative centers, etc.). The declared maximum load of 2.1 MPa allows to withstand the loads produced by any motor vehicles at any intensity. Installation of the expansion joint with a mortar for the finish coat with a total thickness of 8 mm (no more and no less). It is possible to paint in any color according to RAL. The width of the designed expansion joint is not fixed, it can vary from 40 to 60 mm.


    Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В С
    DPV-8/050 PV1-240/050 10 30 60 40-60 240 240 2.1
    DPV-8/050 PV-88-СН 10 30 60 40-60 240 240 2.1
    2,505.00 $4,185.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the expansion joint is universal, which is operated by the DSHV-35 mortar (DSHV-35 UGL)

    The profile for the expansion joint is universal, which is operated by the DSHV-35 mortar (DSHV-35 UGL)

    Usage: 


    Deformation profile DSHV-35 (DSHV-35 УГЛ) (Dilatation device Akvastop / Akvabarer DSHV-35 (DSHV-35 UGL) – is developed for the device of deformation joints in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.), the maximum load-bearing capacity of 0.18 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the profile of the DSHV – a mortgage, is mounted under the space of tile adhesive with a total thickness of 35 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHV-35/025                                            DSHV-35-UGL / 030 В0–032 2 2 3 25

    30

    35/125

    35/80

    0,18
    В1–032 5 5 3
    В2–032 1 2 3
    DSHV-35/030                                                DSHV-35-UGL / 035 В0–038 5 5 4 30

    35

    40/130

    40/85

    0,15
    В1–038 6 6 4
    В2–038 2 2 4
    DSHV-35 / 040                                          DSHV-35-UGL / 045 В0–049 9 9 6 40

    45

    50/140

    50/95

    0,15
    В1–049 10 10 6
    В2–049 2 3 6
    DSHV-35 /050                                                DSHV-35-UGL / 055 В0–060 12 12 8 50

    55

    60/150

    60/105

    0,1
    В1–060 15 15 8
    В2–060 3 3 8
    DSHV-35 / 060 В0–068 14 14 10 60

    65

    65/160

    65/115

    0,05
    DSHV-35-UGL / 065
    870.00 $1,140.00 $ Розничная цена за погонный метр
  • You've just added this product to the cart:

    The profile for the universal expansion joint is exploited by the DSHA-15 mortar (DSHA-15 UGL)

    The profile for the universal expansion joint is exploited by the DSHA-15 mortar (DSHA-15 UGL)

    Usage:


    Distortion profile DZHA-15 (DZHA-15 UGL) (Dilatation device AQUASTOP / AquaBarrier DZHA-15 (DZHA-15 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (maximum withheld load of 0.35 MPa) to 205 (the minimum withstand load 0.25 MPa) mm depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-15 – mortgage, mounted in front of the finish coat, with a total thickness of 15 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В=С
    DSHA–15 / 025 А1–030 5 5 6 50 220 0,35
    DSHA–15–UGL / 038 135
    DSHA–15 / 055 А1–050 15 14 10 80 250 0,25
    DSHA–15–UGL / 068 165
    DSHA–15 / 085 А1–070 22 30 13 110 280 0,1
    DSHA–15–UGL / 098 195
    DSHA–15 / 110 А2–130 13 26 20 135 305 0,05
    DSHA–15–UGL / 125 220
    DSHA–15 / 150 А2–170 30 26 25 175 345 0,05
    DSHA–15–UGL / 165 260
    DSHA–15 / 180 А2–200 30 26 30 205 375 0,03
    DSHA–15–UGL / 195 290
    1,360.00 $2,840.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the universal expansion joint is exploited by the DSHA-75 mortgage (DSHA-75 UGL)

    The profile for the universal expansion joint is exploited by the DSHA-75 mortgage (DSHA-75 UGL)

    Usage:


    Deformation profile DZHA-75 (DZHA-75 UGL) (Dila-75 dilatation device AquaStop / Aquabarrier DZHA-75 (DZHA-75 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (the maximum withstand load is 0.35 MPa) to 195 mm (the minimum withheld load is 0.03 MPa) depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-75 – mortgage, mounted in front of the finish coat, with a total thickness of 75 mm.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHA–75 / 025 А1–030 5 5 6 25

