The claimed characteristics of the materials sold by us may differ only for the better
Mastics waterproofing universal MBU “Econom” ZKM
Price on request
- Description
- Additional information
- Questions & Answers
Description
Mastics roofing waterproofing – finished mastic cold application on the basis of bitumen, in the composition of mastic there are technological additives: artificial rubber, mineral fillers, organic solvent, providing high adhesion to virtually any substrate. In the composition of this mastic there are also stabilizers, which protect against UV exposure.
Used for mastic roofing (using fiberglass, roll materials, and without), as well as for the local repair of flat and pitched roofs. It differs from the more expensive waterproofing roofing mastics of cold application with a lesser degree of modification (as a result – a shorter service life), as well as the lack of painting the bucket.
It is also recommended to use this mastic for the device of waterproofing foundations, cellars and other objects buried in the ground and in contact with a moist environment.
Additional information
| Strength of adhesion to concrete, MPa | 0.6 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.9 |
| Strength of adhesion between roll materials, MPa | 0.3 |
| Прочность сцепления рулонный материал-бетон, МПа | 0.4 |
| Shear strength of adhesive joint, kN / m | 4 |
| Conditional strength, MPa | 1 |
| Relative elongation at break,% | 500 |
| Water absorption for 24 hours, by weight | 0.4 |
| Массовая доля нелетучих веществ, % | 50 |
| Heat resistance, С | 110 |
| Temperature of flexibility on the bar, C | -35 |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Read MoreQuick viewWeldable waterproofing material Technoelast HPP + 100 / -25 4.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreQuick viewWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
Price on requestUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
-
You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreQuick viewWelding waterproofing material Technoelast EPP + 100 / -25 5.0
Price on requestUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Read MoreQuick viewWeldable waterproofing material Technoelast Alpha EPP -20 / + 100
Price on requestUsage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
-
You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreQuick viewSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Price on requestUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
Связанные материалы
-
You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreQuick viewWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
Price on requestUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
-
You've just added this product to the cart:
Weldable waterproofing material Technoelast Alpha EPP -20 / + 100
Read MoreQuick viewWeldable waterproofing material Technoelast Alpha EPP -20 / + 100
Price on requestUsage: Construction of open-cut tunnels, Landfills, Parking of cars, Protection against radon and methane, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of foundations
Technoelast Alpha EPP is a waterproofing material with additional protection against the penetration of the Radon and Methane gases into the construction structure (protection is provided by a metal foil fastened to the base with a polyester mesh). Mounted by fusing.
-
Mastic water-emulsion №33
Price on requestUsage: Mastic roofs, Waterproofing of flat roofs, Waterproofing of foundations
Waterproofing water-based mastic cold application Tekhnonikol No. 33 – modified latex and polymer modifiers, does not contain organic solvents. The peculiarity of this mastic is the absence of solvents, which makes it possible to use it in internal premises, it can be applied either mechanically (with the help of a sprayer) or manually (with a roller and brush).
-
Mastics roofing hot MBG
Price on requestUsage: Inversion roofs, Waterproofing (anticorrosive protection) of steel structures, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Roofing mastics of hot application MBG is designed for effective repair and the construction of flat roofs, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material. It is an inexpensive equivalent of the popular Tekhnonikol mastic “Eureka”
-
You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreQuick viewSurfacing waterproofing material Technoelast Thermo EPP
Price on requestUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
