The claimed characteristics of the materials sold by us may differ only for the better
Design of solid waste landfills
Bentonite geomat ASL
Usage: Construction of open-cut tunnels, Drainage of retaining walls, Industrial waste dumps, Landfills, Protection against radon and methane, Replacement of deck flooring, Reservoir, Sludge dumps, Tombs of toxic and radioactive waste, Tunnel construction in a closed way
- Bentonite geomat ASL – in contrast to the standard bentonite mat AS is equipped with a fourth layer – LDPE membrane thickness from 0.2 to 0.6 mm. Used in cases with increased requirements for the environment, or for the installation of dumps of toxic and radioactive materials.
Index АС 50 АС 100 АСL 50 АСL 100 Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than3,0×10-11
3,0×10-111,5×10-11
1,5×10-110.0
3,0×10-110.0
1,5×10-11Degree of swelling, ml / 2g, not less than 24 24 24 24 Surface density of bentonite mat, kg / m2, ± 10 3.9 5.2 4.1 5.4 Tensile strength (along / across), kH / m, not less than 12/10 12/10 12/10 12/10 Adhesion strength, N / m, not less than 400 400 400 400 Resistance to hydrostatic pressure, atm, not less than 5 6 5 6 The thickness of the material at a load of 2 kPa, mm, ± 10% 6.0 6.4 6.2 6.6 Geo-polyester in the ground (impregnation of PVC)
Usage: Airport, Base of the roadway, Container terminals, Landfills, Parking lots with heavy equipment, Railways
- Polyester geogrid with impregnation on the basis of PVC is used to strengthen roadbeds in the base with insufficient bearing capacity in order to prevent the formation of stakes, cracks, etc.
50 / 50 100 / 100 150 / 150 200 / 200 Сырьё Полиэфир [PET] Пропитка ПВХ Прочность при растяжении (вдоль/поперёк), не менее, кН/м 50 / 50 100 / 100 150 / 150 200 / 200 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 250 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 Geomembrane anchor (anchor plate)
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LDPE smooth without thermal bonding
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste, Waterproofing of road surfaces
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LLDPE with geotextile (double-sided thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LLDPE with geotextile (one-side thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (one-side thermal bonding) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane shaped spike
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geotextile non-woven needle-punched 450
Usage: “The wall in the ground”, Base of the roadway, Concrete preparation, Construction of motorways, Deep drainage, Landfills, Parking lots with heavy equipment, Recycling, Reinforcement of asphalt concrete, Reinforcing the roadbed, Reservoir, Road construction, Under the foundation, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 500
Usage: “The wall in the ground”, Concrete preparation, Construction of motorways, Deep drainage, Green roofs, Landfills, Parking lots with heavy equipment, Protection of waterproofing foundations, Railways, Reinforcement of asphalt concrete, Reinforcing the roadbed, Road construction, Under the foundation, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile nonwoven needle-punched 400
Usage: “The wall in the ground”, Base of the roadway, Concrete preparation, Construction of motorways, Deep drainage, Landfills, Parking lots with heavy equipment, Recycling, Reinforcement of asphalt concrete, Reinforcing the roadbed, Reservoir, Road construction, Under the foundation, Under the foundation of 3 or more floors
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Usage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Usage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
Woven Geotextile 100-100 (PP)
Usage: Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 100 – has average strength characteristics in the range of woven polypropylene geotextiles, can be used for reinforcement, separation of layers, drainage and protection on any objects without pronounced requirements for increased strength.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 Woven Geotextile 100-100 / 100-50 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 100 is a woven fabric of medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 60 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven geotextile 150-100 / 150-50 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 150 is a woven fabric of medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 75 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven Geotextile 150-150 (PP)
Usage: Airport, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Parking lots with heavy equipment, Railways, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, Strengthening the foundations of railway embankments, Stylobates loaded, The device of drainage systems
- Woven geotextile 150 is the most durable woven geotextile in the woven polypropylene fabric line, high uniform (longitudinal and transverse) strength of the geotextile makes it possible to use it at objects with increased reliability requirements (NPPs, CHPPs, Airports, railways, etc.)
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800 Woven Geotextile 200-100 / 200-50 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 200 – woven fabric, increased strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 100 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven geotextile 80-80 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 80 – woven fabric, medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 50 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 Woven Geotextile 80-80 (PP)
Usage: Drainage layer, Drainage of retaining walls, Forest and access roads, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Reinforcing the roadbed, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 80 – has average strength characteristics in the range of woven polypropylene geotextiles, can be used for reinforcement, separation of layers, drainage and protection on any objects without pronounced requirements for increased strength.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile PP 20/20 20/20 100 Woven Geotextile PP 33/33 33/33 150 Woven Geotextile PP 40/40 40/40 240 Woven Geotextile PP 50/50 50/50 320 Woven Geotextile PP 80/80 80/80 500 Woven Geotextile PP 100/100 100/100 630 Woven Geotextile PP 150/150 150/150 800