The claimed characteristics of the materials sold by us may differ only for the better
Materials for the device of expansion joints
In our assortment, various materials for the construction of expansion joints are widely represented (attention, the term “device” does not in this context mean full sealing or waterproofing of the expansion joint): special aluminum profiles “AquaBuilder” with different compensators, depending on the series used for joints in walls and floors of household premises (apartments), shopping centers, shops, warehouses, bridges, road surfaces and other purposes. In addition to deformation profiles, we also have: sealants for the deformation joints, hot mastics and waterproofing dowels for the device of internal expansion joints.
Profile for a deformation joint universal operated bill DVA-50
Usage: The device of expansion joints, The device of expansion joints with extreme loads
Deformational profile Dva-50 (Dilatation device Dva-50 Akvabarer) is used for the construction of expansion joints on highly stressed surfaces (the deformation seam withstands a pressure of 22 MPa, which allows it to be used for seaming at military ranges, as well as for warehouses with loaders on steel wheels and other rooms with extremely high loads). Also, using the deformation profiles, the DWA allows to ensure the unstressed passage of wheeled vehicles.
Deformation profile Compensator Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C 22 DVA–50 / 050 ВА1–110 15 15 40 50 118 232 Profile for the deformation seam versatile waybill double DSHS-0 (DSHS-0-UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
Deformational profile of DPS-0 / DFS-0-UGL (Dilatation device Aquabarrier) is intended for the device of expansion joints with a width of 30 to 200 mm on walls, office, administrative and other buildings, as well as for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. The installation of the seam – a bill of lading, mounted directly on the finish coat.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-0 / 060 C2–055 4 20 30 60 137 137 – DSHS-0-UGL / 060 99 99 – DSHS-0 / 100 C2–100 16 50 40 100 177 177 – DSHS-0-UGL / 100 139 139 – DSHS-0 / 110 C3–105 12 60 50 110 187 187 – DSHS-0-UGL / 110 149 149 – DSHS-0 / 130 C3–125 23 80 70 130 207 207 – DSHS-0-UGL / 130 169 169 – DSHS-0 / 150 C2–140 38 100 80 150 227 227 – DSHS-0-UGL / 150 189 189 – DSHS-0 / 160 C3–155 26 110 90 160 237 237 – DSHS-0-UGL / 160 199 199 – DSHS-0 / 200 C2–195 44 130 100 200 277 277 – DSHS-0-UGL / 200 239 239 – Profile for the deformation weld of the wall-mounted DGK-0 / DGK-0 UGL
Usage: The device of angular expansion joints, The device of expansion joints, The device of expansion joints in walls, The device of strain joints without loads
Deformation profile DGC-0 (Dilatation device AquaBarrier) – an overhead deformational sealer compensator, which consists of two aluminum straps with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the settable joint is from 20 to 125 mm. Available in two versions – angular and straight.
Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DGK-0 G2-018 1 1 2 20 72 – DGK–0–UGL / 025 G5-018 2 10 5 25 51 – DGK–0 / 030 G2-028 1 1 2 30 82 – DGK–0–UGL / 025 G5-028 4 12 8 35 61 – DGK–0 / 040 G2-038 2 2 4 40 92 – DGK–0–UGL / 025 G5-038 6 22 12 45 71 – DGK–0 / 050 G2-048 2 2 4 50 102 – DGK–0–UGL / 025 G5-048 8 26 16 55 81 – DGK–0 / 070 G5-068 12 38 24 70 122 – DGK–0–UGL / 025 75 101 – DGK–0 / 090 G5-088 16 50 32 90 142 – DGK–0–UGL / 025 95 121 – DGK–0 / 120 G5-188 22 62 44 120 172 – DGK–0–UGL / 025 125 151 – Profile for the expansion joint decorative patch PSA angular
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The PSA strain profile is used exclusively for decorative purposes, it is made of solid aluminum (without compensator) for joints in shopping centers, administrative and office buildings, and apartments. Mounting of the PSA deformation profile with the width of the seam 30, 50 mm can be carried out with the help of a bezanker method (due to a special latch fixing the bar inside the seam). The profiles PSA-100, 150 and 180 are assembled using anchors (an anchor in the kit).
Deformation profile Displacements, mm Dimensions, mm Compression Stretching Shift A B C PSA angular–040 9 9 – 30-33 40 40 PSA angular–050 19 19 – 30-35 50 50 PSA angular–075 20/30 20/31 – 45-50 75 75 PSA angular–110 50 50 – 60-85 110 110 PSA angular–130 70 70 – 70-90 130 130 Profile for the expansion joint of decorative patch PSA
Usage: The device of expansion joints, The device of strain joints without loads
The PSA strain profile is used exclusively for decorative purposes, it is made of solid aluminum (without compensator) for joints in shopping centers, administrative and office buildings, and apartments. Mounting of the PSA deformation profile with the width of the seam 30, 50 mm can be carried out with the help of a bezanker method (due to a special latch fixing the bar inside the seam). The profiles PSA-100, 150 and 180 are assembled using anchors (an anchor in the kit).
Deformation profile Displacements, mm Dimensions, mm Compression Stretching Shift A B C PSA-050 10 10 30 50 50 PSA-075 15 15 50 75 75 PSA-100 40/33 40/33 40-50 100 100 PSA-150 50 50 50-100 150 150 PSA-180 60 60 60-100 180 180 Profile for the expansion joint of the wall DGK-15
Usage: The device of expansion joints, The device of expansion joints in walls, The device of strain joints without loads
Deformation profile DGK-15 (Dilatation device Aquabarrier) – a mortgage (under the tile or any other finishing coating with a thickness of 15 mm), a deformable sealing expansion joint consisting of two aluminum bars with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the deformable joint is from 18 to 135 mm. Available in two versions – angular and straight.
Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/C DGK-15 / 018 Г2-018 1 1 2 18 24/92 – DGK–15–UGL / 035 Г5-018 2 10 5 35 22/72 – DGK–15 / 028 Г2-028 1 1 2 28 34/102 – DGK–15–UGL / 045 Г5-028 4 12 8 45 32/82 – DGK–15 / 038 Г2-038 2 2 4 38 44/112 – DGK–15–UGL / 055 Г5-038 6 22 12 55 42/92 – DGK–15 / 048 Г2-048 2 2 4 48 54/122 – DGK–15–UGL / 065 Г5-048 8 26 16 65 52/102 – DGK–15 / 068 Г5-068 12 38 24 68 74/142 – DGK–15–UGL / 85 85 72/122 – DGK–15 / 088 Г5-088 16 50 32 88 94/162 – DGK–15–UGL / 105 105 92/142 – DGK–2 / 118 Г5-188 22 62 44 118 124/192 – DGK–15–UGL / 135 135 122/172 – Profile for the expansion joint of universal insert TPM-11 | TPM-14
Usage: The device of expansion joints, The device of expansion joints in floors, The device of strain joints with medium loads
Deformation profile of TPM is used for the device of narrow expansion joints, 7/12 mm wide. The TPM profile can withstand the loads produced by passenger cars, as well as pedestrian loads of high intensity. Installation of TPA profiles – a mortgage, is installed under the finish coat with a total thickness of 12, 15, or 20 mm, depending on the modification of the seam. The feature of the TPM seam is the complete sealing of the expansion joint when used in conjunction with the sealant (the profile provides special grooves for sealing the sealant). Installation of a mortgage for a finish coat with a thickness of at least 11/14 mm, depending on the modification of the seam.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C TPM-11/007 PM1-007 2 2 1 7 9 64 0,6 TPM-14/012 2 2 1 12 9 64 0,6 Profile for the expansion joint universal insertion double TPA-12 | TPA-15 | TPA-20
Usage: The device of expansion joints, The device of expansion joints in floors, The device of strain joints with medium loads
Deformation profile TPA is used for the device of narrow deformation seams, width of 9 mm. The profile of the TPA can withstand the loads produced by passenger cars, as well as pedestrian loads of high intensity. Installation of TPA profiles – a mortgage, is installed under the finish coat with a total thickness of 12, 15, or 20 mm, depending on the modification of the seam. A rigid compensator completely prevents vertical movement of the joint during operation.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Сжатие Stretching Shift A B C TPA-12 / 010 PA1-008 9 12 – 9 12 62 0,6 TPA-15 / 010 9 12 – 9 12 62 0,6 TPA-20 / 010 9 12 – 9 12 62 0,6 Profile for the expansion joint universal single bill DSHS-0 (DSHS-UHL-0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The deformation profile of the DShS-0 / DShS-0-UGL (Dilatation device Aquabarrier) is designed for the device of expansion joints with a width of 30 to 100 mm on walls, office, administrative and other buildings, and also for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. The installation of the seam – a bill of lading, mounted directly on the finish coat.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-0 / 030 C1–027 2 10 10 30 107 107 – DSHS-0-UGL / 030 69 69 – DSHS-0 / 050 C1–048 8 40 40 50 128 128 – DSHS-0-UGL / 050 90 90 – DSHS-0 / 075 C1–069 19 50 50 75 149 149 – DSHS-0-UGL / 075 111 111 – DSHS-0 / 100 C1–097 2 70 70 100 177 177 – DSHS-0-UGL / 100 139 139 – Profile for the expansion joint universal used mortgage DSHL-15 (DSHL-15 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of Dshm-15 (Dshm-15 UGL) (Dilatation device Aquastop / Akvabarer DShM-15 (Dshm-15 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) with a load of 0.2 MPa, it is possible to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 15 to 40 mm in Depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the GSD 15 – a mortgage (for the finish coating from 15 mm).
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/C DSHM-15/015 DSHM-15-UGL/025 В0-032 2 2 4 15/25 35/126 0,2 В1-032 5 5 4 35/80 В2-032 1 2 4 35/80 DSHM-15/020 DSHM-15-UGL/030 В0-038 5 5 6 20/30 40/131 0,2 В1-038 6 6 6 40/85 В2-038 2 2 6 40/85 DSHM-15/030 DSHM-15-UGL/040 В0-049 9 9 8 30/40 50/141 0,2 В1-049 10 10 8 50/95 В2-049 2 3 8 50/95 Profile for universal expansion joint mortgage double DSHS-16 (DSHS-16 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The deformation profile of the DShS-16 (DShS-16-UGL) (Dilatation device Aquabarrier) is designed for the device of expansion joints with a width of 50 to 210 mm on walls, office, administrative and other buildings, as well as for joints on unexploited floors. The deformation profiles of the DPS series are not intended for operation. Installation of the seam – a mortgage, is installed under the finish coat with a total thickness of not more than 16 mm.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-16 / 050 C2–055 4 20 30 50 70
65 133 – DSHS-16 UGL / 070 65 112 – DSHS-16 / 090 C2–100 16 50 40 90 110
105 173 – DSHS-16 UGL / 110105 105 161 – DSHS-16 / 100 C3–105 12 60 50 100 120
116 183 – DSHS-16 UGL / 120 115 161 – DSHS-16 / 120 C3–125 23 80 70 120 140
136 203 – DSHS-16 UGL / 140 135 171 – DSHS-16 / 130 C2–140 38 100 80 130 150
145 213 – DSHS-16 UGL / 150 145 191 – DSHS-16 / 150 C3–155 26 110 90 150 170
165 233 – DSHS-16 UGL / 170 165 211 – DSHS-16 / 190 C2–195 44 130 100 190 210
205 273 – DSHS-16 UGL / 170 205 252 – Profile for universal expansion joint operated by the DPP
Usage: Sealing device for expansion joints, The device of expansion joints, The device of expansion joints with extreme loads
Deformational overhead profile DPP – the most popular, interesting and universal solution for the device of expansion joints in parking lots. Its advantages are:
- High seam separation (20-55 mm), without the need for grooving to the exact size
- Full sealing of the seam
- Stitching on the finish coat
- Possibility of painting in any color according to RAL
- The compensator is made of thermoplastic elastomer (TEP), resistant to chemically active media, and also preserving operating properties over a wide temperature range.
