The claimed characteristics of the materials sold by us may differ only for the better
Geomat (Biomat)
80.00 $ Approximate middle wholesale price per square meter
- Description
- Additional information
- Questions & Answers
Description
Biomats are nonwoven two-layered webs, between which are the seeds of perennial grasses and nutrient mixtures, fastened together with a needle-punched method.
Biomat is most often used for rapid landscaping or reclamation of old damaged low-fertility soils. The assortment of biomass is quite large, as for each climatic zone individual organic mineral, soil-fertilizing bacteria, growth stimulators are selected, and individual features of the soil are also taken into account.
Biomats have also been widely used in landscape design and in the implementation of erosion control measures.
Name | Type 1 | Type2 | |
---|---|---|---|
Seed content, g / m² | 80 ± 10 % | 150 ± 10 % | |
Amount of fertilizer, g / m² | 150 ± 10 % | 200 ± 10 % | |
Surface density, g / m² | 650 | 800 | |
Breaking load, N, not less than | 25 | ||
Relative elongation at break,%, not less than | 70 | ||
Thickness at a pressure of 2 kPa, mm, not less than | 3,8 |
Roll size | ||
---|---|---|
Length, m | 20 – 25 | |
Width, m | 1,6 – 3,0 |
Additional information
Use | Agriculture, Anti-erosion, Landscaping, Soil reclamation |
---|
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
- You've just added this product to the cart:
Geotextile non-woven needle-punched 300
Read MoreБыстрый просмотрGeotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
- You've just added this product to the cart:
Geo-grating polypropylene biaxial
Read MoreБыстрый просмотрGeo-grating polypropylene biaxial
Usage: Base of the roadway, Forest and access roads, Materials for the arrangement of parking places, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Road construction, Strengthening of pavement, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation 2%
5%
along
across
along
across
along
across
along
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50 - You've just added this product to the cart:
Geotextile non-woven needle-punched 250
Read MoreБыстрый просмотрGeotextile non-woven needle-punched 250
Usage: Armorranean mounds, Artificial lawn on sports grounds, Drainage layer, Garden paths, Inversion roofs, Landscaping, Materials for the arrangement of parking places, Natural lawn on sports grounds, Reinforcement of slopes, Scaffolding, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Связанные материалы
Bentonite geomat ASL
Usage: Construction of open-cut tunnels, Drainage of retaining walls, Industrial waste dumps, Landfills, Protection against radon and methane, Replacement of deck flooring, Reservoir, Sludge dumps, Tombs of toxic and radioactive waste, Tunnel construction in a closed way
- Bentonite geomat ASL – in contrast to the standard bentonite mat AS is equipped with a fourth layer – LDPE membrane thickness from 0.2 to 0.6 mm. Used in cases with increased requirements for the environment, or for the installation of dumps of toxic and radioactive materials.
Index АС 50 АС 100 АСL 50 АСL 100 Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than3,0×10-11
3,0×10-111,5×10-11
1,5×10-110.0
3,0×10-110.0
1,5×10-11Degree of swelling, ml / 2g, not less than 24 24 24 24 Surface density of bentonite mat, kg / m2, ± 10 3.9 5.2 4.1 5.4 Tensile strength (along / across), kH / m, not less than 12/10 12/10 12/10 12/10 Adhesion strength, N / m, not less than 400 400 400 400 Resistance to hydrostatic pressure, atm, not less than 5 6 5 6 The thickness of the material at a load of 2 kPa, mm, ± 10% 6.0 6.4 6.2 6.6 - You've just added this product to the cart:
Drainage geomat without geotextile "Gidromat 1"
Read MoreБыстрый просмотрDrainage geomat without geotextile “Gidromat 1”
Usage: Anti-erosion measures, Anti-landslide measures, Antilock dykes, Deep drainage, Drainage layer, Drainage of retaining walls, Horizontal reservoir drainage, Reservoir gas discharge, The device of drainage systems, Waterproof and capillary interlayers
