The claimed characteristics of the materials sold by us may differ only for the better
Materials for the installation and strengthening of river banks and canals
In addition to the classical solutions for strengthening coastal river and canal channels such as matt and box-type gabions and volumetric geogrids, we also offer methods and materials that are relatively new in Russia and can be used on rivers and canals with any erosion basis. This is Typed SF56 thermo-bonded geotextile, and also SF65 and SF77 for conditions with increased loads, which perform not only a reinforcing but also a filtering function with low silt values.
Gabion cylindrical
Usage: Armorranean mounds, Buildings in seismically active zones, Buildings on unstable soils, Ground retaining walls, Ponds and reservoirs, Reinforcing the roadbed, Reservoir, Sea coast to the bay, Shores of rivers and canals
- Cylindrical gabions are used to base the bottoms of ponds, ponds, reservoirs and other water bodies before installing box and mattress-box type gabones in cases where the relief of the installation is not suitable for installing box gabions without preliminary preparation. At us it is possible to get gabions of standard sizes from 3х2х0.17м to 6х2х0.5м with a diameter of knitted galvanized wire from 2.4 to 3.7 mm, PVC-spraying, any color on RAL and number of diaphragms under the order is possible.
Gabions of box type
Usage: Anti-erosion measures, Antilock dykes, Armorranean mounds, Buildings in seismically active zones, Buildings on unstable soils, Dams, Foundations of fences, Ground retaining walls, Landscaping, Ponds and reservoirs, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Sea coast to the bay, Shores of rivers and canals
- Box-type gabions are designed to strengthen the soil, slopes and banks in various building structures, as well as in the decorative design of the landscape. We can buy gabions of sizes from 1x1x0.5m to 6x2x2m with a diameter of knitted galvanized wire from 2.4 to 3.7 mm, PVC-spraying, any RAL color and the number of diaphragms on request are possible.
Size, length x width x height Number of diaphragms, pcs. Ø of wire, mm Type of coating Mesh cell size Weight of one mesh construction, kg 1,5 х 0,5 х 0,5 1 2,4 Zinc 6*8 6,1 1 2,7 Zinc 8*10 6,6 1 3 Zinc 8*10 8,8 1,5 х 1 х 0,5 1 2,7 Zinc 8*10 10,2 1 3 Zinc 8*10 12,5 1 2,7/3,7 Zinc + Polymer 8*10 11,6 1,5 х 1 х 1-2,7 1 2,7 Zinc 8*10 15 1 3 Zinc 8*10 18,5 1 2,7/3,7 Zinc + Polymer 8*10 16,75 2 х 1 х 0,5 1 2,7 Zinc 8*10 13 1 2,4 Zinc 6*8 13,5 1 3 Zinc 8*10 16,35 1 2,7/3,7 Zinc + Polymer 8*10 14,5 1 2,4/3,4 Zinc + Polymer 6*8 20,5 2 х 1 х 1 1 2,7 Zinc 8*10 17,5 1 2,4 Zinc 6*8 18,5 1 3 Zinc 8*10 25,1 1 2,7/3,7 Zinc + Polymer 8*10 19,7 3 х 1 х 0,5 2 2,7 Zinc 8*10 19 2 2,4 Zinc 6*8 18,8 2 3 Zinc 8*10 22,6 2 2,7/3,7 Zinc + Polymer 8*10 21,3 3 х 1 х 1 2 2,7 Zinc 8*10 25,8 2 3 Zinc 8*10 32,4 2 2,7/3,7 Zinc + Polymer 8*10 28,5 4 х 1 х 0,5 3 2,7 Zinc 8*10 22,9 3 3 Zinc 8*10 29,75 3 2,7/3,7 Zinc + Polymer 8*10 27,5 3 2,4 Zinc 6*8 23,7 4 х 1 х 1 3 2,7 Zinc 8*10 34,3 3 3 Zinc 8*10 42,5 3 2,7/3,7 Zinc + Polymer 8*10 36,53 5 х 1 х 1 4 2,7 Zinc 8*10 40,9 4 3 Zinc 8*10 53,6 4 2,4 Zinc 6*8 41,5 Gabions of mattress type
Usage: Anti-erosion measures, Antilock dykes, Armorranean mounds, Buildings in seismically active zones, Buildings on unstable soils, Dams, Foundations of fences, Ground retaining walls, Landscaping, Ponds and reservoirs, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Sea coast to the bay, Shores of rivers and canals
- Fabric-type mattresses are used to reinforce shallow slopes, ponds, as well as to construct a base for installing box-type gabions and fixing unstable surfaces. At us it is possible to get gabions of standard sizes from 3х2х0.17м to 6х2х0.5м with a diameter of knitted galvanized wire from 2.4 to 3.7 mm, PVC-spraying, any color on RAL and number of diaphragms under the order is possible.