Deformation profile DPV Aquabarrier (as well as other deformation aluminum profiles) is made of aluminum in accordance with GOST 8617-81 t GOST 22233-2001, due to this the material has high strength, chemical and corrosion resistance, durability and environmental safety.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DPV-8/050 ПН–83–АА 10 30 70 20-55 250 2,1 ПН–81–СО ПН–81–СН Profile for universal expansion joint operated mortgage DSHN-UGL
Usage: Sealing device for expansion joints, The device of expansion joints, The device of expansion joints with extreme loads
The deformation profile of DSHN-UGL (Dilatation device Akvastop DSHN-UGL) angular is designed for the device of expansion joints in the construction of the floor with a load of up to 2.0 MPa, it is also used to seal joints in prefabricated metal structures. The compensator is made of EPDM rubber, resistant to ultraviolet radiation and also to high and low operating temperatures, while still protecting the ingress of moisture and dust into the sealed space. Installation of DCHN-UGL – consignment note, it is possible as an overhead installation in an existing seam with a finished finish, and a mortgage.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DSHN-UGL / 085 Н1–067 7 13 8 85 84 199 2 DSHN-UGL / 115 Н1–098 25 15 30 115 115 142 2 DSHN-UGL / 145 Н1–130 20 20 40 145 146 230 2 Profile for universal movement joint mortgage single DSHS-16 (DSHS-UGL-16)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The deformation profile of DShS-16 (DShS-16-UGL) (Dilatation device Akvabarer) is designed for the device of expansion joints with width from 20 to 110 mm on walls, ceilings of office, administrative and other buildings, as well as for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. Installation of the seam – the mortgage for the finish coat (under the plaster) is not less than 16 mm.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-16 / 020 C1–027 2 10 30 20 35 102 – DSHS-16-UGL / 040 40 35 81 – DSHS-16 / 040 C1–048 8 40 40 40 55 122 – DSHS-16-UGL / 060 60 55 101 – DSHS-16 / 065 C1–069 19 50 50 65 80 147 – DSHS-16-UGL / 085 85 80 125 – DSHS-16 / 090 C1–097 22 70 70 90 105 172 – DSHS-16-UGL / 110 110 105 151 – Profile for universal operated expansion joint bill DSHA.-T 0 (DSHA.-T 0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DASHA.-T-0 (DSCA.-T-0) (Dilatation device Aquastop / Aquabarrier DHA.-T-0 (DASHA.-T-0 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. including asphalt).
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.Т–0 / 085 А.Т1–075 10 10 15 85 253 0,7 DSHA.Т–0–УГЛ / 085 168 Profile for universal operated expansion joint bill DSHA.TS-0 (DSHA.TS-UHL-0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHA.TS-0 (Dilatation device AQUASTOP DSHA.TS-0-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: 245 (mm) / 0,9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, loaders, etc.), 285 (mm) / 0.5 MPa – (cargo vehicles up to 20t, passenger transport, etc.), 335 (mm) / 0.3 MPa – low level of loading (passenger cars, high pedestrian load). Mounted on top of the finish coat.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.TS–0 / 245 А.ТS1–235 50 50 28 245 417 0,9 DSHA.TS–0–UGL / 245 332 DSHA.TS–0 / 285 А.ТS1–275 50 50 34 285 457 0,5 DSHA.TS–0–UGL / 285 372 DSHA.TS–0 / 335 А.ТS1–325 50 50 40 335 507 0,3 DSHA.TS–0–UGL / 335 422 Profile for universal operated expansion joint bill DSHA.TS-20 (DSHA.TS-UHL-20)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DASHA.TS-20 (Dilatation device AQUASTOP DASHA.TS-20-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 20 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–20 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-20-UGL / 230 245/302 DSHA.TS–20 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-20-UGL / 270 285/342 DSHA.TS–20 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-20-UGL / 320 335/392 Profile for universal operated expansion joint bill DSHKA-0 (DSHKA-UGL-0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile of DSHKA-0 (Dilatation device Aquastop DSHKA-0-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DSHKA-0 is carried out by the overhead method directly on the finish coat.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B=C DSHKA-0/050 КЗ-044 15 35 10 50 220 1,8 DSHKA-0-UGL/055 55 140 DSHKA-0/060 КЗ-054 20 45 12 60 230 1,8 DSHKA-0-UGL/065 65 150 DSHKA-0/070 КЗ-064 30 75 15 70 240 1,8 DSHKA-0-UGL/075 75 160 DSHKA-0/080 КЗ-074 40 80 20 80 250 1,8 DSHKA-0-UGL/085 85 170 DSHKA-0/100 КЗ-094 45 80 25 100 270 1,5 DSHKA-0-UGL/105 105 190 Profile for universal operated expansion joint bill DSHKA-16 (DSHKA-UGL-16)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHKA-16 (Dilatation device Aquastop DSHKA-16-UGL) is used for the device of highly exploited expansion joints, including coping with loads produced by any vehicles and forklifts (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DSHKA-16 is carried out by a mortar method for the final coating with a total thickness of 16 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B/C DSHKA-16/050 КЗ-044 15 35 10 50 50/200 1,8 DSHKA-UGL-16/055 55 55/130 DSHKA-16/060 КЗ-054 20 45 12 60 60/210 1,8 DSHKA-UGL-16/065 65 65/140 DSHKA-16/070 КЗ-064 30 75 15 70 70/220 1,8 DSHKA-UGL-16/075 75 75/150 DSHKA-16/080 КЗ-074 40 80 20 80 80/230 1,8 DSHKA-UGL-16/085 85 80/160 DSHKA-16/100 КЗ-094 45 80 25 100 100/250 1,5 DSHKA-UGL-16/105 105 105/180 Profile for universal operated expansion joint bill DSHKA-50 (DSHKA-UGL-50)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHKA-50 (Dilatation device Aquastop DSHKA-50-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (except for forklifts on solid tires and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DSHKA-50 is carried out by a mortar method for the final coating with a total thickness of 50 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B/C DSHKA-50/020 КЗ-044 15 35 10 20 50/165 1.20 DSHKA-50-UGL/040 40 55/112 DSHKA-50/030 КЗ-054 20 45 12 30 60/175 1.20 DSHKA-50-UGL/050 50 65/122 DSHKA-50/040 КЗ-064 30 75 15 40 70/185 1.20 DSHKA-50-UGL/060 60 75/132 DSHKA-50/050 КЗ-074 40 80 20 50 80/195 1.20 DSHKA-50-UGL/070 70 80/142 DSHKA-50/070 КЗ-094 45 80 25 70 100/215 0.90 DSHKA-50-UGL/090 90 105/162 Profile for universal operated expansion joint bill DVA-30
Usage: The device of expansion joints, The device of expansion joints with extreme loads
Deformational profile DVA-30 (Dilatation device Dva-30 Aqua-barrier) is used for the construction of expansion joints on highly stressed surfaces (the deformation seam withstands a pressure of 22 MPa, which allows it to be used for joints at military ranges, as well as for warehouses with loaders on steel wheels and other rooms with extremely high loads). Also, using the deformation profiles, the DWA allows to ensure the unstressed passage of wheeled vehicles.
