The claimed characteristics of the materials sold by us may differ only for the better
Mastics roofing hot MBG
Price on request
- Description
- Additional information
- Questions & Answers
Description
Roofing mastics of hot application MBG is designed for effective repair and the construction of flat roofs, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material. It is an inexpensive equivalent of the popular Tekhnonikol mastic “Eureka”
Before the production of the work, it is necessary to heat the mastic to a temperature of 150-170 degrees, it is recommended to apply the mastic with a spatula, brush or roller
Additional information
| Strength of adhesion to concrete, MPa | 0.2 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.25 |
| Strength of adhesion between roll materials, MPa | 0.15 |
| Прочность сцепления рулонный материал-бетон, МПа | 0.15 |
| Shear strength of adhesive joint, kN / m | 4 |
| Conditional strength, MPa | 0.2 |
| Relative elongation at break,% | 1100 |
| Water absorption for 24 hours, by weight | 1 |
| Массовая доля нелетучих веществ, % | – |
| Heat resistance, С | +130 |
| Temperature of flexibility on the bar, C | – |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreQuick viewWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
Price on requestUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
-
You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreQuick viewWelding waterproofing material Technoelast EPP + 100 / -25 5.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
-
You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreQuick viewSurfacing waterproofing material Technoelast Thermo EPP
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Read MoreQuick viewWeldable waterproofing material Technoelast Alpha EPP -20 / + 100
Price on requestUsage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
Связанные материалы
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Read MoreQuick viewWeldable waterproofing material Technoelast HPP + 100 / -25 4.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
-
Bentonite geomat AC
4.55 $ Price per m² (EXW / Retail)Usage: Accumulation and emergency tanks, Base of the roadway, Construction of open-cut tunnels, Drainage of retaining walls, Inversion roofs, Landfills, Oil puddles, Ponds and reservoirs, Reinforcement of slopes, Replacement of deck flooring, Reservoir, Sludge dumps, The foundation with a laying from 3 to 10 meters, Tunnel construction in a closed way, Under the foundation of 3 or more floors, Waterproofing of foundations
- Bentonite geomat AS is a material used for the construction of large areas of the waterproofing layer, including at extremely low temperatures, unlike other waterproofing, the bentonite mat “works” only at a load of 100 kg / m2 and is not subject to mechanical damage.
Index АС 50 АС 100 АСL 50 АСL 100 Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than3,0×10-11
3,0×10-111,5×10-11
1,5×10-110.0
3,0×10-110.0
1,5×10-11Degree of swelling, ml / 2g, not less than 24 24 24 24 Surface density of bentonite mat, kg / m2, ± 10 3.9 5.2 4.1 5.4 Tensile strength (along / across), kH / m, not less than 12/10 12/10 12/10 12/10 Adhesion strength, N / m, not less than 400 400 400 400 Resistance to hydrostatic pressure, atm, not less than 5 6 5 6 The thickness of the material at a load of 2 kPa, mm, ± 10% 6.0 6.4 6.2 6.6 -
You've just added this product to the cart:
Welded waterproofing material BilastMost +110 6.0 EPP
Read MoreQuick viewWelded waterproofing material BilastMost +110 6.0 EPP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
BilastMost EPP is an inexpensive substitute for popular materials TechnoelastMost B, Mostoizol 110, designed specifically for the construction of a waterproofing layer for multi-level open parking, bridges, etc. But also the material due to high weighting (6.0 kg / m2) can be used for the construction of a waterproofing layer of the foundation in one layer (instead of the classic two EPG + EPP, recommended by most design organizations).
-
You've just added this product to the cart:
Geotextile non-woven needle-punched 250
Read MoreQuick viewGeotextile non-woven needle-punched 250
0.60 $ Price per m² (EXW / Retail)Usage: Armorranean mounds, Artificial lawn on sports grounds, Drainage layer, Garden paths, Inversion roofs, Landscaping, Materials for the arrangement of parking places, Natural lawn on sports grounds, Reinforcement of slopes, Scaffolding, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