Mattress-mattress type 3 х 2 х 0,17 2 2,7 Zinc 8*10 24,5 2 2,7/3,7 Zinc + Polymer 8*10 26 2 2,4 Zinc 6*8 26,7 2 2,4/3,4 Zinc + Polymer 6*8 26,69 3 х 2 х 0,23 2 2,7 Zinc 8*10 26 2 2,7/3,7 Zinc + Polymer 8*10 30,6 2 2,4 Zinc 6*8 27 3 х 2 х 0,3 2 2,7 Zinc 8*10 27,5 2 3 Zinc 8*10 36,5 2 2,7/3,7 Zinc + Polymer 8*10 32,5 2 2,4 Zinc 6*8 27,5 3 х 2 х 0,5 2 2,7 Zinc 8*10 30,9 2 2,4 Zinc 6*8 31,6 2 3 Zinc 8*10 39 2 2,7/3,7 Zinc + Polymer 8*10 34,9 4 х 2 х 0,17 3 2,7 О3 Ц 8*10 32 3 2,7/3,7 Zinc + Polymer 8*10 35 3 2,4 Zinc 6*8 31,9 4 х 2 х 0,23 3 2,7 Zinc 8*10 34 3 2,7/3,7 Zinc + Polymer 8*10 38 3 2,4 Zinc 6*8 33,6 3 2,7 Zinc 6*8 46,43 4 х 2 х 0,3 3 2,7 Zinc 8*10 35 3 2,7/3,7 Zinc + Polymer 8*10 41 3 2,4 Zinc 6*8 36,4 4 х 2 х 0,5 3 2,7 Zinc 8*10 40,3 3 2,7/3,7 Zinc + Polymer 8*10 44 3 2,4 Zinc 6*8 41,41 5 х 2 х 0,17 4 2,7 Zinc 8*10 37,5 4 2,7/3,7 Zinc + Polymer 8*10 43 4 2,4 Zinc 6*8 44 5 х 2 х 0,23 4 2,7 Zinc 8*10 41,3 5 х 2 х 0,3 4 2,7 Zinc 8*10 42 4 2,7/3,7 Zinc + Polymer 8*10 47,9 4 2,4 Zinc 6*8 45 5 х 2 х 0,5 4 2,7 Zinc 8*10 50,9 4 3 Zinc 8*10 66 4 2,7/3,7 Zinc + Polymer 8*10 53,8 6 х 2 х 017 5 2,7 Zinc 8*10 45,2 5 2,4 Zinc 6*8 45,3 6 х 2 х 0,23 5 2,7 Zinc 8*10 46,8 5 2,7/3,7 Zinc + Polymer 8*10 60,2 6 х 2 х 0,3 5 2,7 Zinc 8*10 51,1 5 2,7/3,7 Zinc + Polymer 8*10 60 6 х 2 х 0,5 5 2,7 Zinc 8*10 60 5 3 Zinc 8*10 75,5 5 2,7/3,7 Zinc + Polymer 8*10 65 Gabions with reinforcing panel
Usage: Anti-erosion measures, Antilock dykes, Armorranean mounds, Buildings in seismically active zones, Buildings on unstable soils, Dams, Foundations of fences, Ground retaining walls, Landscaping, Ponds and reservoirs, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Sea coast to the bay, Shores of rivers and canals
- Gabions with a reinforcing panel on box-type gabions are used in cases where it is also necessary to strengthen the slope from erosion and provide anti-landslide measures (instead of an anti-erosion geomat). At us it is possible to get gabions of standard sizes from 3х2х0.17м to 6х2х0.5м with a diameter of knitted galvanized wire from 2.4 to 3.7 mm, PVC-spraying, any color on RAL and number of diaphragms under the order is possible.