- Drainage geomat without geotextile bonded geotextile has one of the widest fields of application among all geosynthetic materials. The main purpose is the installation of drainage systems, but also with the help of this drainage geomath it is possible to carry out horizontal and vertical drainage systems, gas removal systems, arrangement of horizontal and vertical protective layers and much more …
Index 2D 3D 3D/M Method Thickness at load, mm, not less than -2 kPa 9 10 11 -20 kPa 8 9 10 -200 kPa 7 8 9 Breaking load, kN / m, not less than 15 20 25 Relative elongation at break,%, not more than 120 120 120 Resistance to compression, kPa 1250 1600 2000 ASTM 1621 Water throughput, l / m / s -20 kPa 1,30 1,50 1,50 ISO 12958 -200 kPa 0,95 1,20 1,20 ISO 12958 Geogrid Raw HDPE Long-term compression (1000 h, 200 kPa),% 3 3 3 ISO 12956 Filtering geotextile Geomembrane Raw Polypropylene (PP) HDPE Pore size, mm 0,08 0,08 – ISO 12956 Water permeability (vertical), l / m2s 100 100 0 ГОСТ 29104.16 Roll size Width, m 4 (2,5) Length, m 50 - You've just added this product to the cart:
Volumetric geogrid without perforation
Read MoreБыстрый просмотрVolumetric geogrid without perforation
Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ОДМ 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at – 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56
- You've just added this product to the cart:
Geomat polypropylene anti-erosion reinforced with geogrids SSNP
Read MoreБыстрый просмотрGeomat polypropylene anti-erosion reinforced with geogrids SSNP
Usage: Anti-erosion measures, Anti-landslide measures, Armorranean mounds, Drainage of retaining walls, Landscaping, Ponds and reservoirs, Protection against landslides, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Sea coast to the bay, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes
- Polypropylene and polyethylene geomats are relatively inexpensive solutions for landscape design, protecting the soil from erosion, strengthening the banks of rivers, canals, ponds and lakes. Often also used for the device of green roofs and the construction of sites with a natural plant layer.
Name The weight,
g / m²Tensile strength at longitudinal / transverse rupture, kN / m² Material Thickness, mm Standard roll sizes, mm GM 3 260 2/2 polyethylene 14-18 Width 2 м
Length 30 мGM 4 380 3/3 15-20 GMТ 300 300 1,8/1 polypropylene 5-12 Width
from 1 to 4 м
Length
from 30 to 60 мGMТ 400 400 2/1,5 9-15 GMТ 500 500 2,5/1,8 12-20 GMТ 550 550 3/2 15-25 GMТ 600 600 4/2 15-25 GMТ-К20 400 20/20 polypropylene / geo-grid of polyester 12-15 GMТ-К40 440 40/40 GMТ-К60 480 60/60 GMТ-К90 500 90/90 GMТ-К100 530 120/100 GMТ-К120 590 120/120 GMТ-К150 700 150/150 GMТ-К200 800 200/200 GMТ-Д1 450 6/5 polypropylene / geotextile 12-15 GMТ-Д2 600 8/8 GMТ-BIO 400 560 3/3 Polypropylene / geotextile with seeds of herbs 15 GMТ-BIO 500 660 4/4 – 20 - You've just added this product to the cart:
Drainage geomat with geotextile (one-side thermal bonding) "Gidromat 2"
Read MoreБыстрый просмотрDrainage geomat with geotextile (one-side thermal bonding) “Gidromat 2”
Usage: Anti-erosion measures, Anti-landslide measures, Artificial gardening, Deep drainage, Drainage layer, Drainage of retaining walls, Green roofs, Horizontal reservoir drainage, The device of drainage systems, Waterproof and capillary interlayers
- Drainage geomat by thermo-bonded nonwoven needle-punched geotextile with a surface density of at least 250 g / m2 can be effectively used in drainage systems where silt prevention is necessary. Also can be used
Index 2D 3D 3D/M Method Thickness at load, mm, not less than -2 kPa 9 10 11 -20 kPa 8 9 10 -200 kPa 7 8 9 Breaking load, kN / m, not less than 15 20 25 Relative elongation at break,%, not more than 120 120 120 Resistance to compression, kPa 1250 1600 2000 ASTM 1621 Water throughput, l / m / s -20 kPa 1,30 1,50 1,50 ISO 12958 -200 kPa 0,95 1,20 1,20 ISO 12958 Geogrid Raw HDPE Long-term compression (1000 h, 200 kPa),% 3 3 3 ISO 12956 Filtering geotextile Geomembrane Raw Polypropylene (PP) HDPE Pore size, mm 0,08 0,08 – ISO 12956 Water permeability (vertical), l / m2s 100 100 0 ГОСТ 29104.16 Roll size Width, m 4 (2,5) Length, m 50
Biomats
Biomats are three-dimensional bulk roll materials used for restoration of the vegetative layer, as well as for rapid natural gardening. Biomat is two layers of geotextile, fastened together by a woven method, between which are seeds of perennial plants.