The claimed characteristics of the materials sold by us may differ only for the better
Materials for the device of mastic roofs
In our assortment you can find various mastics (rubber, polymer, aluminum, etc.), recommended by manufacturers for the device of mastic roofs together with reinforcing materials (fiberglass, fiberglass).
Mastic bitumen-polymer MKTN
The peculiarity of bitumen-polymer mastic MKTN is in the widest temperature range of its application (from -200 to +300 degrees). The usage regulations developed by the manufacturer for this mastic include: the device and repair of all types of roofs (pitched and flat, in combination with rolled waterproofing materials, glass fabrics and without them), for waterproofing of buried objects (foundations, cellars, piles, etc.)
Mastic bitumen-rubber “Stroymast”
Mastic bituminous rubber “Stroymast” is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). It is an inexpensive equivalent of Tekhnonikol mastic # 20.
Mastic bitumen-rubber № 20
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
Mastic protective polymeric aluminum №57
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
Mastic water-emulsion №33
Waterproofing water-based mastic cold application Tekhnonikol No. 33 – modified latex and polymer modifiers, does not contain organic solvents. The peculiarity of this mastic is the absence of solvents, which makes it possible to use it in internal premises, it can be applied either mechanically (with the help of a sprayer) or manually (with a roller and brush).
Mastics roofing waterproofing № 31
Mastic roofing emulsion No. 31 consists of petroleum bitumen, modified with artificial rubber, technological additives and mineral fillers and does not contain organic solvents, which also allows for the use of mastic for internal waterproofing works. In addition, Mastic No. 31 has one of the highest adhesion values with concrete in the whole line of Tekhnonikol mastics.
Mastics roofing waterproofing №21 (Technomast)
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. An important difference between roofing mastics and waterproofing mastics is the presence of ultraviolet stabilizers.
Mastics waterproofing bitumen cold MBH
Mastics waterproofing MBH is a bitumen mass, modified with rubber, organic solvents, SBS modifiers, and polymers, in addition, to give greater strength bulkiness to the final mass, contains particles of asbestos (which allows the use of this mastic for smearing joints on industrial hotbeds, joints wood and glass, etc. It can be used almost in construction: in the construction of waterproofing foundations, roofs, anti-corrosion and waterproofing protection of the building structures.
Mastics waterproofing universal MBU “Econom” ZKM
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. In the composition of this mastic there are also stabilizers, which protect against UV exposure.