The claimed characteristics of the materials sold by us may differ only for the better
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
1.77 $ Approximate price per square meter
- Description
- Additional information
- Questions & Answers
Description
Technoelast HPP is an economical version of its analog on a polyester basis (Technoelast EPP), its use is allowed in the device of waterproofing the foundation as the lower layer of a two-layer waterproofing system, or in cases where the building construction provides 100% protection of the foundation waterproofing from backfilling (protection of waterproofing can be carried out by using profiled membranes, thermally bonded durable geotextiles such as Typar SF57, or by using heat-insulating materials, if such ie provided the project.)
Application of the roll material Technoelast HPP is very wide – the device of the lower (vapor barrier) layer of flat roofs (including exploited ones), the device of waterproofing the foundation with mandatory protection against backfilling, or, as well as conducting waterproofing works on base plates and other purposes.
Technoelast HPP is made from bitumen with the addition of SBS modifiers, polyester at the base, which is less durable than fiberglass for longitudinal and transverse stretching, but is much stronger in fracture, puncture and pressure resistant. Coating from below is an adhesive film, on top is an adhesive film. Declared life of the material in any building structure is not less than 25 years.
Additional information
| Material Marking | HFP |
|---|---|
| Material of manufacture | Bitumen (SBS) |
| Winding, m | 10 |
| Basis of material | Glass fiber canvas |
| Cover (bottom) | Membrane |
| Cover (top) | Membrane |
| Roll width, m | 1 |
| Temperature of flexibility on the bar, C | -25 |
| Heat resistance, С | +100 |
| Specific gravity, kg / m2 | 4 |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
Mastic water-emulsion №33
155.00 $ Approximate price per bucketUsage: Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations
Waterproofing water-based mastic cold application Tekhnonikol No. 33 – modified latex and polymer modifiers, does not contain organic solvents. The peculiarity of this mastic is the absence of solvents, which makes it possible to use it in internal premises, it can be applied either mechanically (with the help of a sprayer) or manually (with a roller and brush).
- You've just added this product to the cart:
Mastics waterproofing universal MBU "Econom" ZKM
Read MoreБыстрый просмотрMastics waterproofing universal MBU “Econom” ZKM
1,025.00 $ Retail price per bucketUsage: Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. In the composition of this mastic there are also stabilizers, which protect against UV exposure.
- You've just added this product to the cart:
Mastics roofing waterproofing №21 (Technomast)
Read MoreБыстрый просмотрMastics roofing waterproofing №21 (Technomast)
43.25 $ Approximate price per bucket 20 kgUsage: Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. An important difference between roofing mastics and waterproofing mastics is the presence of ultraviolet stabilizers.
- You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreБыстрый просмотрSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
2.56 $ Approximate price per square meterUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
- You've just added this product to the cart:
Mastics waterproofing № 24 (MGTN)
Read MoreБыстрый просмотрMastics waterproofing № 24 (MGTN)
22.35 $ Retail price per bucketUsage: Inversion roofs, Parking of cars, Waterproofing of foundations
Tekhnonikol waterproofing mastic # 24 is designed for waterproofing concrete structures, concrete products, wood and other building structures that are buried and are in permanent or permanent contact with water. It is important to note that this mastic is not roofing (ie does not contain ultraviolet stabilizers, as well as rubber impurities), that is, the use of MGTN No. 24 for repair and roofing is highly discouraged.
Mastic bitumen-polymer MKTN
Approximate price per bucketUsage: Mastic roofs, Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
The peculiarity of bitumen-polymer mastic MKTN is in the widest temperature range of its application (from -200 to +300 degrees). The usage regulations developed by the manufacturer for this mastic include: the device and repair of all types of roofs (pitched and flat, in combination with rolled waterproofing materials, glass fabrics and without them), for waterproofing of buried objects (foundations, cellars, piles, etc.)
