The claimed characteristics of the materials sold by us may differ only for the better
Profile for universal operated expansion joint mortgage DPSH-50 (DPSH-UGL-50)
Usage: Sealing device for expansion joints, The device of expansion joints, The device of expansion joints at conjugation with PVC membranes, The device of expansion joints in underground parking lots
Deformation profile DPSH-50 (DPSh-50-UGL). (DPSh-50-UGL)) – designed for the construction of expansion joints in conjunction with waterproof PVC-membranes on flat roofs, bridges, underground and above-ground parking lots and other structures where full waterproofing of the coating is required in conjugation with a deformation seam. Deformation profile DPHS withstands high loads. in t.ch. cargo motor transport on pneumatic tires with a carrying capacity of up to 40 tons, as well as any types of loaders, roaches, etc.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DPSH–50 / 050 П1–102 5 30 30 50 105 212 3 DPSH–50–UGL / 050 П2–076 5 30 30 50 78 130 3 Profile for universal operated expansion joint mortgage DSHA.-T-30 (DSHA.-T-30)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.Т–30 / 085 А.Т1–075 10 10 15 85 83/195 0,7 DSHA.Т–30–UGL / 085 83/139 Profile for universal operated expansion joint mortgage DSHA.-T-50 (DSHA.-T-50)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DZHA.-T-50 (DZHA.-T-50) (Dilatation device Akvastop / Akvabarer DZHA.-T-50 (DZHA.-T-50 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. from 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Сжатие Растяжение Сдвиг А В/С DSHA.Т–50 / 055 А.Т1–075 10 10 15 85 70
83/195 0,7 DSHA.Т–50–UGL / 070 83/139 Profile for universal operated expansion joint mortgage DSHA.-T-70 (DSHA.-T-70)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DZHA.-T-70 (DSCA.-T-70) (Dilatation device Aquastop / Aqua Barrier DSCA.-T-70 (DZHA.-T-70 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo transport with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint from 55 to 70 mm, it is also possible to produce this deformation profile in the angular version. coating thickness of 70 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.Т–70 / 055 А.Т1–075 10 10 15 55 70
83/195 0,7 DSHA.Т–70–UGL / 070 83/139 Profile for universal operated expansion joint mortgage DSHA.TS 100 (DSHA.T UHL-100)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DSHA.TS-100 (Dilatation device AQUASTOP DSHA.TS-100-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 100 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS-100 А.ТС1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-100-UGL / 230 245/302 DSHA.TS-100 / 250 А.ТС1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-100-UGL / 270 285/342 DSHA.TS-100 / 300 А.ТС1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-100-UGL / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-30 (DSHA.TS-UGL-30).
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DZHA.TS-30 (Dilatation device AQUASTOP DASHA.TS-30-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–30 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-UGL-30 / 230 245/302 DSHA.TS–30 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-UGL-30 / 270 285/342 DSHA.TS–30 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-UGL-30 / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-50 (DSHA.T-UGL-50)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSCA.TS-50 (Dilatation device AQUASTOP DASHA.TS-50-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–50 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-UGL-50 / 230 245/302 DSHA.TS–50 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.T-UGL-50 / 270 285/342 DSHA.TS–50 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.T-UGL-50 / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-70 (DSHA.T-UGL-70)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHA.TS-70 (Dilatation device AQUASTOP DSHA.TS-70-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 70 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS-70 / 210 А.ТС1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-70-UGL / 230 245/302 DSHA.TS-70 / 250 А.ТС1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-70-UGL / 270 285/342 DSHA.TS-70 / 300 А.ТС1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-70-UGL / 320 335/392 Profile for universal operated expansion joint mortgage DSHKA-75 (DSHKA-UGL-75)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHKA-75 (Dilatation device Aquastop DSHKA-75-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (with the exception of forklifts on cast-iron and tire tires). The compensator is made of thermoplastic elastomer (TEP). Installation DSHKA-75 is carried out by a mortar way under a finish covering with the general thickness from 75 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B/C DSHKA-75/020 КЗ-044 15 35 10 20 50/165 0.90 DSHKA-UGL-75/040 40 55/112 DSHKA-75/030 КЗ-054 20 45 12 30 60/1750 0.90 DSHKA-UGL-75/050 50 65/122 DSHKA-75/040 КЗ-064 30 75 15 40 70/185 0.90 DSHKA-UGL-75/060 60 75/132 DSHKA-75/050 КЗ-074 40 80 20 50 80/195 0.90 DSHKA-UGL-75/070 70 80/142 DSHKA-75/070 КЗ-094 45 80 25 70 100/215 0.70 DSHKA-UGL-75/090 90 105/162 Profile for universal operated expansion joint mortgage DSHN-50 (DSHN-UGL-50)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DShN-50 / DShN-50-UGL (Dilatation device Akvastop DShN-50 / DShN-50-UGL) is used to seal expansion joints on surfaces with a high degree of operation (maximum load of 3.0 MPa), withstands any type of motor vehicle, including including load-carrying capacity up to 40 tons, as well as any kinds of loaders. The compensator is made of EPDM rubber, resistant to ultraviolet radiation and also to high and low operating temperatures, while still protecting the ingress of moisture and dust into the sealed space. Installation ДШН-50 – mortgage, is mounted under the finish coat with a thickness of up to 50 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DSHN-50 / 040 Н1–067 7 13 8 40 84 199 3 DSHN-UGL-50 / 060 60 84 142 DSHN-50 / 070 Н1–098 25 15 30 70 115 230 2,5 DSHN-UGL-50 / 090 90 115 173 DSHN-50 / 100 Н1–130 20 20 40 100 146 261 2 DSHN-UGL-50 / 120 120 146 204 Profile seal “Herringbone-K” (TEP)
Usage:
A special herringbone seal type is used for hermetic sealing and sealing of seams for the arrangement of floors, as well as for the construction of joints of reinforced concrete and metal structures. The bays of 250/500 linear meters are sold multiple times, typical sizes of the herringbone pattern: 3.5 / 3.8 / 4.0 / 4.2 / 4.3 / 4.6 / 4.7 / 4.8 / 5.0 / 5.2 / 5.5 / 6.0 / 7.0 mm. It is made of high-quality plasticized polyvinyl chloride.
Profile Profile width, mm Width of seam, mm Depth of the seam, mm (not less) Herringbone-K 3,5 3,5 2,6 11,2 Herringbone-K 3,8 3,8 2,8 12,1 Herringbone-K 4,0 4 3 12,8 Herringbone-K 4,2 4,2 3,2 13,5 Herringbone-K 4,6 4,6 3,4 14,6 Herringbone-K 4,8 4,8 3,6 15,3 Herringbone-K 5,0 5 3,8 15,9 Herringbone-K 5,5 5,5 4,1 17,3 Herringbone-K 5,8 5,8 4,3 18,2 Herringbone-K 6,0 6 4,5 18,9 Herringbone-K 7,0 7 5,2 21,9 Profile seal “Herringbone”
Usage:
A special herringbone seal type is used for hermetic sealing and sealing of seams for the arrangement of floors, as well as for the construction of joints of reinforced concrete and metal structures. The bays of 250/500 linear meters are sold multiple times, typical sizes of the herringbone pattern: 3.5 / 3.8 / 4.0 / 4.2 / 4.3 / 4.6 / 4.7 / 4.8 / 5.0 / 5.2 / 5.5 / 6.0 / 7.0 mm. It is made of high-quality plasticized polyvinyl chloride.
