The claimed characteristics of the materials sold by us may differ only for the better
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Price on request
- Additional information
- Questions & Answers
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technology requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
Despite the fireless mounting method, adhesion to the substrate is identical to the adhesion strength of the fusion method, adhesion is provided not only by the mastic, but also by the fine-grained sand that is coated with the Technoelast Prime EMM material from the installation side. The use of this material makes it possible to combine the positive properties of monolithic mastic waterproofing in the structure, as well as the high physical and mechanical characteristics of rolled bituminous materials.
The basis of the material is polyester, the top coating is sand, the bottom is sand.
|Material of manufacture||
|Basis of material||
|Roll width, m||
|Temperature of flexibility on the bar, C||
|Heat resistance, С||
|Specific gravity, kg / m2||
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
Mastics roofing waterproofing №21 (Technomast)
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. An important difference between roofing mastics and waterproofing mastics is the presence of ultraviolet stabilizers.
Mastics waterproofing № 24 (MGTN)
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
Mastic roofing hot № 41 (Eureka)
Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material