    38

    50/165 0,35
    DSHA–75–UGL / 038 50/108
    DSHA–75 / 055 А1–050 15 14 10 55

    68

    80/195 0,25
    DSHA–75–UGL / 068 80/138
    DSHA–75 / 085 А1–070 22 30 13 75

    98

    110/225 0,1
    DSHA–75–UGL / 098 110/168
    DSHA–75 / 110 А2–130 13 26 20 110

    125

    135/250 0,05
    DSHA–75–UGL / 125 135/195
    DSHA–75 / 150 А2–170 30 26 25 150

    165

    175/290 0,05
    DSHA–75–UGL / 165 175/235
    DSHA–75 / 180 А2–200 30 26 30 180

    195

    205/320 0,03
    DSHA–75–UGL / 195 205/265
    2,255.00 $3,740.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the universal expansion joint is exploited by the Dshl-30 mortar (DSHL-30 UGL)

    The profile for the universal expansion joint is exploited by the Dshl-30 mortar (DSHL-30 UGL)

    Usage:


    Deformational profile of Dschl-30 / Dschl-30 UGL (Dilatation device Akvastop / Akvabarer Dshl-30 / Dschl-30 UGL) – designed for the device of expansion joints with high floor construction (from 30 mm), deformational profile of LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 5 to 35 mm depending on the modification, it is also possible to release this deformation profile in the angular modification.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B/С
    DSHL-15/005  Л1–017 2 4 10 15 20/110 0.05
    DSHL-15-UGL/015 20/65
    DSHL-15/010  Л1–021 3 40 20 25 25/115 0.05
    DSHL-15-UGL/ 2025/70 25/70
    DSHL-15/015 Л1–027 5 4 15 30 30/120 0.03
    DSHL-15-UGL/ 025 30/75
    DSHL-15/025 Л1–037 15 5 20 40 40/130
    DSHL-15-UGL/ 035 40/85

     

    635.00 $675.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the universal expansion joint is maintained by the DSHV-0 mortgage (DSHV-0 UGL)

    The profile for the universal expansion joint is maintained by the DSHV-0 mortgage (DSHV-0 UGL)

    Usage


    Deformation profile of DSCH-0 (DSCH-0 UGL) (Dilatation device AQUASTOP / AQUABARER D-SHO-0 (DZHV-0 UGL) – designed for the construction of expansion joints in areas with increased pedestrian operational load (shopping centers, shops, etc.) The expansion joint is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 25 to 65 mm depending on the modification, it is also possible to release the deformed seams insulating profile angularly by mounting profile DSHO-0 -. invoice, mounted directly on the final coating.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHO-0/035                                       DSHO–0–UGL / 035 В0–032 2 2 3 25

    30

    35/125

    35/80

    0,15
    В1–032 5 5 3
    В2–032 1 2 3
    DSHO-0/040                                    DSHO–0–UGL / 040 В0–038 5 5 4 30

    35

    40/130

    40/85

    0,15
    В1–038 6 6 4
    В2–038 2 2 4
    DSHO-0/050                              DSHO–0–UGL / 050 В0–049 9 9 6 40

    45

    50/140

    50/95

    0,10
    В1–049 10 10 6
    В2–049 2 3 6
    DSHO-0/060                                    DSHO–0–UGL / 060 В0–060 12 12 8 50

    55

    60/150

    60/105

    0,1
    В1–060 15 15 8
    В2–060 3 3 8
    DSHO-0/070 В0–068 14 14 10 60

    65

    65/160

    65/115

    0,05
    DSHO–0–UGL / 070

     

    775.00 $1,075.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the universal expansion joint is operated by the DSHO-24 mortar (DSHO-24 UGL)

    The profile for the universal expansion joint is operated by the DSHO-24 mortar (DSHO-24 UGL)

    Usage:


    Deformation profile of DCHO-24 (DSPO-24 UGL) (Dilatation device AQUASTOP / AQUABARER DOSHO-24 (DSSO-24 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) In contrast to the expansion joints of the Dosho series, it is also designed for the movement of light vehicles of low intensity.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 25 to 65 mm depending on the modification, mation profile in the angular performance Installation Profile DSHO-24 -. the mortgage, is mounted in the adhesive base for the tiles of at least 24 mm in height.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А В/С
    DSHO-24/030                                   DSHO–24–UGL / 030 В0–032 2 2 3 30 35/156

    35/95

    0,25
    В1–032 5 5 3
    В2–032 1 2 3
    DSHO-24/040                                  DSHO–24–UGL / 040 В0–038 5 5 4 30

    35

    44/161

    44/100

    0,25
    В1–038 6 6 4
    В2–038 2 2 4
    DSHO-24/050                              DSHO–24–UGL / 050 В0–049 9 9 6 40

    45

    54/171

    54/110

    0,20
    В1–049 10 10 6
    В2–049 2 3 6
    DSHO-24/060                                  DSHO–24–UGL / 060 В0–060 12 12 8 50

    55

    64/181

    64/120

    0,20
    В1–060 15 15 8
    В2–060 3 3 8
    DSHO-24/070 В0–068 14 14 10 60

    65

    74/191

    74/130

    0,15
    DSHO–24–UGL / 070

     