Profile Profile width, mm Width of seam, mm Depth of the seam, mm (not less) Herringbone 3,5 3,5 2,6 11,2 Herringbone 3,8 3,8 2,8 12,1 Herringbone 4,0 4 3 12,8 Herringbone 4,2 4,2 3,2 13,5 Herringbone 4,6 4,6 3,4 14,6 Herringbone 4,8 4,8 3,6 15,3 Herringbone 5,0 5 3,8 15,9 Herringbone 5,5 5,5 4,1 17,3 Herringbone 5,8 5,8 4,3 18,2 Herringbone 6,0 6 4,5 18,9 Herringbone 7,0 7 5,2 21,9 Profiled geomembrane 8 mm Planter Standart 250 kN / m²
Usage: “The wall in the ground”, Concrete preparation, Garden paths, Parking of cars, Protection of waterproofing foundations, Scaffolding, The device of drainage systems, Under the foundation
- Planter Standard – profiled membrane of the popular domestic manufacturer TekhnoNIKOL, 100% consists of secondary raw materials, due to which it has a relatively low price.
- Strength of the element with a geometrical deformation of not more than 10%: 250 kN / m²
Profiled geomembrane Planter Gigant
Usage: Artificial gardening, Green roofs, Inversion roofs
- Profiled membrane Planter Giant with projections of profile 20 mm and additional perforation is used for the device of green roofs, as well as areas and artificial landscaping.
PVC Geomembrane Logicbase V-SR (Logicroof T-SL) 1.5 / 2.0 mm
Usage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
PVC Geomembrane Plastfoil U 2.0 mm Penoplex
Usage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
- Plastfoil U 2.0 (GEO) is a non-reinforced PVC membrane with a thickness of 2 mm (a thickness of 1.5 mm is possible), used for waterproofing various underground structures.
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Usage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
Surfacing waterproofing material Technoelast Thermo EPP
Usage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Usage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Swelling bentonite profile PNB 20×10 Industrial
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling bentonite profile Aquastop (Type PNB), “industrial” is used for sealing technological seams, various joints in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, as well as for sealing communication types of buildings and structures and cracks in building structures. 20х10 (mm) – the size of the section
Swelling bentonite profile PNB 20х15 Industrial
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling bentonite profile Aquastop (Type PNB), “industrial” is used for sealing technological seams, various joints in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, as well as for sealing communication types of buildings and structures and cracks in building structures. 20х15 (mm) – the size of the section
Swelling bentonite profile PNB 25×19 Lux
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling bentonite profile. Aquastop (Type PNB), “lux” is used for sealing technological seams, various joints in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, and for sealing communication types of buildings and structures and cracks in building structures. The profile is characterized by a high limiting hydrostatic pressure (22 atm) in comparison with other swelling profiles (including rubber), as well as a larger volume expansion than standard bentonite swelling profiles.
Swelling bentonite profile PNB 25х15 Industrial
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling bentonite profile Aquastop (Type PNB), “industrial” is used for sealing technological seams, various joints in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, as well as for sealing communication types of buildings and structures and cracks in building structures. 25х15 (mm) – section size
Swelling rubber profile PNR 20×4 Econom
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling rubber profile Aquastop (Type PNR), economical is used for sealing technological seams, various contiguities in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, as well as for sealing communication types of buildings and structures and cracks in building structures.
Swelling rubber profile PNR 20×4 Standard
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling rubber profile Aquastop (Type PNR), the standard is used for sealing technological seams, various contiguities in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, as well as sealing communication types of buildings and structures and cracks in building structures.
Swelling rubber profile PNR ø8 Econom
Usage: Sealing cracks in building structures, Sealing joints of prefabricated reinforced concrete structures, Sealing process seams
Swelling rubber profile Aquastop (Type PNR), economical is used for sealing technological seams, various contiguities in the process of conducting concrete works, for sealing joints of prefabricated and reinforced concrete structures, as well as for sealing communication types of buildings and structures and cracks in building structures.
The profile for a universal expansion joint is exploited by the DSHA-50 mortgage (DSHA-50 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
The deformation profile DSHA-50 (DSHA UHL-50) (dilatation device Aquastop / Akvabarer DSHA-50 (DSHA UHL-50) – the device is designed for expansion joints in areas of high pedestrian operational load (malls, shops, etc.) compensator is made of profiled aluminum durable width large enough expansion joint 25 (maximum Sustained load 0.35 MPa) to 195 mm (minimum Carrying force of 0.03 MPa), depending on the modification, also possible to produce this deformation profile in the angular Installation of profile DZHA-50 – mortgage, mounted in front of the finish coat, with a total thickness of 50 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA–50 / 025 А1–030 5 5 6 25 38
50/165 0,35 DSHA–50–UGL / 038 50/108 DSHA–50 / 055 А1–050 15 14 10 55 68
80/195 0,25 DSHA–50–UGL / 068 80/138 DSHA–50 / 085 А1–070 22 30 13 75 98
110/225 0,1 DSHA–50–UGL / 098 110/168 DSHA–50 / 110 А2–130 13 26 20 110 125
135/250 0,05 DSHA–50–UGL / 125 135/195 DSHA–50 / 150 А2–170 30 26 25 150 165
175/290 0,05 DSHA–50–UGL / 165 175/235 DSHA–50 / 180 А2–200 30 26 30 180 195
205/320 0,03 DSHA–50–UGL / 195 205/265 The profile for the expansion joint is a universal joint operated DSHA.T-UGL.2
Usage: The device of expansion joints, The device of expansion joints with extreme loads
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.T-UGL.2 А.Т1–075 10 10 15 85 85 5 The profile for the expansion joint is a universal joint operated DSHB-50 (ДSHV-50 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile ДШВ-50 (ДШВ-50 УГЛ) (Dilatation device Akvastop / Akvabarer ДШВ-50 (ДШВ-50 УГЛ) – is developed for the device of deformation joints in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum load capacity of 0.15 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.The installation of the profile of the DSHV is a mortgage, it is installed under the space of a tile adhesive with a total thickness of 50 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHV-50/025 DSHV-50-UGL / 030 В0–032 2 2 3 25 30
35/125 35/80
0,15 В1–032 5 5 3 В2–032 1 2 3 DSHV-50/030 DSHV-50-UGL / 035 В0–038 5 5 4 30 35
40/130 40/85
0,15 В1–038 6 6 4 В2–038 2 2 4 DSHV-50 / 040 DSHV-50-UGL / 045 В0–049 9 9 6 40 45
50/140 50/95
0,10 В1–049 10 10 6 В2–049 2 3 6 DSHV-50 /050 DSHV-50-UGL / 055 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-50 / 060 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHV-50-UGL / 065 The profile for the expansion joint is a universal joint operated DSHV-20 (DSHV-20 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile ДШВ-20 (ДШВ-20 УГЛ) (Dilatation device Akvastop / Akvabarer ДШВ-20 (ДШВ-20 УГЛ) – it is developed for the device of deformation joints in zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.The installation of the profile of the DSHV is a mortgage, it is installed under the space of a tile adhesive with a total thickness of 20 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHV-20/025 DSHV-20-UGL / 030 В0–032 2 2 3 25 30