Deformation profile Compensator Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C 22 DVA–30 / 050 ВА1–110 15 15 40 50 118 232 Profile for universal operated expansion joint bill of FAS-DSHKA
Usage: Arrangement of facade deformation seams, Deformation joints with low loads, The device of expansion joints
Deformation profile of DSHKA-FAS (Dilatation device Aquastop DSHKA-FAS-UGL) is used for the construction of facade deformation seams (from other seams it is distinguished by another type of aluminum bars, and also by mounting method). At the device of a deformation facade seam withstands significant loads (0.30 MPa).
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B=C DSHKA-FAS/070 КЗ-064 30 75 15 70 70 0,3 DSHKA-FAS/080 КЗ-074 40 80 20 80 80 0,3 DSHKA-FAS/100 КЗ-094 45 80 25 100 100 0,3 Profile for universal operated expansion joint mortgage DPSH-30 (DPSH-UGL-30)
Usage: Sealing device for expansion joints, The device of expansion joints, The device of expansion joints in underground parking lots, The device of strain joints with a high load
Deformational profile of DPSH (Dilatation device Aquastop DPSh) – designed for the construction of expansion joints in conjunction with PVC waterproofing membranes on flat roofs, bridges, underground and above ground parking lots and other structures where full waterproofing of the coating in conjunction with the deformation seam is required. Deformation profile DPHS withstands high loads. in t.ch. cargo motor transport on pneumatic tires with a carrying capacity of up to 40 tons, as well as any types of loaders, roaches, etc.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DPSH-30 / 050 P1–102 5 30 30 50 105 212 3 DPSH-UGL-30 / 050 P2–076 5 30 30 50 78 130 3 Profile for universal operated expansion joint mortgage DPSH-50 (DPSH-UGL-50)
Usage: Sealing device for expansion joints, The device of expansion joints, The device of expansion joints at conjugation with PVC membranes, The device of expansion joints in underground parking lots
Deformation profile DPSH-50 (DPSh-50-UGL). (DPSh-50-UGL)) – designed for the construction of expansion joints in conjunction with waterproof PVC-membranes on flat roofs, bridges, underground and above-ground parking lots and other structures where full waterproofing of the coating is required in conjugation with a deformation seam. Deformation profile DPHS withstands high loads. in t.ch. cargo motor transport on pneumatic tires with a carrying capacity of up to 40 tons, as well as any types of loaders, roaches, etc.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DPSH–50 / 050 П1–102 5 30 30 50 105 212 3 DPSH–50–UGL / 050 П2–076 5 30 30 50 78 130 3 Profile for universal operated expansion joint mortgage DSHA.-T-30 (DSHA.-T-30)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.Т–30 / 085 А.Т1–075 10 10 15 85 83/195 0,7 DSHA.Т–30–UGL / 085 83/139 Profile for universal operated expansion joint mortgage DSHA.-T-50 (DSHA.-T-50)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DZHA.-T-50 (DZHA.-T-50) (Dilatation device Akvastop / Akvabarer DZHA.-T-50 (DZHA.-T-50 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo vehicles with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint of 85 mm, it is also possible to produce this deformation profile in the angular version. from 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Сжатие Растяжение Сдвиг А В/С DSHA.Т–50 / 055 А.Т1–075 10 10 15 85 70
83/195 0,7 DSHA.Т–50–UGL / 070 83/139 Profile for universal operated expansion joint mortgage DSHA.-T-70 (DSHA.-T-70)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DZHA.-T-70 (DSCA.-T-70) (Dilatation device Aquastop / Aqua Barrier DSCA.-T-70 (DZHA.-T-70 UGL) – high-strength deformation profile for the construction of seams with high loads, allows travel cargo transport with a carrying capacity of up to 7 tons, as well as any light vehicles and minibuses, a width of the designed expansion joint from 55 to 70 mm, it is also possible to produce this deformation profile in the angular version. coating thickness of 70 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.Т–70 / 055 А.Т1–075 10 10 15 55 70
83/195 0,7 DSHA.Т–70–UGL / 070 83/139 Profile for universal operated expansion joint mortgage DSHA.TS 100 (DSHA.T UHL-100)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DSHA.TS-100 (Dilatation device AQUASTOP DSHA.TS-100-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 100 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS-100 А.ТС1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-100-UGL / 230 245/302 DSHA.TS-100 / 250 А.ТС1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-100-UGL / 270 285/342 DSHA.TS-100 / 300 А.ТС1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-100-UGL / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-30 (DSHA.TS-UGL-30).