    775.00 $1,045.00 $ Price per running meter
  • You've just added this product to the cart:

    The profile for the universal joint deformed joint Dshl-15 (Dshl-15 UGL)

    The profile for the universal joint deformed joint Dshl-15 (Dshl-15 UGL)

    Usage: 


    Deformational profile of DZHL-0 / Dschl-0 UGL (Dilatation device Akvastop / Akvabarer Dshl-0 / Dschl-0 UGL) – designed for sealing deformation seams for finishing the floor, walls and ceilings, deformation profile of the LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP), the width of the expansion joint is from 20 to 40 mm, depending on the modification, it is also possible to release this deformation profile in the angular modification.


    Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa
    Compression Stretching Shift А B=C
    DSHL-15/005  Л1–017 2 4 10 20 120 0.05
    DSHL-15-UGL/015 70
    DSHL-15/010  Л1–021 3 40 20 25 125 0.05
    DSHL-15-UGL / 20 75
    DSHL-15/015 Л1–027 5 4 15 30 130 0.03
    DSHL-15-UGL / 025 80
    DSHL-15/025 Л1–037 15 5 20 40 140
    DSHL-15-UGL / 035 90

     

    530.00 $570.00 $ Price per running meter

Profiles for expansion joints

 

Profiles for the device of expansion joints - as a rule are two aluminum bars with a plastic tape between them, assembled together. Aluminum bars are attached to both sides of the expansion joint, the tape serves as an expansion joint compensator.

How to choose a strain joint for floors and walls?

There are a large number of different models for expansion joints to choose the right one, you need:

  • Calculate the width of the expansion joint
  • Calculate the estimated maximum loads
  • Determine the type of installation (mortgage or delivery note)
  • Determine whether there is a need for a complete sealing of the expansion joint
  • Based on these data, you can set the type of deformation profile you need. The width of the deformed joint can vary from 3 to 500 mm, but the wider the seam, the less load it can withstand.

Types of deformation profiles by installation method

Profiles for expansion joints can be of three types:

  • Overhead - mounted over the finish coat, aluminum profiles are attached to the base on a special anchor, the pluses of such seams can be attributed to the lack of the need for stitching the seam, the minus sign is "the bulging part of the aluminum profiles over the finish coat for 3-10 mm, depending on the profile.
  • Mortgaging - embedded deformation profiles are mounted under the finish coat with a thickness of 2 to 60 mm depending on the type of profile, the deformed seams are made qualitative, however, it is necessary to accurately shtroblenie and the application of the finish coating over the seam.
  • Plug-in - most often facade (unexploited) expansion joints, the slats in such seams are inserted into the seam, then fixed in pre-drilled holes with special anchors.
  • Decorative - perfectly suited for domestic premises, mounted with a clip built into the seam without the use of tools. The disadvantages of such seams are the impossibility of their application in commercial and industrial premises even with low loads

Types of expansion joints according to the material of the compensator

When choosing the expansion joint, also pay attention to a variety of compensators and the type of raw materials from which they are produced, there are several types of expansion joints:

  • EPDM - compensators - resistant to chemical environments, mechanical damage, and also have maximum plasticity and the ability to elastic deformation at high dynamic loads. It is also important to note that expansion joints with EPDM rubber expansion joints are more leak tight than expansion joints made of other materials
  • TIC - compensators - rigid expansion joints made of thermoplastic elastomer with low plasticity, suitable for most projects.
  • PVC expansion joints - medium-strength compensators of gray color, as well as TEPs are suitable for most premises.
    Compensators from aluminum (solid strain joints) - are used for the construction of highly loaded building structures, in addition

Types of strain joints by load:

  • According to the classification developed by the company Aquabarrier, the following types of deformation profiles are available for the type of load:
  • Without loads (decorative deformation seams) - are used for the device of household seams, or in places where operation is not provided.
  • Pedestrian loads (0.03 MPa) - Such expansion joints can withstand small stable pedestrian loads, including in commercial premises
  • Trading cents (0.1 MPa) - deformation profiles corresponding to this load can withstand loads, when shopping malls and other rooms with high pedestrian traffic
  • Lego cars (0.3 MPa) - profile from this category can withstand passenger transport on pneumatic tires
  • Freight cars (0.7 MPa) - profiles withstanding loads creating cargo vehicles
  • Transport on all-metal wheels (22+ MPa) - the deformation profiles not only withstand loads, but also ensure the unstressed passage of vehicles on all-metal wheels.
    The strength of the expansion joints determines the profile, size and type of material from which the compensator was made,