35/125 35/80
0,2 В1–032 5 5 3 В2–032 1 2 3 DSHV-20/030 DSHV-20-UGL / 035 В0–038 5 5 4 30 35
40/130 40/85
0,18 В1–038 6 6 4 В2–038 2 2 4 DSHV-20 / 040 DSHV-20-UGL / 045 В0–049 9 9 6 40 45
50/140 50/95
0,14 В1–049 10 10 6 В2–049 2 3 6 DSHV-20 /050 DSHV-20-UGL / 055 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-20 / 060 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHV-20-UGL / 065 The profile for the expansion joint is a universal joint-operated DZHL-50 (Dshl-50 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile Dshl-50 (Dshl-50 UGL) (Dilatation device Akvastop / Akvabarer Dshl-50 (Dshl-50 UGL) – designed for the construction of expansion joints with a high floor design (from 50 mm), deformation profile of the LSL according to the declared load (0.05 MPa) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 15 to 35 mm depending on the modification, of the given deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/С DSHL-15/005 L1–017 2 4 10 15 20/110 0.05 DSHL-15-UGL/015 20/65 DSHL-15/010 L1–021 3 40 20 25 25/115 0.05 DSHL-15-UGL/ 2025/70 25/70 DSHL-15/015 L1–027 5 4 15 30 30/120 0.03 DSHL-15-UGL/ 025 30/75 DSHL-15/025 L1–037 15 5 20 40 40/130 – DSHL-15-UGL/ 035 40/85 The profile for the expansion joint is a universal operated bill DSHKA-30 (DSHKA-30-UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DShKA-30 (Dilatation device Aquastop DShKA-30-UGL) is used for the device of highly exploited expansion joints, including coping with loads produced by any vehicles and loaders (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DZHA-30 is carried out by a mortar method for the final coating with a total thickness of 30 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B/C DSHKA-30/020 КЗ-044 15 35 10 20 50/165 1.20 DSHKA-30-UGL/040 40 55/112 DSHKA-30/030 КЗ-054 20 45 12 30 60/175 1.20 DSHKA-30-UGL/050 50 65/122 DSHKA-30/040 КЗ-064 30 75 15 40 70/185 1.20 DSHKA-30-UGL/060 60 75/132 DSHKA-30/050 КЗ-074 40 80 20 50 80/195 1.20 DSHKA-30-UGL/070 70 80/142 DSHKA-30/070 КЗ-094 45 80 25 70 100/215 0.90 DSHKA-30-UGL/090 90 105/162 The profile for the expansion joint is a universal operated bill DSHV-0 (DSLL-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSHV-0 (DSHV-0 UGL) (Dilatation device Akvastop / Akvabarer DSHV-0 (DSHV-0 UGL) – it is developed for the device of deformation seams in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels .The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 35 to 70 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHV-0 / 035 DSHV-0-UGL / 035 В0–032 2 2 3 35 110 72 0,2 В1–032 5 5 3 В2–032 1 2 3 DSHV-0 / 040 DSHV-0-UGL / 040 В0–038 5 5 4 40 115 77 0,18 В1–038 6 6 4 В2–038 2 2 4 DSHV-0 / 050 DSHV-0-UGL / 050 В0–049 9 9 6 50 125 87 0,14 В1–049 10 10 6 В2–049 2 3 6 DSHV-0 / 060 DSHV-0-UGL / 060 В0–060 12 12 8 60 135 97 0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-0 / 070 В0–068 14 14 10 70 145 107 0,06 DSHV-0-UGL / 070 The profile for the expansion joint is a universal operated bill DSV-15 (DShV-15 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSHV-15 (DSHV-15 UGL) (Dilatation device Aquastop / Aquabarrier DSHV-15 (DSHV-15 UGL) – is developed for the device of deformation joints in the zones of the increased pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the profile of the DSHV – a mortgage, is mounted under the space of the tile adhesive.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHV-15 / 035 DSHV-15-UGL / 035 В0–032 2 2 3 25 30
35/125 35/80
0,2 В1–032 5 5 3 В2–032 1 2 3 DSHV-15 / 040 DSHV-15-UGL / 040 В0–038 5 5 4 30 35
40/130 40/85
0,18 В1–038 6 6 4 В2–038 2 2 4 DSHV-15 / 050 DSHV-15-UGL / 050 В0–049 9 9 6 40 45
50/140 50/95
0,14 В1–049 10 10 6 В2–049 2 3 6 DSHV-15 / 060 DSHV-15-UGL / 060 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-15 / 070 В0–068 14 14 10 60 65
65/160 65/115
0,06 DSHV-15-UGL / 070 The profile for the expansion joint is a universal operated bill of lading DSHA-0 (DSHA-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DZHA-0 (DZHA-0 UGL) (Dila-Akvastop / Akvabarer DSCA-0 (DZHA-0 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformation joint to be adjusted from 50 to 205 mm depending on the modification, it is also possible to produce this deformation profile in the angular version. cover.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA–0 / 050 А1–030 5 5 6 50 220 0,35 DSHA–0–UGL / 050 135 DSHA–0 / 080 А1–050 15 14 10 80 250 0,25 DSHA–0–UGL / 080 165 DSHA–0 / 110 А1–070 22 30 13 110 280 0,1 DSHA–0–UGL / 110 195 DSHA–0 / 135 А2–130 13 26 20 135 305 0,05 DSHA–0–UGL / 135 220 DSHA–0 / 175 А2–170 30 26 25 175 345 0,05 DSHA–0–UGL / 175 260 DSHA–0 / 205 А2–200 30 26 30 205 375 0,03 DSHA–0–UGL / 205 290 The profile for the expansion joint is a universal operated consignment note DSHL-0 (DSHL-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of DZHL-0 / Dschl-0 UGL (Dilatation device Akvastop / Akvabarer Dshl-0 / Dschl-0 UGL) – designed for sealing deformation seams for finishing the floor, walls and ceilings, deformation profile of the LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP), the width of the expansion joint is from 20 to 40 mm, depending on the modification, it is also possible to release this deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DSHL-0/020 L1–017 2 4 10 20 120 0.05 DSHL-0-UGL / 020 70 DSHL-0/025 L1–021 3 40 20 25 125 0.05 DSHL-0-UGL / 025 75 DSHL-0/030 L1–027 5 4 15 30 130 0.05 DSHL-0-UGL / 030 80 DSHL-0/040 L1–037 15 5 20 40 140 0.05 DSHL-0-UGL / 040 90 The profile for the expansion joint is a universal operated overhead DPV
Usage: Sealing device for expansion joints, The device of expansion joints with extreme loads
Deformative overhead profile DPV – designed specifically for the construction of expansion joints in underground public parking lots (in shopping, administrative centers, etc.). The declared maximum load of 2.1 MPa allows to withstand the loads produced by any motor vehicles at any intensity. Installation of the expansion joint with a mortar for the finish coat with a total thickness of 8 mm (no more and no less). It is possible to paint in any color according to RAL. The width of the designed expansion joint is not fixed, it can vary from 40 to 60 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DPV-8/050 PV1-240/050 10 30 60 40-60 240 240 2.1 DPV-8/050 PV-88-СН 10 30 60 40-60 240 240 2.1 The profile for the expansion joint is universal, which is operated by the DSHV-35 mortar (DSHV-35 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile DSHV-35 (DSHV-35 УГЛ) (Dilatation device Akvastop / Akvabarer DSHV-35 (DSHV-35 UGL) – is developed for the device of deformation joints in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.), the maximum load-bearing capacity of 0.18 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the profile of the DSHV – a mortgage, is mounted under the space of tile adhesive with a total thickness of 35 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHV-35/025 DSHV-35-UGL / 030 В0–032 2 2 3 25 30
35/125 35/80
0,18 В1–032 5 5 3 В2–032 1 2 3 DSHV-35/030 DSHV-35-UGL / 035 В0–038 5 5 4 30 35
40/130 40/85
0,15 В1–038 6 6 4 В2–038 2 2 4 DSHV-35 / 040 DSHV-35-UGL / 045 В0–049 9 9 6 40 45
50/140 50/95