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DZHA.TS-30 (Dilatation device AQUASTOP DASHA.TS-30-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–30 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-UGL-30 / 230 245/302 DSHA.TS–30 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-UGL-30 / 270 285/342 DSHA.TS–30 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-UGL-30 / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-50 (DSHA.T-UGL-50)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSCA.TS-50 (Dilatation device AQUASTOP DASHA.TS-50-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). It is mounted to the finish coat with a thickness of 30 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS–50 / 210 А.ТS1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-UGL-50 / 230 245/302 DSHA.TS–50 / 250 А.ТS1–275 50 50 34 250 270
283/397 0,5 DSHA.T-UGL-50 / 270 285/342 DSHA.TS–50 / 300 А.ТS1–325 50 50 40 300 320
333/347 0,3 DSHA.T-UGL-50 / 320 335/392 Profile for universal operated expansion joint mortgage DSHA.TS-70 (DSHA.T-UGL-70)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHA.TS-70 (Dilatation device AQUASTOP DSHA.TS-70-UGL) is used for the device of highly exploited expansion joints, depending on the width of the def. seam: (210, 230 mm) / 0.9 MPa – high degree of operation (trucks up to 35 tons, large passenger transport, loaders, etc.), (250, 270 mm) / 0.5 MPa – average degree of operation (trucks up to 20t, passenger transport, etc.), (300, 320 mm) / 0.3 MPa – low load (passenger cars, high pedestrian load). Mounted to the finish coat with a thickness of 70 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA.TS-70 / 210 А.ТС1–235 50 50 28 210 230
243/357 0,9 DSHA.TS-70-UGL / 230 245/302 DSHA.TS-70 / 250 А.ТС1–275 50 50 34 250 270
283/397 0,5 DSHA.TS-70-UGL / 270 285/342 DSHA.TS-70 / 300 А.ТС1–325 50 50 40 300 320
333/347 0,3 DSHA.TS-70-UGL / 320 335/392 Profile for universal operated expansion joint mortgage DSHKA-75 (DSHKA-UGL-75)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DSHKA-75 (Dilatation device Aquastop DSHKA-75-UGL) is used for the device of highly exploited expansion joints, including coping with the loads produced by any vehicles and loaders (with the exception of forklifts on cast-iron and tire tires). The compensator is made of thermoplastic elastomer (TEP). Installation DSHKA-75 is carried out by a mortar way under a finish covering with the general thickness from 75 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B/C DSHKA-75/020 КЗ-044 15 35 10 20 50/165 0.90 DSHKA-UGL-75/040 40 55/112 DSHKA-75/030 КЗ-054 20 45 12 30 60/1750 0.90 DSHKA-UGL-75/050 50 65/122 DSHKA-75/040 КЗ-064 30 75 15 40 70/185 0.90 DSHKA-UGL-75/060 60 75/132 DSHKA-75/050 КЗ-074 40 80 20 50 80/195 0.90 DSHKA-UGL-75/070 70 80/142 DSHKA-75/070 КЗ-094 45 80 25 70 100/215 0.70 DSHKA-UGL-75/090 90 105/162 Profile for universal operated expansion joint mortgage DSHN-50 (DSHN-UGL-50)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
The deformation profile of DShN-50 / DShN-50-UGL (Dilatation device Akvastop DShN-50 / DShN-50-UGL) is used to seal expansion joints on surfaces with a high degree of operation (maximum load of 3.0 MPa), withstands any type of motor vehicle, including including load-carrying capacity up to 40 tons, as well as any kinds of loaders. The compensator is made of EPDM rubber, resistant to ultraviolet radiation and also to high and low operating temperatures, while still protecting the ingress of moisture and dust into the sealed space. Installation ДШН-50 – mortgage, is mounted under the finish coat with a thickness of up to 50 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression Stretching Shift А В С DSHN-50 / 040 Н1–067 7 13 8 40 84 199 3 DSHN-UGL-50 / 060 60 84 142 DSHN-50 / 070 Н1–098 25 15 30 70 115 230 2,5 DSHN-UGL-50 / 090 90 115 173 DSHN-50 / 100 Н1–130 20 20 40 100 146 261 2 DSHN-UGL-50 / 120 120 146 204 The profile for a universal expansion joint is exploited by the DSHA-50 mortgage (DSHA-50 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
The deformation profile DSHA-50 (DSHA UHL-50) (dilatation device Aquastop / Akvabarer DSHA-50 (DSHA UHL-50) – the device is designed for expansion joints in areas of high pedestrian operational load (malls, shops, etc.) compensator is made of profiled aluminum durable width large enough expansion joint 25 (maximum Sustained load 0.35 MPa) to 195 mm (minimum Carrying force of 0.03 MPa), depending on the modification, also possible to produce this deformation profile in the angular Installation of profile DZHA-50 – mortgage, mounted in front of the finish coat, with a total thickness of 50 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA–50 / 025 А1–030 5 5 6 25 38
50/165 0,35 DSHA–50–UGL / 038 50/108 DSHA–50 / 055 А1–050 15 14 10 55 68
80/195 0,25 DSHA–50–UGL / 068 80/138 DSHA–50 / 085 А1–070 22 30 13 75 98
110/225 0,1 DSHA–50–UGL / 098 110/168 DSHA–50 / 110 А2–130 13 26 20 110 125
135/250 0,05 DSHA–50–UGL / 125 135/195 DSHA–50 / 150 А2–170 30 26 25 150 165
175/290 0,05 DSHA–50–UGL / 165 175/235 DSHA–50 / 180 А2–200 30 26 30 180 195
205/320 0,03 DSHA–50–UGL / 195 205/265 The profile for the expansion joint is a universal joint operated DSHA.T-UGL.2
