The claimed characteristics of the materials sold by us may differ only for the better
The device of strain joints without loads
Profile for a deformation seam facade consignment DGK-FAS 2
Usage: Arrangement of facade deformation seams, The device of strain joints without loads
Deformation profile DGC-FAS 2 (Dilatation device AquaBarrier) – an overhead deformation sealant compensator, equipped with special facade aluminum slats. The compensator is made of thermoplastic elastomer (TEP). It is used for the device of hermetic sealing of the expansion joint on the facades of buildings and on unexploited surfaces. The width of the deformable joint is from 30 to 120 mm. From the deformation profile DGC FAS differs by a more reliable fixation scheme.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DGK-FAS/030 G2–028 1 1 2 30 34 – G5–028 4 12 8 – DGK-FAS/040 G2–038 2 2 4 40 44 – G5–038 6 22 12 – DGK-FAS/050 G2–048 2 2 4 50 54 – G5–048 8 26 16 – DGK-FAS/070 G5–068 12 38 24 70 74 – – DGK-FAS/090 G5–088 16 50 32 90 94 – – DGK-FAS/120 G5–118 22 62 44 120 124 – – Profile for a deformation seam facade plug-in DGA-FAS
Usage: Arrangement of facade deformation seams, The device of strain joints without loads
Deformation profile DGC-FAS (Dilatation device Aquabarrier) is an insertion deformation sealed compensator equipped with special facade aluminum slats. The compensator is made of thermoplastic elastomer (TEP). It is used for the device of hermetic sealing of the expansion joint on the facades of buildings and non-exploitable surfaces. The width of the deformable joint is from 30 to 120 mm.
Deformation profile Compensator Compensator view Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DGK-FAS/030 G2–028 1 1 2 30 30 – G5–028 4 12 8 – DGK-FAS/040 G2–038 2 2 4 40 40 – G5–038 6 22 12 – DGK-FAS/050 G2–048 2 2 4 50 50 – G5–048 8 26 16 – DGK-FAS/070 G5–068 12 38 24 70 70 – – DGK-FAS/090 G5–088 16 50 32 90 90 – – DGK-FAS/120 G5–118 22 62 44 120 120 – – Profile for the deformation seam versatile waybill double DSHS-0 (DSHS-0-UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
Deformational profile of DPS-0 / DFS-0-UGL (Dilatation device Aquabarrier) is intended for the device of expansion joints with a width of 30 to 200 mm on walls, office, administrative and other buildings, as well as for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. The installation of the seam – a bill of lading, mounted directly on the finish coat.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-0 / 060 C2–055 4 20 30 60 137 137 – DSHS-0-UGL / 060 99 99 – DSHS-0 / 100 C2–100 16 50 40 100 177 177 – DSHS-0-UGL / 100 139 139 – DSHS-0 / 110 C3–105 12 60 50 110 187 187 – DSHS-0-UGL / 110 149 149 – DSHS-0 / 130 C3–125 23 80 70 130 207 207 – DSHS-0-UGL / 130 169 169 – DSHS-0 / 150 C2–140 38 100 80 150 227 227 – DSHS-0-UGL / 150 189 189 – DSHS-0 / 160 C3–155 26 110 90 160 237 237 – DSHS-0-UGL / 160 199 199 – DSHS-0 / 200 C2–195 44 130 100 200 277 277 – DSHS-0-UGL / 200 239 239 – Profile for the deformation weld of the wall-mounted DGK-0 / DGK-0 UGL
Usage: The device of angular expansion joints, The device of expansion joints, The device of expansion joints in walls, The device of strain joints without loads
Deformation profile DGC-0 (Dilatation device AquaBarrier) – an overhead deformational sealer compensator, which consists of two aluminum straps with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the settable joint is from 20 to 125 mm. Available in two versions – angular and straight.
Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DGK-0 G2-018 1 1 2 20 72 – DGK–0–UGL / 025 G5-018 2 10 5 25 51 – DGK–0 / 030 G2-028 1 1 2 30 82 – DGK–0–UGL / 025 G5-028 4 12 8 35 61 – DGK–0 / 040 G2-038 2 2 4 40 92 – DGK–0–UGL / 025 G5-038 6 22 12 45 71 – DGK–0 / 050 G2-048 2 2 4 50 102 – DGK–0–UGL / 025 G5-048 8 26 16 55 81 – DGK–0 / 070 G5-068 12 38 24 70 122 – DGK–0–UGL / 025 75 101 – DGK–0 / 090 G5-088 16 50 32 90 142 – DGK–0–UGL / 025 95 121 – DGK–0 / 120 G5-188 22 62 44 120 172 – DGK–0–UGL / 025 125 151 – Profile for the expansion joint decorative patch PSA angular
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The PSA strain profile is used exclusively for decorative purposes, it is made of solid aluminum (without compensator) for joints in shopping centers, administrative and office buildings, and apartments. Mounting of the PSA deformation profile with the width of the seam 30, 50 mm can be carried out with the help of a bezanker method (due to a special latch fixing the bar inside the seam). The profiles PSA-100, 150 and 180 are assembled using anchors (an anchor in the kit).
Deformation profile Displacements, mm Dimensions, mm Compression Stretching Shift A B C PSA angular–040 9 9 – 30-33 40 40 PSA angular–050 19 19 – 30-35 50 50 PSA angular–075 20/30 20/31 – 45-50 75 75 PSA angular–110 50 50 – 60-85 110 110 PSA angular–130 70 70 – 70-90 130 130 Profile for the expansion joint of decorative patch PSA
Usage: The device of expansion joints, The device of strain joints without loads
The PSA strain profile is used exclusively for decorative purposes, it is made of solid aluminum (without compensator) for joints in shopping centers, administrative and office buildings, and apartments. Mounting of the PSA deformation profile with the width of the seam 30, 50 mm can be carried out with the help of a bezanker method (due to a special latch fixing the bar inside the seam). The profiles PSA-100, 150 and 180 are assembled using anchors (an anchor in the kit).
Deformation profile Displacements, mm Dimensions, mm Compression Stretching Shift A B C PSA-050 10 10 30 50 50 PSA-075 15 15 50 75 75 PSA-100 40/33 40/33 40-50 100 100 PSA-150 50 50 50-100 150 150 PSA-180 60 60 60-100 180 180 Profile for the expansion joint of the wall DGC-2 / DGK-UGL
Usage: The device of angular expansion joints, The device of expansion joints in walls, The device of strain joints without loads
Deformation profile DGC-2 (Dilatation device Aquabarrier) – a mortgage (under the tile or any other finishing coating with a thickness of 2 mm), a deformable sealing expansion joint consisting of two aluminum straps with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the settable joint is from 20 to 125 mm. Available in two versions – angular and straight.
Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B=C DGK-2 / 020 G2-018 1 1 2 20 72 – DGK–2–UGL / 025 G5-018 2 10 5 25 51 – DGK–2 / 030 G2-028 1 1 2 30 82 – DGK–2–UGL / 035 G5-028 4 12 8 35 61 – DGK–2 / 040 G2-038 2 2 4 40 92 – DGK–2–UGL / 045 G5-038 6 22 12 45 71 – DGK–2 / 050 G2-048 2 2 4 50 102 – DGK–2–UGL / 055 G5-048 8 26 16 55 81 – DGK–2 / 070 G5-068 12 38 24 70 122 – DGK–2–UGL / 075 75 101 – DGK–2 / 090 G5-088 16 50 32 90 142 – DGK–2–UGL / 095 95 121 – DGK–2 / 120 G5-188 22 62 44 120 172 – DGK–2–UGL / 125 125 151 – Profile for the expansion joint of the wall DGK-15
Usage: The device of expansion joints, The device of expansion joints in walls, The device of strain joints without loads
Deformation profile DGK-15 (Dilatation device Aquabarrier) – a mortgage (under the tile or any other finishing coating with a thickness of 15 mm), a deformable sealing expansion joint consisting of two aluminum bars with a thermoplastic elastomer (TEP) compensator. It is used to seal the expansion joint on walls and surfaces that are not used. The width of the deformable joint is from 18 to 135 mm. Available in two versions – angular and straight.