0,15 В1–049 10 10 6 В2–049 2 3 6 DSHV-35 /050 DSHV-35-UGL / 055 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-35 / 060 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHV-35-UGL / 065 The profile for the universal expansion joint is exploited by the DSHA-15 mortar (DSHA-15 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Distortion profile DZHA-15 (DZHA-15 UGL) (Dilatation device AQUASTOP / AquaBarrier DZHA-15 (DZHA-15 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (maximum withheld load of 0.35 MPa) to 205 (the minimum withstand load 0.25 MPa) mm depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-15 – mortgage, mounted in front of the finish coat, with a total thickness of 15 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA–15 / 025 А1–030 5 5 6 50 220 0,35 DSHA–15–UGL / 038 135 DSHA–15 / 055 А1–050 15 14 10 80 250 0,25 DSHA–15–UGL / 068 165 DSHA–15 / 085 А1–070 22 30 13 110 280 0,1 DSHA–15–UGL / 098 195 DSHA–15 / 110 А2–130 13 26 20 135 305 0,05 DSHA–15–UGL / 125 220 DSHA–15 / 150 А2–170 30 26 25 175 345 0,05 DSHA–15–UGL / 165 260 DSHA–15 / 180 А2–200 30 26 30 205 375 0,03 DSHA–15–UGL / 195 290 The profile for the universal expansion joint is exploited by the DSHA-75 mortgage (DSHA-75 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile DZHA-75 (DZHA-75 UGL) (Dila-75 dilatation device AquaStop / Aquabarrier DZHA-75 (DZHA-75 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (the maximum withstand load is 0.35 MPa) to 195 mm (the minimum withheld load is 0.03 MPa) depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-75 – mortgage, mounted in front of the finish coat, with a total thickness of 75 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA–75 / 025 А1–030 5 5 6 25 38
50/165 0,35 DSHA–75–UGL / 038 50/108 DSHA–75 / 055 А1–050 15 14 10 55 68
80/195 0,25 DSHA–75–UGL / 068 80/138 DSHA–75 / 085 А1–070 22 30 13 75 98
110/225 0,1 DSHA–75–UGL / 098 110/168 DSHA–75 / 110 А2–130 13 26 20 110 125
135/250 0,05 DSHA–75–UGL / 125 135/195 DSHA–75 / 150 А2–170 30 26 25 150 165
175/290 0,05 DSHA–75–UGL / 165 175/235 DSHA–75 / 180 А2–200 30 26 30 180 195
205/320 0,03 DSHA–75–UGL / 195 205/265 The profile for the universal expansion joint is exploited by the Dshl-30 mortar (DSHL-30 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of Dschl-30 / Dschl-30 UGL (Dilatation device Akvastop / Akvabarer Dshl-30 / Dschl-30 UGL) – designed for the device of expansion joints with high floor construction (from 30 mm), deformational profile of LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 5 to 35 mm depending on the modification, it is also possible to release this deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/С DSHL-15/005 Л1–017 2 4 10 15 20/110 0.05 DSHL-15-UGL/015 20/65 DSHL-15/010 Л1–021 3 40 20 25 25/115 0.05 DSHL-15-UGL/ 2025/70 25/70 DSHL-15/015 Л1–027 5 4 15 30 30/120 0.03 DSHL-15-UGL/ 025 30/75 DSHL-15/025 Л1–037 15 5 20 40 40/130 – DSHL-15-UGL/ 035 40/85 The profile for the universal expansion joint is maintained by the DSHV-0 mortgage (DSHV-0 UGL)
Usage: Устройство деформационных швов, Устройство деформационных швов с низкими нагрузками, Устройство угловых деформационных швов
Deformation profile of DSCH-0 (DSCH-0 UGL) (Dilatation device AQUASTOP / AQUABARER D-SHO-0 (DZHV-0 UGL) – designed for the construction of expansion joints in areas with increased pedestrian operational load (shopping centers, shops, etc.) The expansion joint is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 25 to 65 mm depending on the modification, it is also possible to release the deformed seams insulating profile angularly by mounting profile DSHO-0 -. invoice, mounted directly on the final coating.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHO-0/035 DSHO–0–UGL / 035 В0–032 2 2 3 25 30
35/125 35/80
0,15 В1–032 5 5 3 В2–032 1 2 3 DSHO-0/040 DSHO–0–UGL / 040 В0–038 5 5 4 30 35
40/130 40/85
0,15 В1–038 6 6 4 В2–038 2 2 4 DSHO-0/050 DSHO–0–UGL / 050 В0–049 9 9 6 40 45
50/140 50/95
0,10 В1–049 10 10 6 В2–049 2 3 6 DSHO-0/060 DSHO–0–UGL / 060 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHO-0/070 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHO–0–UGL / 070 The profile for the universal expansion joint is operated by the DSHO-24 mortar (DSHO-24 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile of DCHO-24 (DSPO-24 UGL) (Dilatation device AQUASTOP / AQUABARER DOSHO-24 (DSSO-24 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) In contrast to the expansion joints of the Dosho series, it is also designed for the movement of light vehicles of low intensity.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 25 to 65 mm depending on the modification, mation profile in the angular performance Installation Profile DSHO-24 -. the mortgage, is mounted in the adhesive base for the tiles of at least 24 mm in height.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHO-24/030 DSHO–24–UGL / 030 В0–032 2 2 3 30 35/156 35/95
0,25 В1–032 5 5 3 В2–032 1 2 3 DSHO-24/040 DSHO–24–UGL / 040 В0–038 5 5 4 30 35
44/161 44/100
0,25 В1–038 6 6 4 В2–038 2 2 4 DSHO-24/050 DSHO–24–UGL / 050 В0–049 9 9 6 40 45
54/171 54/110
0,20 В1–049 10 10 6 В2–049 2 3 6 DSHO-24/060 DSHO–24–UGL / 060 В0–060 12 12 8 50 55
64/181 64/120
0,20 В1–060 15 15 8 В2–060 3 3 8 DSHO-24/070 В0–068 14 14 10 60 65
74/191 74/130
0,15 DSHO–24–UGL / 070 The profile for the universal joint deformed joint Dshl-15 (Dshl-15 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of DZHL-0 / Dschl-0 UGL (Dilatation device Akvastop / Akvabarer Dshl-0 / Dschl-0 UGL) – designed for sealing deformation seams for finishing the floor, walls and ceilings, deformation profile of the LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP), the width of the expansion joint is from 20 to 40 mm, depending on the modification, it is also possible to release this deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DSHL-15/005 Л1–017 2 4 10 20 120 0.05 DSHL-15-UGL/015 70 DSHL-15/010 Л1–021 3 40 20 25 125 0.05 DSHL-15-UGL / 20 75 DSHL-15/015 Л1–027 5 4 15 30 130 0.03 DSHL-15-UGL / 025 80 DSHL-15/025 Л1–037 15 5 20 40 140 – DSHL-15-UGL / 035 90 Thermo-embedded geotextile Ekospan Geo 110 (PP)
Usage: Artificial gardening, Artificial lawn on sports grounds, Construction of motorways, Drainage layer, Garden paths, Landscaping, Natural lawn on sports grounds, Scaffolding, Shores of rivers and canals, The device of drainage systems, Underground parking lots
- Thermo-embedded geo-textiles Ecospan Geo 110, when compared with the popular analogue for technical characteristics, is between Typar SF32 and Typar SF37, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ecospan Geo – geotextile produced by the famous Hex company for the products of “Izospan”. Unlike Ecospan Geo 90, the main purpose of this material is drainage (not filtration) under load.
Indicators Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90 Structure nonwoven fabric nonwoven fabric Colour White/gray White/gray Presence of additives – – Surface density, g / m2 90 110 Deviation from the nominal surface density,% ±10% ±10% Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м Elongation at rupture, in length / width,%, not more than – – Water permeability, l / m2 26 25 Resistance to UV irradiation,%, not less than – – Width, m 1;2 1;2 Length in roll, m 5;10;25 5;10;25 Thermo-embedded geotextile Ekospan Geo 90 (PP)
Usage: Artificial gardening, Artificial lawn on sports grounds, Drainage layer, Garden paths, Landscaping, Natural lawn on sports grounds, Scaffolding, The device of drainage systems
- Thermo-embedded geo-textiles Ecospan Geo 90, when compared with the popular analogue for technical characteristics, is between Typar SF27 and Typar SF32, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ekospan Geo is a product of the famous Hex company for the production of Isospan.