Usage: The device of expansion joints, The device of expansion joints with extreme loads
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA.T-UGL.2 А.Т1–075 10 10 15 85 85 5 The profile for the expansion joint is a universal joint operated DSHB-50 (ДSHV-50 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile ДШВ-50 (ДШВ-50 УГЛ) (Dilatation device Akvastop / Akvabarer ДШВ-50 (ДШВ-50 УГЛ) – is developed for the device of deformation joints in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum load capacity of 0.15 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.The installation of the profile of the DSHV is a mortgage, it is installed under the space of a tile adhesive with a total thickness of 50 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHV-50/025 DSHV-50-UGL / 030 В0–032 2 2 3 25 30
35/125 35/80
0,15 В1–032 5 5 3 В2–032 1 2 3 DSHV-50/030 DSHV-50-UGL / 035 В0–038 5 5 4 30 35
40/130 40/85
0,15 В1–038 6 6 4 В2–038 2 2 4 DSHV-50 / 040 DSHV-50-UGL / 045 В0–049 9 9 6 40 45
50/140 50/95
0,10 В1–049 10 10 6 В2–049 2 3 6 DSHV-50 /050 DSHV-50-UGL / 055 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-50 / 060 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHV-50-UGL / 065 The profile for the expansion joint is a universal joint operated DSHV-20 (DSHV-20 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile ДШВ-20 (ДШВ-20 УГЛ) (Dilatation device Akvastop / Akvabarer ДШВ-20 (ДШВ-20 УГЛ) – it is developed for the device of deformation joints in zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.The installation of the profile of the DSHV is a mortgage, it is installed under the space of a tile adhesive with a total thickness of 20 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHV-20/025 DSHV-20-UGL / 030 В0–032 2 2 3 25 30
35/125 35/80
0,2 В1–032 5 5 3 В2–032 1 2 3 DSHV-20/030 DSHV-20-UGL / 035 В0–038 5 5 4 30 35
40/130 40/85
0,18 В1–038 6 6 4 В2–038 2 2 4 DSHV-20 / 040 DSHV-20-UGL / 045 В0–049 9 9 6 40 45
50/140 50/95
0,14 В1–049 10 10 6 В2–049 2 3 6 DSHV-20 /050 DSHV-20-UGL / 055 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-20 / 060 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHV-20-UGL / 065 The profile for the expansion joint is a universal joint-operated DZHL-50 (Dshl-50 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile Dshl-50 (Dshl-50 UGL) (Dilatation device Akvastop / Akvabarer Dshl-50 (Dshl-50 UGL) – designed for the construction of expansion joints with a high floor design (from 50 mm), deformation profile of the LSL according to the declared load (0.05 MPa) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 15 to 35 mm depending on the modification, of the given deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/С DSHL-15/005 L1–017 2 4 10 15 20/110 0.05 DSHL-15-UGL/015 20/65 DSHL-15/010 L1–021 3 40 20 25 25/115 0.05 DSHL-15-UGL/ 2025/70 25/70 DSHL-15/015 L1–027 5 4 15 30 30/120 0.03 DSHL-15-UGL/ 025 30/75 DSHL-15/025 L1–037 15 5 20 40 40/130 – DSHL-15-UGL/ 035 40/85 The profile for the expansion joint is a universal operated bill DSHKA-30 (DSHKA-30-UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with a high load
Deformation profile DShKA-30 (Dilatation device Aquastop DShKA-30-UGL) is used for the device of highly exploited expansion joints, including coping with loads produced by any vehicles and loaders (except for forklifts on solid and tire tires). The compensator is made of thermoplastic elastomer (TEP). The installation of the DZHA-30 is carried out by a mortar method for the final coating with a total thickness of 30 mm.
Deformation profile Compensator Compensator view Movement, mm Dimensions, mm Load, MPa Compression, mm Stretching, mm Shift, mm А B/C DSHKA-30/020 КЗ-044 15 35 10 20 50/165 1.20 DSHKA-30-UGL/040 40 55/112 DSHKA-30/030 КЗ-054 20 45 12 30 60/175 1.20 DSHKA-30-UGL/050 50 65/122 DSHKA-30/040 КЗ-064 30 75 15 40 70/185 1.20 DSHKA-30-UGL/060 60 75/132 DSHKA-30/050 КЗ-074 40 80 20 50 80/195 1.20 DSHKA-30-UGL/070 70 80/142 DSHKA-30/070 КЗ-094 45 80 25 70 100/215 0.90 DSHKA-30-UGL/090 90 105/162 The profile for the expansion joint is a universal operated bill DSHV-0 (DSLL-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSHV-0 (DSHV-0 UGL) (Dilatation device Akvastop / Akvabarer DSHV-0 (DSHV-0 UGL) – it is developed for the device of deformation seams in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels .The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 35 to 70 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHV-0 / 035 DSHV-0-UGL / 035 В0–032 2 2 3 35 110 72 0,2 В1–032 5 5 3 В2–032 1 2 3 DSHV-0 / 040 DSHV-0-UGL / 040 В0–038 5 5 4 40 115 77 0,18 В1–038 6 6 4 В2–038 2 2 4 DSHV-0 / 050 DSHV-0-UGL / 050 В0–049 9 9 6 50 125 87 0,14 В1–049 10 10 6 В2–049 2 3 6 DSHV-0 / 060 DSHV-0-UGL / 060 В0–060 12 12 8 60 135 97 0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-0 / 070 В0–068 14 14 10 70 145 107 0,06 DSHV-0-UGL / 070 The profile for the expansion joint is a universal operated bill DSV-15 (DShV-15 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DSHV-15 (DSHV-15 UGL) (Dilatation device Aquastop / Aquabarrier DSHV-15 (DSHV-15 UGL) – is developed for the device of deformation joints in the zones of the increased pedestrian operational loading (shopping centers, shops, etc.) the maximum withstand load of 0.2 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the profile of the DSHV – a mortgage, is mounted under the space of the tile adhesive.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHV-15 / 035 DSHV-15-UGL / 035 В0–032 2 2 3 25 30