With reinforcing panel
2 х 2 х 1 х 0,5 1 2,7 Zinc 8*10 18,5 1 2,7/3,7 Zinc + Polymer 8*10 21,5 2 х 2 х 1 х 1 1 2,7 Zinc 8*10 24,1 1 2,7/3,7 Zinc + Polymer 8*10 26,4 3 х 2 х 1 х 0,5 1 2,7 Zinc 8*10 21,5 1 2,7/3,7 Zinc + Polymer 8*10 23,9 3 х 2 х 1 х 1 1 2,7 Zinc 8*10 28,7 1 2,7/3,7 Zinc + Polymer 8*10 30 4 х 2 х 1 х 0,5 1 2,7 Zinc 8*10 24,5 1 2,7/3,7 Zinc + Polymer 8*10 27,2 4 х 2 х 1 х 1 1 2,7 Zinc 8*10 30,03 1 2,7/3,7 Zinc + Polymer 8*10 33 5 х 2 х 1 х 0,5 1 2,7 Zinc 8*10 28,8 1 2,7/3,7 Zinc + Polymer 8*10 32 5 х 2 х 1 х 1 1 2,7 Zinc 8*10 33,03 1 2,7/3,7 Zinc + Polymer 8*10 36,6 6 х 2 х 1 х 0,5 1 2,7 Zinc 8*10 30,7 1 2,7/3,7 Zinc + Polymer 8*10 34,4 6 х 2 х 1 х 1 1 2,7 Zinc 8*10 36,03 1 2,7/3,7 Zinc + Polymer 8*10 39,3 Thermo-embedded geotextile Ekospan Geo 110 (PP)
Usage: Artificial gardening, Artificial lawn on sports grounds, Construction of motorways, Drainage layer, Garden paths, Landscaping, Natural lawn on sports grounds, Scaffolding, Shores of rivers and canals, The device of drainage systems, Underground parking lots
- Thermo-embedded geo-textiles Ecospan Geo 110, when compared with the popular analogue for technical characteristics, is between Typar SF32 and Typar SF37, there are no fundamental differences between them. However, its cost is on average 20% cheaper than Typar. Ecospan Geo – geotextile produced by the famous Hex company for the products of “Izospan”. Unlike Ecospan Geo 90, the main purpose of this material is drainage (not filtration) under load.
Indicators Geotextiles thermosetted Экоспан Гео 90 Geotextiles thermosetted Экоспан Гео 90 Structure nonwoven fabric nonwoven fabric Colour White/gray White/gray Presence of additives – – Surface density, g / m2 90 110 Deviation from the nominal surface density,% ±10% ±10% Nominal tensile strength (along / across) 6,5/4,7 кН/м 7,0/5,9 кН/м Deviation from the nominal (in tensile strength) ±2 кН/м ±2 кН/м Elongation at rupture, in length / width,%, not more than – – Water permeability, l / m2 26 25 Resistance to UV irradiation,%, not less than – – Width, m 1;2 1;2 Length in roll, m 5;10;25 5;10;25 Volumetric geogrid with perforation
Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ODM 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at
– 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56
Volumetric geogrid without perforation
Usage: Anti-erosion measures, Armorranean mounds, Construction of retaining walls, Construction of winter roads, Fixing of slopes of cones of railway tracks, Ground retaining walls, Reinforcement of slopes, Reinforcing the roadbed, Replacement of deck flooring, Reservoir, Sea coast to the bay, Seismic protection of air passages of oil and gas pipelines, Seismic protection of slopes, Shores of rivers and canals, Strengthening of roadsides, Strengthening of slopes, Strengthening of surface drainage structures, Waterproof and capillary interlayers
A three-dimensional volume geogrid can be produced with a cell height of 76, 100, 150, 200 mm, depending on the design and customer requirements. Chemical resistance from 0.5 to 14 Рн allows using it in any soil types, the cell size can be released depending on the customer’s need: 165х165 mm, 210х210mm, 250х250 mm, 300х300 mm. In agreement with the customer, other sizes may be produced.
Index Value
Test method Cell height, mm ± 5 76, 100, 150, 200
TU 2246-002-56910145-2011
Thickness of tape, ± 10% 1,5
GOST 17035
Tensile strength at tension, kN / m, not less than 30
GOST 11262 и
ОДМ 218.5.006-2010Relative elongation at yield point,%, not more than 15
GOST 11262
Strength of the seam, kN / m, not less than 25
GOST 11262
Shock toughness at – 60 °С
Without Destruction
GOST 4647
Flexibility on the bar at – 20 °С
– 60 °С
absence of cracks and delaminations on the front side of the material
GOST 2678
Resistance to repeated freezing and thawing (frost resistance),%
not less95
ODM 218.5.006-2010
Chemical resistance, pH 0,5-14
TU 2246-002-56910145-2011
Coefficient of damageability,%, not more than 2
ODM 218.5.006-2010
Module size * Height Cell size, mm Linear size, m Module area, m² Module weight, kg 76
165х165
2,33х6,99
16,3
20
100
210х210
2,40х9,00
21,6
27
150
250х250
2,47х10,59
26,1
41
200
300х300
2,54х12,72
32,3
56