Indicators Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90 Structure nonwoven fabric nonwoven fabric Colour White/gray White/gray Presence of additives – – Surface density, g / m2 90 110 Deviation from the nominal surface density,% ±10% ±10% Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м Elongation at rupture, in length / width,%, not more than – – Water permeability, l / m2 26 25 Resistance to UV irradiation,%, not less than – – Width, m 1;2 1;2 Length in roll, m 5;10;25 5;10;25 Volumetric geogrid with perforation
Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ODM 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at
– 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56
Volumetric geogrid without perforation
Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ОДМ 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at – 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56
Waterbar (Water-key) DO 220/25-4/25 (EPDM rubber)
Usage: Sealing of expansion joints (formwork)
Hydrostick DO 220 / 25-4 / 25 Aquastop (AquaBarrier) – according to the classification of the key waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this hydro-key is made of EPDM rubber, the width of the key is 220 mm, the width of the expansion joint is 25 mm, 4 – the number of anchors on the hydrostars, the height of the anchors – 25 mm.
Waterbar (Water-key) DO 240/20-4/25 (PVC)
Usage: Герметизация деформационных швов (опалубка)
Hydrostick DO 240 / 20-4 / 25 Aquastop (AquaBarrier) – according to the classification of the key, waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this hydro-key is made of PVC, the width of the key is 240 mm, the width of the expansion joint – 20 mm, 4 – the number of anchors on the hydrostars, the height of the anchors – 25 mm.
Waterbar (Water-key) DO 270/25-6/25 (EPDM rubber)
Usage: Sealing of expansion joints (formwork)
Waterstock DO 270 / 25-6 / 25 Aquastor (AquaBarrier) – according to the classification of the key waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this hydro-key is made of EPDM rubber, the width of the key is 270 mm, the width of the expansion joint is 25 mm, 6 – the number of anchors for hydrostars, the height of the anchors – 25 mm.
Waterbar (Water-key) DO 320/20-6/25 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DO 320 / 20-6 / 25 Aquastop (AquaBarrier) – according to the classification of the key waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this polyvinylchloride (PVC) water key is executed, the width of the key is 320 mm, the width of the expansion joint – 20 mm, 6 – the number of anchors for hydrostars, the height of the anchors – 25 mm.
Waterbar (Water-key) DO 320/30-6/30 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DO 320 / 30-6 / 30 Aquastop (AquaBarrier) – according to the classification of the key, waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this hydro-key is made of polyvinyl chloride (PVC), the width of the key is 320 mm, the width of the expansion joint – 30 mm, 6 – the number of anchors for hydrostars, the height of the anchors – 30 mm.
Waterbar (Water-key) DO 320/40-6/30 (PVC)
Usage: Герметизация деформационных швов (опалубка)
Hydrostick DO 320 / 40-6 / 30 Aquastop (AquaBarrier) – according to the classification of the key, waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this hydro-key is made of polyvinyl chloride (PVC), the width of the key is 320 mm, the width of the expansion joint – 40 mm, 6 – the number of anchors on the hydrostars, the height of the anchors – 30 mm.
Waterbar (Water-key) DO 320/50-6/30 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DO 320 / 50-6 / 30 Aquastop (AquaBarrier) – according to the classification of the key, waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this polyvinylchloride (PVC) water key is executed, the width of the key is 320 mm, the width of the expansion joint – 50 mm, 6 – the number of anchors on the hydrostars, the height of the anchors – 30 mm.
Waterbar (Water-key) DO 400/50-6/30 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DO 400 / 50-6 / 30 Aquastop (AquaBarrier) – according to the classification of dowel, waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this hydro-key is made of polyvinyl chloride (PVC), the width of the key is 400 mm, the width of the expansion joint – 50 mm, 6 – the number of anchors on the hydrostars, the height of the anchors – 30 mm.
Waterbar (Water-key) DV-170/12 (PVC)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (Aquabarrier) ДВ 170/12 (PVC) – a deformation internal key made of polyvinyl chloride, used for sealing expansion joints in the construction of buried and underground structures, 170 (mm) – the total width of the waterproofing key, 12 (mm) the width of the sealed expansion joint, filled with expanded polystyrene.
Waterbar (Water-key) DV-220/25 (EPDM rubber)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (Aquabarrier) ДВ-220/25 – deformation inner cuff of EPDM rubber, used to seal expansion joints in the construction of buried and underground structures, 220 (mm) – total width of the waterproofing key, 25 (mm) width of the expansion joint filled with expanded polystyrene .
Waterbar (Water-key) DV-240/20 (PVC)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (AquaBarrier) DV-240/20 (PVC) – deformation internal key made of polyvinyl chloride, used for sealing expansion joints in the construction of buried and underground structures, 240 (mm) – total width of the waterproofing key, 20 (mm) , filled with expanded polystyrene.
Waterbar (Water-key) DV-270/25 (EPDM rubber)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (Aquabarrier) DV-270/25 – deformation inner cuff of EPDM rubber, used to seal expansion joints in the construction of buried and underground structures, 270 (mm) – total width of the waterproofing key, 25 (mm) width of the expansion joint filled with expanded polystyrene .
Waterbar (Water-key) DV-320/20 (PVC)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (AquaBarrier) DV-320/20 (PVC) – deformation inner screw made of polyvinyl chloride, used for sealing expansion joints in the construction of buried and underground structures, 320 (mm) – total width of the waterproofing key, 20 (mm) , filled with expanded polystyrene.
Waterbar (Water-key) DV-320/30 (PVC)
Usage: Sealing of internal expansion joints
Water-stain Aquastop (AquaBarrier) DV-320/30 (PVC) is a deformation internal key made of polyvinyl chloride, used for sealing expansion joints in the construction of buried and underground structures, 320 (mm) – total width of the waterproofing key, 30 (mm) , filled with expanded polystyrene. The width of the expansion joint, which differs from the key TWO 320/20 by only 10 mm, increases the free movement of the key by 110% (from 12/30/30/15 to 28/70/70/40, respectively)
Waterbar (Water-key) DV-320/40 (PVC)
Usage: Sealing of internal expansion joints
Hydraulic Stem AquaStop (AquaBarrier) DV-320/40 (PVC) is a deformation inner dowel made of polyvinyl chloride, used to seal expansion joints in the construction of buried and underground structures, 320 (mm) – total width of the waterproofing key, 40 (mm) , filled with expanded polystyrene.
Waterbar (Water-key) DV-320/50 (PVC)
Usage: Sealing of internal expansion joints
Hydraulic Stem AquaStop (AquaBarrier) DV-320/50 (PVC) is a deformation inner dowel made of polyvinyl chloride, used for sealing expansion joints in the construction of buried and underground structures, 320 (mm) – total width of the waterproofing key, 50 (mm) , filled with expanded polystyrene.
Waterbar (Water-key) DV-400/50 (PVC)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (AquaBarrier) DV-400/50 (PVC) – internal deformation key made of polyvinyl chloride, used to seal expansion joints in the construction of buried and underground structures, 400 (mm) – total width of the waterproofing key, 50 (mm) width of the sealed expansion joint , filled with expanded polystyrene. This hydrostar is used for the construction of structures with increased strength, is made to order from 1 to 3 weeks, depending on the volume.
Waterbar (Water-key) DV-500/50 (PVC)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (Aqua Barrier) DV-500/50 (PVC) – the widest key (in the line of Aquastop DV) deformation internal of PVC, is used to seal expansion joints in the construction of buried and underground structures, 500 (mm) – the total width of the waterproofing key, 50 (mm) width of the sealed strain joint, filled with expanded polystyrene. This hydrostar is used for the construction of structures with increased strength, is made to order from 1 to 3 weeks, depending on the volume.