35/125 35/80
0,2 В1–032 5 5 3 В2–032 1 2 3 DSHV-15 / 040 DSHV-15-UGL / 040 В0–038 5 5 4 30 35
40/130 40/85
0,18 В1–038 6 6 4 В2–038 2 2 4 DSHV-15 / 050 DSHV-15-UGL / 050 В0–049 9 9 6 40 45
50/140 50/95
0,14 В1–049 10 10 6 В2–049 2 3 6 DSHV-15 / 060 DSHV-15-UGL / 060 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-15 / 070 В0–068 14 14 10 60 65
65/160 65/115
0,06 DSHV-15-UGL / 070 The profile for the expansion joint is a universal operated bill of lading DSHA-0 (DSHA-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformation profile DZHA-0 (DZHA-0 UGL) (Dila-Akvastop / Akvabarer DSCA-0 (DZHA-0 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformation joint to be adjusted from 50 to 205 mm depending on the modification, it is also possible to produce this deformation profile in the angular version. cover.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA–0 / 050 А1–030 5 5 6 50 220 0,35 DSHA–0–UGL / 050 135 DSHA–0 / 080 А1–050 15 14 10 80 250 0,25 DSHA–0–UGL / 080 165 DSHA–0 / 110 А1–070 22 30 13 110 280 0,1 DSHA–0–UGL / 110 195 DSHA–0 / 135 А2–130 13 26 20 135 305 0,05 DSHA–0–UGL / 135 220 DSHA–0 / 175 А2–170 30 26 25 175 345 0,05 DSHA–0–UGL / 175 260 DSHA–0 / 205 А2–200 30 26 30 205 375 0,03 DSHA–0–UGL / 205 290 The profile for the expansion joint is a universal operated consignment note DSHL-0 (DSHL-0 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of DZHL-0 / Dschl-0 UGL (Dilatation device Akvastop / Akvabarer Dshl-0 / Dschl-0 UGL) – designed for sealing deformation seams for finishing the floor, walls and ceilings, deformation profile of the LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP), the width of the expansion joint is from 20 to 40 mm, depending on the modification, it is also possible to release this deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DSHL-0/020 L1–017 2 4 10 20 120 0.05 DSHL-0-UGL / 020 70 DSHL-0/025 L1–021 3 40 20 25 125 0.05 DSHL-0-UGL / 025 75 DSHL-0/030 L1–027 5 4 15 30 130 0.05 DSHL-0-UGL / 030 80 DSHL-0/040 L1–037 15 5 20 40 140 0.05 DSHL-0-UGL / 040 90 The profile for the expansion joint is universal, which is operated by the DSHV-35 mortar (DSHV-35 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile DSHV-35 (DSHV-35 УГЛ) (Dilatation device Akvastop / Akvabarer DSHV-35 (DSHV-35 UGL) – is developed for the device of deformation joints in the zones of the raised pedestrian operational loading (shopping centers, shops, etc.), the maximum load-bearing capacity of 0.18 MPa allows us to withstand not only a high degree of pedestrian activity, but also the passage of easy storage equipment on pneumatic and rubber wheels.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint from 25 to 65 mm depending on the modification, it is also possible to produce this deformation profile in the angular version.Installation of the profile of the DSHV – a mortgage, is mounted under the space of tile adhesive with a total thickness of 35 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHV-35/025 DSHV-35-UGL / 030 В0–032 2 2 3 25 30
35/125 35/80
0,18 В1–032 5 5 3 В2–032 1 2 3 DSHV-35/030 DSHV-35-UGL / 035 В0–038 5 5 4 30 35
40/130 40/85
0,15 В1–038 6 6 4 В2–038 2 2 4 DSHV-35 / 040 DSHV-35-UGL / 045 В0–049 9 9 6 40 45
50/140 50/95
0,15 В1–049 10 10 6 В2–049 2 3 6 DSHV-35 /050 DSHV-35-UGL / 055 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHV-35 / 060 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHV-35-UGL / 065 The profile for the universal expansion joint is exploited by the DSHA-15 mortar (DSHA-15 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Distortion profile DZHA-15 (DZHA-15 UGL) (Dilatation device AQUASTOP / AquaBarrier DZHA-15 (DZHA-15 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (maximum withheld load of 0.35 MPa) to 205 (the minimum withstand load 0.25 MPa) mm depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-15 – mortgage, mounted in front of the finish coat, with a total thickness of 15 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В=С DSHA–15 / 025 А1–030 5 5 6 50 220 0,35 DSHA–15–UGL / 038 135 DSHA–15 / 055 А1–050 15 14 10 80 250 0,25 DSHA–15–UGL / 068 165 DSHA–15 / 085 А1–070 22 30 13 110 280 0,1 DSHA–15–UGL / 098 195 DSHA–15 / 110 А2–130 13 26 20 135 305 0,05 DSHA–15–UGL / 125 220 DSHA–15 / 150 А2–170 30 26 25 175 345 0,05 DSHA–15–UGL / 165 260 DSHA–15 / 180 А2–200 30 26 30 205 375 0,03 DSHA–15–UGL / 195 290 The profile for the universal expansion joint is exploited by the DSHA-75 mortgage (DSHA-75 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile DZHA-75 (DZHA-75 UGL) (Dila-75 dilatation device AquaStop / Aquabarrier DZHA-75 (DZHA-75 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) the compensator is made of profiled long-lived aluminum, the width of the deformed seam from 25 (the maximum withstand load is 0.35 MPa) to 195 mm (the minimum withheld load is 0.03 MPa) depending on the modification, it is also possible to release this deformation profile into the corner Mounting profile DZHA-75 – mortgage, mounted in front of the finish coat, with a total thickness of 75 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHA–75 / 025 А1–030 5 5 6 25 38
