The claimed characteristics of the materials sold by us may differ only for the better
Bentonite geomat ASL
7.30 $ Approximate middle wholesale price per square meter
- Additional information
- Questions & Answers
Bentonite geomat (bentomat) ASL is a four-layered fabric, in which the first layer (upper) is a non-woven needle-punched fabric, density of at least 250 g / m2 (by order, it is possible to increase the density up to 600 g / m2), the second layer – granules of bentonite, the third layer – woven polypropylene high-strength geotextile, the lowest layer – LDPE membrane thickness from 0.2 to 0. 6 mm.
Bentonite geomat with geomembrane LDPE is used in cases when environmental protection is subject to increased requirements, as well as in the case of working with highly toxic materials.
Used for the construction of a waterproofing layer with horizontal waterproofing (including highly loaded stylobates) and anti-filtration screens. The main feature of the bentomat is that, unlike other waterproofing used on similar projects, it does not require preliminary preparation of the substrate, withstands significant loads, self-repairs with minor mechanical damages, and its laying is possible at extremely low temperatures (up to -50 degrees).
|Index||АС 50||АС 100||АСL 50||АСL 100|
|Coefficient of filtration at 200 kPa
perpendicular to the plane, m / s, not more than
in the plane direction, m / s, not more than
|Degree of swelling, ml / 2g, not less than||24||24||24||24|
|Surface density of bentonite mat, kg / m2, ± 10||3.9||5.2||4.1||5.4|
|Tensile strength (along / across), kH / m, not less than||12/10||12/10||12/10||12/10|
|Adhesion strength, N / m, not less than||400||400||400||400|
|Resistance to hydrostatic pressure, atm, not less than||5||6||5||6|
|The thickness of the material at a load of 2 kPa, mm, ± 10%||6.0||6.4||6.2||6.6|
Construction of open-cut tunnels, Landfills, Protection against radon, Radioactive and toxic burial grounds, Reservoir, Software polygons, Tunnel construction in a closed way, Шламохранилища
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
Geogrid polyethylene uniaxial CO
Usage: Anti-landslide measures, Antilock dykes, Armorranean mounds, Forest and access roads, Ground retaining walls, Mooring walls, Noise Shafts, Ponds and reservoirs, Reinforcement of slopes, Reinforcing the roadbed, Shores of rivers and canals
- The uniaxial geogrid is used for the construction of soil retaining walls within the framework of a single construction system, it can also be used for anti-landslide measures, the construction of approaches to bridges and other soil fortifications.
Conventional designation of a geogrid Stretch load in the longitudinal direction, not less than, kN / m: Surface density, g / m2, + 3% -10% Tensile strength with allowance for creep for 120 years of operation at a temperature of +20 ºС, kN / m at rated load at a relative elongation 2% 5% CO-55 55 12 25 410 24,7 CO-80 80 20 40 600 35,5 CO-90 90 23 46 690 40,4 CO-110 110 29 58 860 49,5 CO-120 120 30 60 940 54,2 CO-140 140 35 70 1100 62,5 CO-160 160 40 80 1250 69,0 CO-162 162 42 84 1400 69,8 CO-170 170 45 90 1500 73,3 CO-180 180 47 94 1600 77,3
Geotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Geo-grating polypropylene biaxial
Usage: Base of the roadway, Forest and access roads, Materials for the arrangement of parking places, Parking lots with heavy equipment, Parking of cars, Protection against rockfalls, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Road construction, Strengthening of pavement, Strengthening of roadsides, Strengthening the foundations of railway embankments
- Biaxially oriented flat geogrid of polypropylene has high strength in both directions, it has wide, almost universal use (it can be laid as in the base of the roadway to strengthen the weakly bearing soil, so it can be laid directly into the asphalt to strengthen the asphalt-concrete coating and prevent the appearance of cracks and “creep” clothes of a road cloth).
Conventional designation of geogrids
Tensile load, kN / m, not less than
Relative elongation at normalized load,%, not more than
Surface density, g / m²: + 3% -10%
At rated load
With a relative elongation
across SD-20 20 20 7 7 15 15 11,5 10,5 240 SD-30 30 30 10 10 20,5 20,5 11,5 10,5 340 SD-40 40 40 13 13 26 26 11,5 10,5 530 СД-45 45 45 13 13 26 26 11,5 10,5 650 Conventional designation of geogrids Cell size, length / width, mm Skew cells, degrees Roll width, m, not more than Length of roll (+ -1%), m SD-20 40/40 or 65/65 ±3 4 50 SD-30 40/40 or65/65 ±3 4 50 SD-40 40/40 ±3 4 50 SD-45 65/65 ±3 4 50