Waterbar (Water-key) DVS-240/20 (PVC)
Usage: Sealing of expansion joints at the interface of structures
Hydraulic Stem DVS 240/20 – according to the classification of internal deformation internal, is used for waterproofing of expansion joints in the construction of buried, underground structures with mating with existing building structures. 240 (mm) – the width of the waterproofing key, 20 – the width of the expansion joint.
Waterbar (Water-key) DVS-300/30 (PVC)
Usage: Sealing of expansion joints at the interface of structures
Hydraulic Stem 300/30 – according to the classification, the internal deformation is special, it is used for the waterproofing of expansion joints in the construction of buried, underground structures with the interface with existing building structures. 300 (mm) – the width of the waterproofing key, 30 – the width of the expansion joint.
Waterbar (Water-key) DVS-320/50 (PVC)
Usage: Sealing of expansion joints at the interface of structures
Hydraulic Stem 320/50 – according to the classification, the internal deformation internal, is used for the waterproofing of expansion joints in the construction of buried, underground structures in conjunction with existing building structures. 320 (mm) – the width of the waterproofing key, 50 – the width of the expansion joint.
Waterbar (Water-key) ET-170/12 (EPDM rubber)
Usage: Sealing of internal expansion joints
Hydrostick Aquastop (Aquabarrier) DV-170/12 – deformation inner cuff of EPDM rubber, used to seal expansion joints in the construction of buried, hydraulic and underground structures, 170 (mm) – total width of the waterproofing key, 12 (mm) filled with expanded polystyrene.
Waterbar DO 400 / 150-4 / 30 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick UP TO 400 / 150-4 / 30 Aquastop (AquaBarrier) – according to the classification of the key, waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this polyvinylchloride (PVC) water leaf is made, the width of the key is 400 mm, the width of the expansion joint – 150 mm, 4 – the number of anchors on the hydrostars, the height of the anchors – 30 mm.
Waterbar DO 500 / 50-8 / 30 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DO 500 / 50-8 / 30 Aquastop (AquaBarrier) – according to the classification of the key waterproofing deformable formwork, it is used for monolithic construction, it is installed on a horizontal prepared base, this polyvinylchloride (PVC) water key is executed, the width of the key is 500 mm, the width of the expansion joint – 50 mm, 8 – the number of anchors on the hydrostars, the height of the anchors – 30 mm.
Waterbar DO-CORNER-210/50-6/30 (PVC)
Usage: Sealing of expansion joints (formwork)
Waterstop Waterproof canopy DO-UGL-210 / 50-6 / 30 Aquastop (AquaBarrier) – according to the classification of the key waterproofing deformable formwork angular, used for monolithic construction, installed on the prepared (horizontal one side of the expansion joint and vertical on the other) hydro-key made of polyvinylchloride (PVC), the width of the key is 400 mm, the width of the expansion joint is 50 mm, 6 is the number of anchors for the hydrostars, the height of the anchors is 30 mm.
Waterbar DOI-270/25-6/25 (EPDM)
Usage: Sealing of expansion joints with increased requirements to structural reliability
Hydrofoil DPI-270 / 25-6 / 25 Aquastop (Aqua-Barrier) – waterproofing key for sealing shuttering expansion joints for buried, underground structures with increased reliability requirements, is used within the framework of injection systems. 270 (mm) – width of the waterproofing key, 25 (mm) – width of the expansion joint. 6 (pcs) – the number of anchors, 25 (mm) – the height of the anchors. It is made of EPDM rubber.
Waterbar DOM-320/30-4/30 (PVC)
Usage: Sealing formwork expansion joints
Waterstop DOM 320 / 30-4 / 30 (PVC) Aquastop (AquaBarrier) – waterproofing key deformable formwork for sealing joints, used in conjunction with waterproofing membranes (compatible with PVC membranes Logicroof T-SL, Logicbase, Decopran, Sikaplan, Plastfoil U (GEO)) for the construction of hydraulic, buried and other underground structures. 320 (mm) – the width of the hydrostar, 30 (mm) – the width of the expansion joint, 4 (pcs) – the number of anchors, 30 (mm) – the height of the anchors.
Waterbar DOM-320/40-4/30 (PVC)
Usage: Sealing formwork expansion joints
Waterstop DOM 320 / 40-4 / 30 (PVC) Aquastop (AquaBarrier) – waterproofing key deformation formwork for the sealing of expansion joints, used in conjunction with waterproofing membranes (compatible with PVC membranes Logicroof T-SL, Logicbase, Decopran, Sikaplan, Plastfoil U (GEO)) for the construction of hydraulic, buried and other underground structures. 320 (mm) – the width of the watermark, 40 (mm) – the width of the expansion joint, 4 (pcs) – the number of anchors, 30 (mm) – the height of the anchors.
Waterbar DOM-320/50-4/30 (PVC)
Usage: Sealing formwork expansion joints
Waterstop DOM 320 / 50-4 / 30 (PVC) Aquastop (AquaBarrier) – waterproofing key deformable formwork for the sealing of expansion joints, used in conjunction with waterproofing membranes (compatible with PVC membranes Logicroof T-SL, Logicbase, Decopran, Sikaplan, Plastfoil U (GEO)) for the construction of hydraulic, buried and other underground structures. 320 (mm) – the width of the hydrostar, 50 (mm) – the width of the expansion joint, 4 (pcs) – the number of anchors, 30 (mm) – the height of the anchors.
Waterbar DOS-CORNER-180/20-3/25 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DOS-UGL-180 / 20-3 / 25 (AquaBarrier) – according to the classification waterproofing key formwork special angular, width of the waterstarter 180 mm (from the side of the building structure), 135 mm on the side of the existing structure, 20 mm – width of the waterproofing expansion joint , 3 – number of anchors, 25 – height of anchors. This hydraulic key is used to seal the expansion joint at the junction with the existing structure.
Waterbar DOS-UGL-210/50-3/30 (PVC)
Usage: Sealing of expansion joints (formwork)
Hydrostick DOS-UGL-180 / 20-3 / 25 (AquaBarrier) – according to the classification waterproofing key formwork special angular, width of the waterstarter 180 mm (from the side of the building structure), 135 mm on the side of the existing structure, 20 mm – width of the waterproofing expansion joint , 3 – number of anchors, 25 – height of anchors. This hydraulic key is used to seal the expansion joint at the junction with the existing structure.
Waterbar DR-210/30 (PVC)
Usage: Restoring the sealing of expansion joints
Hydraulic Stem DR-210/30 Aquastop (Aqua-Barrier) – waterproofing key for sealing expansion joints in existing hydrotechnical structures. buried and underground structures. It is made of PVC. 210 (mm) – width of the waterproofing key, 30 (mm) – width of the expansion joint.
Waterbar DR-230/50 (PVC)
Usage: Restoring the sealing of expansion joints
Hydraulic dowel DR-230/50 Aquastop (Aqua Barrier) – waterproofing key for sealing expansion joints in existing hydrotechnical structures. buried and underground structures. It is made of PVC. 230 (mm) – the width of the waterproofing key, 50 (mm) – the width of the expansion joint.
Waterbar DR-250/50 (EPDM)
Usage: Restoring the sealing of expansion joints
Hydraulic Stem DR-250/50 Aquastop (Aqua-Barrier) – waterproofing key for sealing expansion joints in existing hydrotechnical structures. buried and underground structures. Produced from EPDM. 250 (mm) – width of the waterproofing key, 50 (mm) – width of the expansion joint.
Waterbar DVI-270/25 (EPDM)
Usage: Restoring the sealing of expansion joints
Waterstop DVI-270/25 Aquastop (Aqua-Barrier) – waterproofing key for sealing internal expansion joints for buried, underground structures with increased reliability requirements, is applied within the framework of the injection system “Aquasop Injecto”. 270 (mm) – width of the waterproofing key, 25 (mm) – width of the expansion joint. It is made of EPDM rubber.
