The claimed characteristics of the materials sold by us may differ only for the better
Sludge dumps
Bentonite geomat ASL
Usage: Construction of open-cut tunnels, Drainage of retaining walls, Industrial waste dumps, Landfills, Protection against radon and methane, Replacement of deck flooring, Reservoir, Sludge dumps, Tombs of toxic and radioactive waste, Tunnel construction in a closed way
- Bentonite geomat ASL – in contrast to the standard bentonite mat AS is equipped with a fourth layer – LDPE membrane thickness from 0.2 to 0.6 mm. Used in cases with increased requirements for the environment, or for the installation of dumps of toxic and radioactive materials.
Index АС 50 АС 100 АСL 50 АСL 100 Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than3,0×10-11
3,0×10-111,5×10-11
1,5×10-110.0
3,0×10-110.0
1,5×10-11Degree of swelling, ml / 2g, not less than 24 24 24 24 Surface density of bentonite mat, kg / m2, ± 10 3.9 5.2 4.1 5.4 Tensile strength (along / across), kH / m, not less than 12/10 12/10 12/10 12/10 Adhesion strength, N / m, not less than 400 400 400 400 Resistance to hydrostatic pressure, atm, not less than 5 6 5 6 The thickness of the material at a load of 2 kPa, mm, ± 10% 6.0 6.4 6.2 6.6 Geomembrane anchor (anchor plate)
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LDPE smooth without thermal bonding
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste, Waterproofing of road surfaces
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LLDPE with geotextile (double-sided thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane HDPE / LLDPE with geotextile (one-side thermal bonding)
Usage: Accumulation and emergency tanks, Biogas Reactors, Drainage of bulk dams, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (one-side thermal bonding) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.
Geomembrane shaped spike
Usage: Accumulation and emergency tanks, Biogas Reactors, Hydrotechnical works, Industrial waste dumps, Landfills, Oil puddles, Ponds and reservoirs, Reservoirs for water, Silo pits, Sludge dumps, Stylobates loaded, Tombs of toxic and radioactive waste
- Geomembrane HDPE with geotextile (double-sided thermosetting) – is used in areas with unprepared bases to prevent possible puncture formation, in soils with sharp inclusions up to 40 mm in size.