Связанные материалы
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
4.30 $ Approximate price per square meterUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
Woven geotextile 80-80 (PET)
2.98 $ Approximate middle wholesale price per square meterUsage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 80 – woven fabric, medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 50 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420 - You've just added this product to the cart:
Geo-grating polyester in asphalt (impregnation with bitumen)
Read MoreБыстрый просмотрGeo-grating polyester in asphalt (impregnation with bitumen)
1.10 $ – 2.50 $ Approximate middle wholesale price per square meterUsage: Airport, Forest and access roads, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Polyester geogrid with bituminous impregnation (impregnation is used to improve adhesion with asphalt), is used for reinforcing asphalt-concrete layers in road construction, in order to prevent the formation of cracks and sprawl of the roadway.
30 / 30 50 / 50 80 / 80 100 / 100 Сырьё Полиэфир [PET] Пропитка Дисперсия на основе битума Прочность при растяжении (вдоль/поперёк), не менее, кН/м 30 / 30 50 / 50 80 / 80 100 / 100 Относительное удлинение при максимальной нагрузке, не более, % 13 Теплостойкость, не менее, % 90 Устойчивость к ультрафиолетовому излучению, не менее, % 90 Химическая стойкость к агрессивным средам, не менее, % 80 Масса на единицу поверхности г/м2 190 ± 10 250 ± 10 370 ± 10 500 ± 10 Температурный диапазон От – 60°C до + 190°C Размер рулона Ширина, м, ± 0,1 5,2 Длина в рулоне, м, ± 1 % от 50 до 150 Geogrids from glass fiber
0.85 $ – 1.60 $ Approximate middle wholesale price per square meterUsage: Airport, Materials for the arrangement of parking places, Prevention of reflected cracks, Railways, Reconstruction of roads, Reinforcement of asphalt concrete, Reinforcing the roadbed, Road construction, Strengthening of asphalt-concrete seam, Strengthening of pavement
- Fiberglass geogrid – can be used for reinforcing asphalt concrete instead of classical polyester geogrid with bituminous impregnation, if the predicted lifetime of the roadway does not exceed 3 years.
Designation of a glass mesh Surface density, g / m2, not less than Tensile strength, kN / m Elongation at maximum load,%, not more than Strength of nodal connections from strength of weft,% not less than Dimensions of the sides of the square of cells, mm, ± 2 mm вдоль поперёк SSNP 40/40 200 40 40 4 10 25
37
40
50SSNP 50/50 250 50 50 10 SSNP 70/70 350 70 70 7 SSNP 80/80 400 80 80 6 SSNP 90/90 450 90 90 6 SSNP 100/100 500 100 100 5 SSNP К 40/40 250 40 40 10 SSNP К 50/50 300 50 50 10 SSNP К 70/70 400 70 70 7 SSNP К 80/80 450 80 80 6 SSNP К 90/90 500 90 90 6 SSNP К 100/100 550 100 100 5 Roll size Width, m, ± 0,1 5,2 Length in roll, m, ± 1 % от 50 до 150 Bentonite geomat AC
4.55 $ Approximate middle wholesale price per square meterUsage: Accumulation and emergency tanks, Base of the roadway, Construction of open-cut tunnels, Drainage of retaining walls, Inversion roofs, Landfills, Oil puddles, Ponds and reservoirs, Reinforcement of slopes, Replacement of deck flooring, Reservoir, Sludge dumps, The foundation with a laying from 3 to 10 meters, Tunnel construction in a closed way, Under the foundation of 3 or more floors, Waterproofing of foundations
- Bentonite geomat AS is a material used for the construction of large areas of the waterproofing layer, including at extremely low temperatures, unlike other waterproofing, the bentonite mat “works” only at a load of 100 kg / m2 and is not subject to mechanical damage.
Index АС 50 АС 100 АСL 50 АСL 100 Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than3,0×10-11
3,0×10-111,5×10-11
1,5×10-110.0
3,0×10-110.0
1,5×10-11Degree of swelling, ml / 2g, not less than 24 24 24 24 Surface density of bentonite mat, kg / m2, ± 10 3.9 5.2 4.1 5.4 Tensile strength (along / across), kH / m, not less than 12/10 12/10 12/10 12/10 Adhesion strength, N / m, not less than 400 400 400 400 Resistance to hydrostatic pressure, atm, not less than 5 6 5 6 The thickness of the material at a load of 2 kPa, mm, ± 10% 6.0 6.4 6.2 6.6