50/165 0,35 DSHA–75–UGL / 038 50/108 DSHA–75 / 055 А1–050 15 14 10 55 68
80/195 0,25 DSHA–75–UGL / 068 80/138 DSHA–75 / 085 А1–070 22 30 13 75 98
110/225 0,1 DSHA–75–UGL / 098 110/168 DSHA–75 / 110 А2–130 13 26 20 110 125
135/250 0,05 DSHA–75–UGL / 125 135/195 DSHA–75 / 150 А2–170 30 26 25 150 165
175/290 0,05 DSHA–75–UGL / 165 175/235 DSHA–75 / 180 А2–200 30 26 30 180 195
205/320 0,03 DSHA–75–UGL / 195 205/265 The profile for the universal expansion joint is exploited by the Dshl-30 mortar (DSHL-30 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of Dschl-30 / Dschl-30 UGL (Dilatation device Akvastop / Akvabarer Dshl-30 / Dschl-30 UGL) – designed for the device of expansion joints with high floor construction (from 30 mm), deformational profile of LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 5 to 35 mm depending on the modification, it is also possible to release this deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/С DSHL-15/005 Л1–017 2 4 10 15 20/110 0.05 DSHL-15-UGL/015 20/65 DSHL-15/010 Л1–021 3 40 20 25 25/115 0.05 DSHL-15-UGL/ 2025/70 25/70 DSHL-15/015 Л1–027 5 4 15 30 30/120 0.03 DSHL-15-UGL/ 025 30/75 DSHL-15/025 Л1–037 15 5 20 40 40/130 – DSHL-15-UGL/ 035 40/85 The profile for the universal expansion joint is maintained by the DSHV-0 mortgage (DSHV-0 UGL)
Usage: Устройство деформационных швов, Устройство деформационных швов с низкими нагрузками, Устройство угловых деформационных швов
Deformation profile of DSCH-0 (DSCH-0 UGL) (Dilatation device AQUASTOP / AQUABARER D-SHO-0 (DZHV-0 UGL) – designed for the construction of expansion joints in areas with increased pedestrian operational load (shopping centers, shops, etc.) The expansion joint is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 25 to 65 mm depending on the modification, it is also possible to release the deformed seams insulating profile angularly by mounting profile DSHO-0 -. invoice, mounted directly on the final coating.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHO-0/035 DSHO–0–UGL / 035 В0–032 2 2 3 25 30
35/125 35/80
0,15 В1–032 5 5 3 В2–032 1 2 3 DSHO-0/040 DSHO–0–UGL / 040 В0–038 5 5 4 30 35
40/130 40/85
0,15 В1–038 6 6 4 В2–038 2 2 4 DSHO-0/050 DSHO–0–UGL / 050 В0–049 9 9 6 40 45
50/140 50/95
0,10 В1–049 10 10 6 В2–049 2 3 6 DSHO-0/060 DSHO–0–UGL / 060 В0–060 12 12 8 50 55
60/150 60/105
0,1 В1–060 15 15 8 В2–060 3 3 8 DSHO-0/070 В0–068 14 14 10 60 65
65/160 65/115
0,05 DSHO–0–UGL / 070 The profile for the universal expansion joint is operated by the DSHO-24 mortar (DSHO-24 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints with medium loads
Deformation profile of DCHO-24 (DSPO-24 UGL) (Dilatation device AQUASTOP / AQUABARER DOSHO-24 (DSSO-24 UGL) – designed for the construction of expansion joints in areas of increased pedestrian operational load (shopping centers, shops, etc.) In contrast to the expansion joints of the Dosho series, it is also designed for the movement of light vehicles of low intensity.The compensator is made of thermoplastic elastomer (TEP) and can easily be replaced in case of wear, the width of the expansion joint is from 25 to 65 mm depending on the modification, mation profile in the angular performance Installation Profile DSHO-24 -. the mortgage, is mounted in the adhesive base for the tiles of at least 24 mm in height.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А В/С DSHO-24/030 DSHO–24–UGL / 030 В0–032 2 2 3 30 35/156 35/95
0,25 В1–032 5 5 3 В2–032 1 2 3 DSHO-24/040 DSHO–24–UGL / 040 В0–038 5 5 4 30 35
44/161 44/100
0,25 В1–038 6 6 4 В2–038 2 2 4 DSHO-24/050 DSHO–24–UGL / 050 В0–049 9 9 6 40 45
54/171 54/110
0,20 В1–049 10 10 6 В2–049 2 3 6 DSHO-24/060 DSHO–24–UGL / 060 В0–060 12 12 8 50 55
64/181 64/120
0,20 В1–060 15 15 8 В2–060 3 3 8 DSHO-24/070 В0–068 14 14 10 60 65
74/191 74/130
0,15 DSHO–24–UGL / 070 The profile for the universal joint deformed joint Dshl-15 (Dshl-15 UGL)
Usage: Deformation joints with low loads, The device of angular expansion joints, The device of expansion joints
Deformational profile of DZHL-0 / Dschl-0 UGL (Dilatation device Akvastop / Akvabarer Dshl-0 / Dschl-0 UGL) – designed for sealing deformation seams for finishing the floor, walls and ceilings, deformation profile of the LSL according to the declared load (0.05 MPa ) can withstand minimal pedestrian loads, but it is not recommended to use it in commercial premises. The compensator is made of thermoplastic elastomer (TEP), the width of the expansion joint is from 20 to 40 mm, depending on the modification, it is also possible to release this deformation profile in the angular modification.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DSHL-15/005 Л1–017 2 4 10 20 120 0.05 DSHL-15-UGL/015 70 DSHL-15/010 Л1–021 3 40 20 25 125 0.05 DSHL-15-UGL / 20 75 DSHL-15/015 Л1–027 5 4 15 30 130 0.03 DSHL-15-UGL / 025 80 DSHL-15/025 Л1–037 15 5 20 40 140 – DSHL-15-UGL / 035 90