Deformation profile Compensator (type) Expansion profile Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift А B/C DGK-15 / 018 Г2-018 1 1 2 18 24/92 – DGK–15–UGL / 035 Г5-018 2 10 5 35 22/72 – DGK–15 / 028 Г2-028 1 1 2 28 34/102 – DGK–15–UGL / 045 Г5-028 4 12 8 45 32/82 – DGK–15 / 038 Г2-038 2 2 4 38 44/112 – DGK–15–UGL / 055 Г5-038 6 22 12 55 42/92 – DGK–15 / 048 Г2-048 2 2 4 48 54/122 – DGK–15–UGL / 065 Г5-048 8 26 16 65 52/102 – DGK–15 / 068 Г5-068 12 38 24 68 74/142 – DGK–15–UGL / 85 85 72/122 – DGK–15 / 088 Г5-088 16 50 32 88 94/162 – DGK–15–UGL / 105 105 92/142 – DGK–2 / 118 Г5-188 22 62 44 118 124/192 – DGK–15–UGL / 135 135 122/172 – Profile for the expansion joint universal single bill DSHS-0 (DSHS-UHL-0)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The deformation profile of the DShS-0 / DShS-0-UGL (Dilatation device Aquabarrier) is designed for the device of expansion joints with a width of 30 to 100 mm on walls, office, administrative and other buildings, and also for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. The installation of the seam – a bill of lading, mounted directly on the finish coat.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-0 / 030 C1–027 2 10 10 30 107 107 – DSHS-0-UGL / 030 69 69 – DSHS-0 / 050 C1–048 8 40 40 50 128 128 – DSHS-0-UGL / 050 90 90 – DSHS-0 / 075 C1–069 19 50 50 75 149 149 – DSHS-0-UGL / 075 111 111 – DSHS-0 / 100 C1–097 2 70 70 100 177 177 – DSHS-0-UGL / 100 139 139 – Profile for universal expansion joint mortgage double DSHS-16 (DSHS-16 UGL)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The deformation profile of the DShS-16 (DShS-16-UGL) (Dilatation device Aquabarrier) is designed for the device of expansion joints with a width of 50 to 210 mm on walls, office, administrative and other buildings, as well as for joints on unexploited floors. The deformation profiles of the DPS series are not intended for operation. Installation of the seam – a mortgage, is installed under the finish coat with a total thickness of not more than 16 mm.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-16 / 050 C2–055 4 20 30 50 70
65 133 – DSHS-16 UGL / 070 65 112 – DSHS-16 / 090 C2–100 16 50 40 90 110
105 173 – DSHS-16 UGL / 110105 105 161 – DSHS-16 / 100 C3–105 12 60 50 100 120
116 183 – DSHS-16 UGL / 120 115 161 – DSHS-16 / 120 C3–125 23 80 70 120 140
136 203 – DSHS-16 UGL / 140 135 171 – DSHS-16 / 130 C2–140 38 100 80 130 150
145 213 – DSHS-16 UGL / 150 145 191 – DSHS-16 / 150 C3–155 26 110 90 150 170
165 233 – DSHS-16 UGL / 170 165 211 – DSHS-16 / 190 C2–195 44 130 100 190 210
205 273 – DSHS-16 UGL / 170 205 252 – Profile for universal movement joint mortgage single DSHS-16 (DSHS-UGL-16)
Usage: The device of angular expansion joints, The device of expansion joints, The device of strain joints without loads
The deformation profile of DShS-16 (DShS-16-UGL) (Dilatation device Akvabarer) is designed for the device of expansion joints with width from 20 to 110 mm on walls, ceilings of office, administrative and other buildings, as well as for joints in unexploited floors. The deformation profiles of the DPS series are not intended for operation. Installation of the seam – the mortgage for the finish coat (under the plaster) is not less than 16 mm.
Deformation profile Compensator Types of expansion joints Displacements, mm Dimensions, mm Load, MPa Compression Stretching Shift A B C DSHS-16 / 020 C1–027 2 10 30 20 35 102 – DSHS-16-UGL / 040 40 35 81 – DSHS-16 / 040 C1–048 8 40 40 40 55 122 – DSHS-16-UGL / 060 60 55 101 – DSHS-16 / 065 C1–069 19 50 50 65 80 147 – DSHS-16-UGL / 085 85 80 125 – DSHS-16 / 090 C1–097 22 70 70 90 105 172 – DSHS-16-UGL / 110 110 105 151 –