The claimed characteristics of the materials sold by us may differ only for the better
The method “Wall in the Soil”
The construction using the “Wall in the Grunt” method involves the use of high-quality waterproofing materials (which are presented in our assortment with waterproofing materials of the Technoelast series, as well as PVC and EPDM non-reinforced membranes). In order to protect the waterproofing from backfilling, we offer strong profiled membranes of German manufacturers IsoDrain and Delta Dorken, for waterproofing technological and formwork seams – hydrostars of the series SVG produced by Aquabarrier. We recommend using thermally bonded geo-textiles Typar SF56 as the separating layer.
Geotextile non-woven needle-punched 450
Usage: “The wall in the ground”, Base of the roadway, Concrete preparation, Construction of motorways, Deep drainage, Landfills, Parking lots with heavy equipment, Recycling, Reinforcement of asphalt concrete, Reinforcing the roadbed, Reservoir, Road construction, Under the foundation, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 500
Usage: “The wall in the ground”, Concrete preparation, Construction of motorways, Deep drainage, Green roofs, Landfills, Parking lots with heavy equipment, Protection of waterproofing foundations, Railways, Reinforcement of asphalt concrete, Reinforcing the roadbed, Road construction, Under the foundation, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 550
Usage: “The wall in the ground”, Airport, Concrete preparation, Construction of motorways, Deep drainage, Protection of waterproofing foundations, Railways, Stylobates loaded, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Profiled geomembrane 8 mm Planter Standart 250 kN / m²
Usage: “The wall in the ground”, Concrete preparation, Garden paths, Parking of cars, Protection of waterproofing foundations, Scaffolding, The device of drainage systems, Under the foundation
- Planter Standard – profiled membrane of the popular domestic manufacturer TekhnoNIKOL, 100% consists of secondary raw materials, due to which it has a relatively low price.
- Strength of the element with a geometrical deformation of not more than 10%: 250 kN / m²
PVC Geomembrane Logicbase V-SR (Logicroof T-SL) 1.5 / 2.0 mm
Usage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
PVC Geomembrane Plastfoil U 2.0 mm Penoplex
Usage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
- Plastfoil U 2.0 (GEO) is a non-reinforced PVC membrane with a thickness of 2 mm (a thickness of 1.5 mm is possible), used for waterproofing various underground structures.
Waterbar SVG-120 (EPDM)
Usage: “The wall in the ground”, Sealing of technological seams in the formwork
Hydrostick SVG-120 hydrostatic formwork inner, designed specifically for sealing technological seams concreting enclosing structures and various underground structures using the “Wall in the ground” method. Mounted in the end shields of the formwork Bauer. 120 (mm) – total width of the hydrostar, 23.4 (mm) inner diameter.
Waterbar SVG-120 (PVC)
Usage: “The wall in the ground”, Sealing of technological seams in the formwork
Hydrostick SVG-120 hydrostatic formwork inner, designed specifically for sealing technological seams concreting enclosing structures and various underground structures using the “Wall in the ground” method. Mounted in the end shields of the formwork Bauer. 120 (mm) – total width of the hydrostar, 23.4 (mm) inner diameter.
Waterbar SVG-150 (PVC)
Usage: “The wall in the ground”, Sealing of technological seams in the formwork
Hydrostick SVG-150 hydrostatic formwork inner, designed specifically for sealing technological seams concreting enclosing structures and various underground structures using the “Wall in the ground” method. Mounted in the end shields of the Soletanch formwork. 150 (mm) – the total width of the hydrostar, 15 (mm) – the width of the process joint.
Waterbar SVG-200 (PVC)
Usage: “The wall in the ground”, Sealing of technological seams in the formwork
Hydrostick SVG-200 hydrostatic formwork inner, designed specifically for sealing technological seams concreting enclosing structures and various underground structures using the “Wall in the ground” method. Mounted in the end shields of the Soletanch formwork. 150 (mm) – the total width of the hydrostar, 15 (mm) – the width of the process joint.
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Usage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Usage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.