The claimed characteristics of the materials sold by us may differ only for the better
Mastics roofing waterproofing № 31
29.30 $ Average wholesale price per bucket 16 kg
- Description
- Additional information
- Questions & Answers
Description
Mastic roofing emulsion No. 31 consists of petroleum bitumen, modified with artificial rubber, technological additives and mineral fillers and does not contain organic solvents, which also allows the use of mastic for internal waterproofing works. In addition, Mastic No. 31 has one of the highest adhesion values with concrete in the entire line of Tekhnonikol mastics.
The order of application of Mastics waterproofing roofing № 31 provides devices of mastic roofs (consumption 3.8-5.7 kg / m2), repair of flat and pitched roofs in combination with fiberglass, roll waterproofing materials and without them. Can be used for waterproofing recessed building structures (foundations, cellars, etc.). (flow rate 2.5-3.5 kg / m2). Also, the absence of an organic solvent will allow to conduct waterproofing works inside the premises with high humidity (bathrooms, saunas, baths, balconies, etc.)
Additional information
| Strength of adhesion to concrete, MPa | 0.3 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.36 |
| Strength of adhesion between roll materials, MPa | 0.3 |
| Прочность сцепления рулонный материал-бетон, МПа | 0.3 |
| Shear strength of adhesive joint, kN / m | 4 |
| Conditional strength, MPa | 0.5 |
| Relative elongation at break,% | 700 |
| Water absorption for 24 hours, by weight | 0.4 |
| Массовая доля нелетучих веществ, % | 55 |
| Heat resistance, С | +100 |
| Temperature of flexibility on the bar, C | -25 |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
- You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreБыстрый просмотрWelding waterproofing material Technoelast EPP + 100 / -25 5.0
2.77 $ Approximate price per square meterUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
- You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreБыстрый просмотрSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
2.56 $ Approximate price per square meterUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
- You've just added this product to the cart:
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Read MoreБыстрый просмотрWeldable waterproofing material Technoelast Alpha EPP -20 / + 100
5.63 $ Approximate price per square meterUsage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
313.00 $ Approximate price per square meterUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
4.30 $ Approximate price per square meterUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
- You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreБыстрый просмотрSurfacing waterproofing material Technoelast Thermo EPP
2.96 $ Approximate price per square meterUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
Связанные материалы
- You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreБыстрый просмотрSurfacing waterproofing material Technoelast Thermo EPP
2.96 $ Approximate price per square meterUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
4.30 $ Approximate price per square meterUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
Mastic bitumen-rubber № 20
1,650.00 $ Approximate price per bucketUsage: Inversion roofs, Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastic bituminous-rubber № 20 is designed for any waterproofing work, produced outdoors. The composition of the mastic is SBS-modified bitumen, technological additives, mineral fillers, as well as an organic solvent (the presence of which excludes the use of mastic for internal waterproofing operations). A special feature of the mastic is its high hardness when drying, as well as a high temperature range of application (can be stacked at -20 to +40 degrees)
- You've just added this product to the cart:
Mastics waterproofing № 24 (MGTN)
Read MoreБыстрый просмотрMastics waterproofing № 24 (MGTN)
22.35 $ Retail price per bucketUsage: Inversion roofs, Parking of cars, Waterproofing of foundations
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
313.00 $ Approximate price per square meterUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
