The claimed characteristics of the materials sold by us may differ only for the better
Mastic roofing hot № 41 (Eureka)
18.90 $ Approximate price per briquette 30 kg
- Description
- Additional information
- Questions & Answers
Description
Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics due to the greater liquidity of the material (a higher percentage of filling micropores on the waterproofing surface), as well as mastic can be used to seal cracks in asphalt and concrete screeds.
Before the production of works it is necessary to warm up the mastic to a temperature of 160-180 degrees, it is recommended to apply the mastic with a spatula, brush or roller
Additional information
| Strength of adhesion to concrete, MPa | 0.2 |
|---|---|
| Прочность сцепления с металлом, МПа | 0.25 |
| Strength of adhesion between roll materials, MPa | 0.15 |
| Прочность сцепления рулонный материал-бетон, МПа | 0.15 |
| Shear strength of adhesive joint, kN / m | 4 |
| Conditional strength, MPa | 0.2 |
| Relative elongation at break,% | 1100 |
| Water absorption for 24 hours, by weight | 1 |
| Массовая доля нелетучих веществ, % | – |
| Heat resistance, С | +130 |
| Temperature of flexibility on the bar, C | – |
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost C +140 6.0 EMP
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost C +140 6.0 EMP
313.00 $ Approximate price per square meterUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of foundations, Waterproofing of road surfaces
TechnoelastMost C – APP-modified roll waterproofing material, designed for the construction of a waterproofing layer, as well as the protective structure of bridge structures that protects the bridge structures on steel orthotropic slabs, also the procedure for its application provides waterproofing of the reinforced concrete slab of the carriageway, in cases where hot asphalt laying is carried out directly on waterproofing (roads, bridge structures, multi-level parking in the open air). TechnoelastMost C can withstand the temperature of laying cast mixtures of asphalt concrete up to 240 degrees.
- You've just added this product to the cart:
Weldable waterproofing material Technoelast HPP + 100 / -25 4.0
Read MoreБыстрый просмотрWeldable waterproofing material Technoelast HPP + 100 / -25 4.0
1.77 $ Approximate price per square meterUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
- You've just added this product to the cart:
Welding waterproofing material Technoelast EPP + 100 / -25 5.0
Read MoreБыстрый просмотрWelding waterproofing material Technoelast EPP + 100 / -25 5.0
2.77 $ Approximate price per square meterUsage: “The wall in the ground”, Concrete preparation, Inversion roofs, Materials for the arrangement of parking places, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast EPP – SBS modified waterproofing material, the application schedule of which is very wide – the device of waterproofing of flat roofs (including exploited ones), the device of waterproofing of the foundation (it is recommended to use the material in two layers, however in the case of Technoelast, in many cases, one layer is enough) and also carrying out waterproofing works on base plates and other purposes.
- You've just added this product to the cart:
Weldable waterproofing material TechnoelastMost B +100 6.0 EMF
Read MoreБыстрый просмотрWeldable waterproofing material TechnoelastMost B +100 6.0 EMF
4.30 $ Approximate price per square meterUsage: Materials for the arrangement of parking places, Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
TehnoelastMost B – SBS-modified roll waterproofing material, designed specifically for the waterproofing of reinforced concrete slabs on the roadway of bridge structures and waterproofing of other building structures (including flat operated, inversion and ballast roofs, foundations, etc.). Covering from above – sand, from below – an adhesive film.
- You've just added this product to the cart:
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Read MoreБыстрый просмотрSurfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
3.79 $ Approximate price per square meterUsage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Связанные материалы
- You've just added this product to the cart:
Self-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
Read MoreБыстрый просмотрSelf-adhesive waterproofing material Technoelast Prime EMM -25 / + 100 3.0
2.56 $ Approximate price per square meterUsage: Inversion roofs, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Prime EMM is used for the installation of various waterproofing systems in foundations, roofs and other building structures, where the installation technique requires a fireless installation method. The material is mounted by gluing to a surface pre-treated with bitumen-polymer mastic.
- You've just added this product to the cart:
Welded waterproofing material BilastMost +110 6.0 EPP
Read MoreБыстрый просмотрWelded waterproofing material BilastMost +110 6.0 EPP
Approximate price per meterUsage: Parking of cars, Stylobates loaded, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of road surfaces
BilastMost EPP is an inexpensive substitute for popular materials TechnoelastMost B, Mostoizol 110, designed specifically for the construction of a waterproofing layer for multi-level open parking, bridges, etc. But also the material due to high weighting (6.0 kg / m2) can be used for the construction of a waterproofing layer of the foundation in one layer (instead of the classic two EPG + EPP, recommended by most design organizations).
- You've just added this product to the cart:
PVC Geomembrane Plastfoil U 2.0 mm Penoplex
Read MoreБыстрый просмотрPVC Geomembrane Plastfoil U 2.0 mm Penoplex
7.01 $ Approximate middle wholesale price per square meterUsage: “The wall in the ground”, Concrete preparation, Ponds and reservoirs, Protection against radon and methane, Reservoirs for water, Stylobates loaded, Under the foundation, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
- Plastfoil U 2.0 (GEO) is a non-reinforced PVC membrane with a thickness of 2 mm (a thickness of 1.5 mm is possible), used for waterproofing various underground structures.
- You've just added this product to the cart:
Surfacing waterproofing material Technoelast Thermo EPP
Read MoreБыстрый просмотрSurfacing waterproofing material Technoelast Thermo EPP
2.96 $ Approximate price per square meterUsage: Construction of open-cut tunnels, Inversion roofs, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of bridges, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast Thermo EPP – APP modified roll waterproofing material with increased heat resistance (130), used for the construction of a waterproofing layer in foundations, roofs, bridges and other building structures with increased requirements for heat resistance of waterproofing material.
- You've just added this product to the cart:
Mastic Hot Bituminous Rubber MBR
Read MoreБыстрый просмотрMastic Hot Bituminous Rubber MBR
46.00 $ Retail price per kgUsage: Parking of cars, Strengthening of asphalt-concrete seam, Waterproofing of bridges, Waterproofing of expansion joints, Waterproofing of flat roofs, Waterproofing of foundations, Waterproofing of industrial seams, Waterproofing of road surfaces
Roofing mastic of hot application Eureka No. 41 is designed for effective repair and flat roofing, but can also be used for waterproofing steel structures, concrete blocks, columns, concrete building blocks and pipelines. The use of hot waterproof mastics is more effective and durable than the use of cold mastics because of the greater liquidity of the material
Indicator name Unit. measurements Normative value MBR-65 MBR-75 MBR-90 MBR-100 Softening temperature according to the KiS method, not less than оС 65 75 90 100 Depth of penetration of the needle at 25 оС, not less than 0,1 mm 40 30 20 15 -||- Растяжимость при 25 оС, не менее cm 4 4 3 2 -||- Водонасыщение за 24 ч, не более % 0,2 0,2 0,2 0,2 Application temperature, within 0С +5 to -30
+15 to -15
+35 to -5
От +40 to -5 –