Waterbar DZ 160/50-6/35 (PVC)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic Stem DZ 160 / 50-6 / 35 Aquastop (AquaBarrier), according to the classification of a waterproof dowel, designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 160 (mm) – height of hydrostar, 50 – width of expansion joint, 6 – number of anchors, last figure 35 – height of anchors.
Waterbar DZ-100/25-4/25 (EPDM)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic dowel DZ 100 / 25-4 / 25 Aquastop (AquaBarrier), according to the classification of a waterproof dowel, designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 100 (mm) – the height of the hydrostar, 25 – the width of the expansion joint, 4- the number of anchors, the last digit of 25 – the height of the anchors.
Waterbar DZ-130/25-6/25 (EPDM)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic Stem DZ-130 / 25-6 / 25 Aquastop (AquaBarrier) according to the classification of a waterproof dowel designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 130 (mm) – the height of the hydrostar, 25 – the width of the expansion joint, 6 – the number of anchors, the last digit of 25 – the height of the anchors.
Waterbar DZ-160/100-6/35 (PVC)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic Stem DZ-160 / 100-6 / 35 Aquastop (AquaBarrier), according to the classification of hydro-shield, designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 160 (mm) – the height of the hydrostar, 100 – the width of the expansion joint, 6 – the number of anchors, the last figure 35 – the height of the anchors.
Waterbar DZ-160/20-6/35 (PVC)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic Stem DZ-160 / 20-6 / 35 Aquastop (AquaBarrier), according to the classification of hydro-shield, designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 160 (mm) – the height of the hydrostar, 20 – the width of the expansion joint, 6 – the number of anchors, the last figure 35 – the height of the anchors.
Waterbar DZ-160/30-6/35 (PVC)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic Stem DZ-160 / 30-6 / 35 Aquastop (AquaBarrier), according to the classification of hydro-shield, designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 160 (mm) – the height of the hydrostar, 30 – the width of the expansion joint, 6 – the number of anchors, the last figure of 35 – the height of the anchors.
Waterbar DZ-160/40-6/35 (PVC)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic Stem DZ-160 / 40-6 / 35 Aquastop (AquaBarrier), according to the classification of hydro-shield, designed to seal expansion joints in the construction of buried, hydraulic structures, as well as to restore the tightness of expansion joints in existing structures. 160 (mm) – the height of the hydrostar, 30 – the width of the expansion joint, 6 – the number of anchors, the last figure of 35 – the height of the anchors.
Waterbar DZS-140/100-2/40 (PVC)
Usage: Restoring the sealing of expansion joints, Sealing of expansion joints at the interface of structures
Hydraulic dowel DZS-140 / 100-2 / 40 – according to the classification – waterproofing key deformation protective special, is used to seal expansion joints in the construction of buried and underground structures in conjunction with the already erected structures, as well as restoring the sealing of expansion joints. In the marking DZS-140 / 50-2 / 40, 100 – the height of the hydrostar (mm), 100 – the width of the expansion joint (mm), 2 – the number of anchors (pcs), 40 – the height of the anchors (mm).
Waterbar DZS-140/50-2/40 (PVC)
Usage: Restoring the sealing of expansion joints, Waterproofing of expansion joints
Hydraulic dowel DZS-140 / 50-2 / 40 – according to the classification – waterproofing key deformation protective special, is used to seal expansion joints in the construction of buried and underground structures in conjunction with the already erected structures. In the marking ДЗС-140 / 50-2 / 40, 140 – the height of the hydrostar (mm), 40 – the width of the expansion joint (mm), 2 – the number of anchors (pcs), 40 – the height of the anchors (mm).
Waterbar DZS-160/100-3/35 (PVC)
Usage: Restoring the sealing of expansion joints, Sealing of expansion joints at the interface of structures
Hydraulic dowel DZS-160 / 100-3 / 35 – according to the classification – waterproofing key deformation protective special, is used to seal expansion joints in the construction of buried and underground structures in conjunction with the already erected structures, as well as restoring the sealing of expansion joints. In the marking DZS-160 / 100-3 / 35, 160 – the height of the hydrostar (mm), 100 – the width of the expansion joint (mm), 3 – the number of anchors (pcs), 35 – the height of the anchors (mm).
Waterbar DZS-160/50-3/35 (PVC)
Usage: Restoring the sealing of expansion joints, Sealing of expansion joints at the interface of structures
Hydraulic dowel DZC-160 / 50-3 / 35 – according to the classification – waterproofing key deformation protective special, is used to seal expansion joints in the construction of buried and underground structures in conjunction with the already erected structures, as well as restoring the sealing of expansion joints. In the marking DZC-160 / 50-3 / 35, 160 – the height of the hydrostar (mm), 50 – the width of the expansion joint (mm), 3 – the number of anchors (pcs), 35 – the height of the anchors (mm).
Waterbar HO-220-4/25 (EPDM)
Usage: Sealing formwork expansion joints
Hydraulic Stem XO – 220-4 / 25 Aquastop (Aqua Barrier) – waterproofing key for sealing technological seams concreting formwork, used in monolithic new construction. 220 (mm) – width of the waterproofing key, 4 (pcs) – number of anchors, 25 (mm) – anchor height, EPDM material.
Waterbar HO-240-4/25 (PVC)
Usage: Sealing formwork expansion joints
Hydrostick HO-240-4 / 25 (PVC) Aquastop (AquaBarrier) – waterproofing key for sealing technological seams of concreting formwork, used in monolithic new construction. 240 (mm) – the width of the waterproofing key, 4 (pcs) – the number of anchors, 25 (mm) – the height of the anchors, the material of PVC production.
Waterbar HO-270-6/25 (EPDM)
Usage: Sealing formwork expansion joints
Hydrostick CW – 270-6 / 25 Aquastop (AquaBarrier) – waterproofing key for sealing technological seams of concreting formwork, used in monolithic new construction. 270 (mm) – width of the waterproofing key, 6 (pcs) – number of anchors, 25 (mm) – anchor height, EPDM material.
Waterbar HO-320-6/25 (PVC)
Usage: Sealing formwork expansion joints
Hydraulic Stem HO-320-6 / 25 (PVC) Aquastop (Aqua-Barrier) – waterproofing key for sealing technological grout concreting formwork, used in monolithic new construction. 320 (mm) – the width of the waterproofing key, 6 (pcs) – the number of anchors, 25 (mm) – the height of the anchors, the material of PVC manufacture.
Waterbar HO-400-6/30 (PVC)
Usage: Sealing formwork expansion joints
Hydrostick HO-400-6 / 30 (PVC) Aquastop (AquaBarrier) – waterproofing key for sealing technological grout concreting formwork, used in monolithic new construction. 400 (mm) – the width of the waterproofing key, 6 (pcs) – the number of anchors, 30 (mm) – the height of the anchors, PVC material.
Waterbar HO-500-8/30 (PVC)
Usage: Sealing formwork expansion joints
Hydraulic Stem XO-500-8 / 30 (PVC) Aquastop (Aqua-Barrier) – waterproofing key for sealing technological seams of concreting formwork, used in monolithic new construction. 500 (mm) – the width of the waterproofing key, 8 (pcs) – the number of anchors, 30 (mm) – the height of the anchors, the material of PVC production.
Waterbar HOM-200-3/20 (ПВХ)
Usage: Sealing process joints concreting together with PVC membranes
Waterstop Aquabarrier (Aquastop) HОМ-200-3 / 200 – waterproofing key for sealing technological grout concreting formwork, designed for use in conjunction with polymer membranes (full compatibility with membranes produced by Technonikol, Penokleks, Sika, Decopran). 200 (mm) – the width of the waterblock, 3 3 (pcs) – the number of anchors, 20 (mm) – the height of the anchors. Material for the manufacture of PVC.
