The claimed characteristics of the materials sold by us may differ only for the better
Inversion roofs
In our assortment we present the highest quality materials for the inversion and ballast roofs in the domestic market: profiled membranes for gardening and providing drainage, waterproofing materials: roll bituminous materials of the “Technoelast” series, polymer PVC, TPO and EPDM membranes of European and American production, quality thermally bonded geo-textile Typar for the device of a separation and drainage layer with a low siltation index and a high degree of water permeability aust. Need a consultation? – Call!
Geotextile non-woven needle-punched 250
Usage: Armorranean mounds, Artificial lawn on sports grounds, Drainage layer, Garden paths, Inversion roofs, Landscaping, Materials for the arrangement of parking places, Natural lawn on sports grounds, Reinforcement of slopes, Scaffolding, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Mastic bitumen-rubber № 20
Usage: Inversion roofs, Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
Mastics roofing hot MBG
Usage: Inversion roofs, Waterproofing (anticorrosive protection) of steel structures, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Roofing mastics of hot application MBG is designed for effective repair and the construction of flat roofs, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material. It is an inexpensive equivalent of the popular Tekhnonikol mastic “Eureka”
Mastics roofing waterproofing № 31
Использование: Inversion roofs, Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic roofing emulsion No. 31 consists of petroleum bitumen, modified with artificial rubber, technological additives and mineral fillers and does not contain organic solvents, which also allows for the use of mastic for internal waterproofing works. In addition, Mastic No. 31 has one of the highest adhesion values with concrete in the whole line of Tekhnonikol mastics.
Mastics waterproofing № 24 (MGTN)
Usage: Inversion roofs, Parking of cars, Waterproofing of foundations
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
Profiled geomembrane Planter Gigant
Usage: Artificial gardening, Green roofs, Inversion roofs
- Profiled membrane Planter Giant with projections of profile 20 mm and additional perforation is used for the device of green roofs, as well as areas and artificial landscaping.
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Usage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
Surfacing waterproofing material Technoelast Thermo EPP
Usage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Usage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Usage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Usage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.