The claimed characteristics of the materials sold by us may differ only for the better
Mastic protective polymeric aluminum №57
Price on request
- Description
- Additional information
- Questions & Answers
Description
Mastic protective aluminum Tehnonikol No. 57 consists of petroleum bitumen, polymer-modified, technological additives, pigment and organic cracker. The main functionality of Mastic No. 57 is to protect the substrate from UV radiation, as well as from excessive heating (thanks to aluminum pigmentation), and the mastic is used to protect metal roofs from corrosion.
Regulations for the use of Tekhnonikol aluminum mastic No. 57 include the design of a protective reflective layer on mastic roofs, as well as the restoration of old protective layers on mastic bituminous and bitumen-polymer roofs.
Additional information
| Strength of adhesion to concrete, MPa | 0.3 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.36 |
| Strength of adhesion between roll materials, MPa | 0.2 |
| Прочность сцепления рулонный материал-бетон, МПа | 0.2 |
| Shear strength of adhesive joint, kN / m | – |
| Conditional strength, MPa | 0.2 |
| Relative elongation at break,% | 200 |
| Water absorption for 24 hours, by weight | – |
| Массовая доля нелетучих веществ, % | 50 |
| Heat resistance, С | +100 |
| Temperature of flexibility on the bar, C | -15 |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
-
You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreQuick viewWelding waterproofing material Technoelast EPP + 100 / -25 5.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Read MoreQuick viewWeldable waterproofing material Technoelast HPP + 100 / -25 4.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Read MoreQuick viewWeldable waterproofing material Technoelast Alpha EPP -20 / + 100
Price on requestUsage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
-
You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreQuick viewSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Price on requestUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreQuick viewWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
Price on requestUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
Связанные материалы
-
Bitumen-polymer hermetic №42 (BP)
Price on requestUsage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bitumen-polymer sealant Technonikol No. 42 is a one-component material consisting of oil bitumen, modified with rubber and technological additives. Available in three versions, depending on climatic zones: BP-G25, BP-G35, BP-G50. A sealant is used in road construction to seal expansion joints in highways, runways of aerodromes and highways.
The name of indicators Unit. measurements Value Test method BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 90 90 90 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 75 75 -||- Temperature of stickiness, not less than 0С 50 50 50 -||- Stamina, number of cycles, no less than – 30000 30000 30000 -||- Water absorption, not more than % 0,2 0,2 0,2 -||- Change in properties under UV irradiation, not more than ч 1000 1000 1000 -||- -
You've just added this product to the cart:
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Read MoreQuick viewSurfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
-
You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreQuick viewSurfacing waterproofing material Technoelast Thermo EPP
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
-
You've just added this product to the cart:
Bituminous polymer polymeric Albizol (BP)
Read MoreQuick viewBituminous polymer polymeric Albizol (BP)
Price on requestUsage: Airport, Parking of cars, Reconstruction of roads, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of industrial seams, Waterproofing of road surfaces
Bituminous polymer polymeric Albizol (BP) – produced at the Kostroma waterproofing materials plant, is an improved and more inexpensive modification of the bituminous polymer sealant Technonikol (higher adhesion, higher softening point, more UV stabilizers). It is used to seal expansion joints, to rehabilitate temperature and strength cracks in cement concrete, asphalt and concrete and polymer-concrete coatings of roads, bridges, aerodromes (there is an experience of Albizol application both at civil airfields and military ones)
The name of indicators Unit. measurements Value BP-G25 BP-G35 BP-G50 Softening temperature, not lower than 0С 100 100 100 Flexibility on the rod Æ 20 mm, not higher 0С -25 -35 -50 Relative elongation at the moment of rupture, not less than at -20 ° C % 75 150 200 Temperature of stickiness, not less than 0С 50 50 50 Stamina, number of cycles, no less than – 30000 30000 30000 Water absorption, not more than % 0,5 0,5 0,5 Change in properties under UV irradiation, not more than h 1000 1000 1000 -
Mastic bitumen-rubber № 20
Price on requestUsage: Inversion roofs, Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