Waterbar HOM-240-4/20 (PVC)
Usage: Sealing process joints concreting together with PVC membranes
Waterstop Aquabarrier (Aquastop) HОМ-240-4 / 200 – waterproofing key for sealing technological grout concreting formwork, designed for use in conjunction with polymer membranes (full compatibility with membranes produced by Technonikol, Penokleks, Sika, Decopran). 240 (mm) – width of hydrostar, 4 (pcs) – number of anchors, 20 (mm) – height of anchors. Material for the manufacture of PVC.
Waterbar HOM-320-4/20 (PVC)
Usage: Sealing process joints concreting together with PVC membranes
Waterstop Aquabarrier (Aquastop) HОМ-320-4 / 20 – waterproofing key for sealing technological grout concreting formwork, designed for use in conjunction with polymer membranes (full compatibility with membranes produced by Technonikol, Penokleks, Sika, Decopran). 320 (mm) – the width of the hydrostar, 4 (pcs) – the number of anchors, 20 (mm) – the height of the anchors. Material for the manufacture of PVC.
Waterbar HOM-320-4/30 (PVC)
Usage: Sealing process joints concreting together with PVC membranes
Waterstop Aquabarrier (Aquastop) HОМ-320-4 / 30 – waterproofing key for sealing technological grout concreting formwork, designed for use in conjunction with polymer membranes (full compatibility with membranes produced by Technonikol, Penokleks, Sika, Decopran). 320 (mm) – the width of the hydrostar, 4 (pcs) – the number of anchors, 30 (mm) – the height of the anchors. Material for the manufacture of PVC.
Waterbar HOM-320-4/30 (TPO/TEP)
Usage: Sealing process joints concreting together with PVC membranes
Waterstop Aquabarrier (Aquastope) HОМ-320-4 / 30 – waterproofing key for sealing technological grout concreting formwork, developed for use in conjunction with polymer membranes from TPO (fully compatible with TPO membranes manufactured by Sika, Carlisle). 320 (mm) – the width of the hydrostar, 4 (pcs) – the number of anchors, 30 (mm) – the height of the anchors. Material of TEP manufacturing.
Waterbar HV-200 (PVC)
Usage: Sealing process seams
Hydraulic Stem XV-200 Aquastop (Aqua-Barrier) – according to the classification accepted by the manufacturer – a waterproofing key for sealing technological joints of internal concreting, it is used for the erection of new buildings and underground structures. The width of the waterproofing key is 200 mm, the material is polyvinyl chloride (PVC).
Waterbar HV-220 (EPDM)
Usage: Sealing process seams
Hydraulic Stem ХВ-220 Aquastor (AquaBarrier) – according to the manufacturer’s classification – waterproofing key for sealing technological joints of internal concreting, it is used for the erection of new buildings and underground structures. The width of the waterproofing key is 222 mm, the material is EPDM rubber.
Waterbar HV-240 (PVC)
Usage: Sealing process seams
Hydraulic Stem ХВ-240 Aquastop (Aqua-Barrier) – according to the classification accepted by the manufacturer – a waterproofing dowel for sealing technological joints of internal concreting, is used for the erection of new buildings and underground structures. The width of the waterproofing key is 200 mm, the material is polyvinyl chloride (PVC).
Waterbar HV-250 (EPDM)
Usage: Sealing process seams
Hydraulic Stem ХВ-250 Aquastor (AquaBarrier) – according to the classification accepted by the manufacturer – a waterproofing dowel for sealing technological joints of internal concreting, it is used for the erection of new buildings and underground structures. The width of the waterproofing key is 250 mm, the material is EPDM rubber.
Waterbar HV-270 (EPDM)
Usage: Sealing process seams
Waterstop ХV-270 Aquastor (AquaBarrier) – according to the classification accepted by the manufacturer – a waterproofing key for sealing technological joints of internal concreting, it is used for the erection of new buildings and underground structures. The width of the waterproofing key is 272 mm, the material is EPDM rubber.
Waterbar HV-320 (PVC)
Usage: Sealing process seams
Hydraulic Stem ХВ-320 Aquastop (Aqua-Barrier) – according to the classification accepted by the manufacturer – a waterproofing dowel for sealing technological joints of internal concreting, is used for the erection of new buildings and underground structures. The width of the waterproofing key is 200 mm, the material is polyvinyl chloride (PVC).
Waterbar HV-400 (PVC)
Usage: Sealing process seams
Hydraulic Stem XV-400 Aquastop (Aqua-Barrier) – according to the classification accepted by the manufacturer – a waterproofing key for sealing technological joints of internal concreting, it is used for the erection of new buildings and underground structures. The width of the waterproofing key is 200 mm, the material is polyvinyl chloride (PVC).
Waterbar HV-500 (PVC)
Usage: Sealing process seams
Waterstop ХВ-500 Aquastop (Aqua-Barrier) – according to the classification accepted by the manufacturer – a waterproofing key for sealing technological joints of internal concreting, is used for the erection of new buildings and underground structures. The width of the waterproofing key is 500 mm, the material is polyvinyl chloride (PVC).
Waterbar HVN-120 2хØ4 (PVC)
Usage: Sealing process seams
Waterstop ХВН-120 2хØ4 Aquastop (Aqua Barrier) – waterproofing key for sealing technological seams of concreting, internal with channels for swelling profiles based on bentonite clay. 120 total width of the waterproofing key, 2 – number of channels for bentonite cords, Ø4 (mm) – diameter of bentonite cords.
Waterbar HVN-120 2хØ6 (PVC)
Usage: Sealing process seams
Waterstop ХВН-120 2хØ6 Aquastop (Aqua Barrier) – waterproofing key for sealing technological seams of concreting, internal with channels for swelling profiles based on bentonite clay. 120 total width of the waterproofing key, 2 – number of channels for bentonite cords, Ø6 (mm) – diameter of bentonite cords.
Waterbar HVN-150 1хØ4 (PVC)
Usage: Sealing process seams
Waterstop ХВН-150 1хØ4 Aquastop (Aqua Barrier) – waterproofing key for sealing technological seams of concreting, internal with channels for swelling profiles based on bentonite clay. 150 (mm) – total width of the waterproofing key, 2 – number of channels for bentonite cords, Ø4 (mm) – diameter of bentonite cords.
Waterbar HVN-150 1хØ6 (PVC)
Usage: Sealing process seams
Waterstop ХВН-150 1хØ6 Aquastop (Aqua Barrier) – waterproofing key for sealing technological seams of concreting, internal with channels for swelling profiles based on bentonite clay. 150 (mm) – total width of the waterproofing key, 2 – number of channels for bentonite cords, Ø6 (mm) – diameter of bentonite cords.
Waterbar HО-200-4/20 (PVC)
Usage: Sealing formwork expansion joints
Hydrostick HO – 270-6 / 25 Aquastop (AquaBarrier) – waterproofing key for sealing technological seams of concreting formwork, used in monolithic new construction. 270 (mm) – width of the waterproofing key, 6 (pcs) – number of anchors, 25 (mm) – anchor height, EPDM material.
Waterbar SVG-120 (EPDM)
Usage: “The wall in the ground”, Sealing of technological seams in the formwork
Hydrostick SVG-120 hydrostatic formwork inner, designed specifically for sealing technological seams concreting enclosing structures and various underground structures using the “Wall in the ground” method. Mounted in the end shields of the formwork Bauer. 120 (mm) – total width of the hydrostar, 23.4 (mm) inner diameter.
Waterbar SVG-120 (PVC)
Usage: “The wall in the ground”, Sealing of technological seams in the formwork
Hydrostick SVG-120 hydrostatic formwork inner, designed specifically for sealing technological seams concreting enclosing structures and various underground structures using the “Wall in the ground” method. Mounted in the end shields of the formwork Bauer. 120 (mm) – total width of the hydrostar, 23.4 (mm) inner diameter.