The claimed characteristics of the materials sold by us may differ only for the better
Mastic gluing №22 (Vishera)
Price on request
- Additional information
- Questions & Answers
Mastic gluing №22 is a multicomponent mass, which includes petroleum bitumen, SBS-modificate, organic solvent and technical additives. The main purpose of gluing mastic No.22 TechnoNIKOL is gluing of roll, bitumen-polymer waterproofing materials without adhesive film to various surfaces.
It is used with roll-on waterproofing materials marked EMF / EMM (the roll materials are glued with a side covered with fine-grained sand, which provides sufficient adhesion (0.3 MPa) between the roll materials and the base) in cases where a fireproof method of mounting a waterproofing coating is required.
|Strength of adhesion to concrete, MPa||
|Прочность сцепления с металлом, МПа||
|Strength of adhesion between roll materials, MPa||
|Прочность сцепления рулонный материал-бетон, МПа||
|Shear strength of adhesive joint, kN / m||
|Conditional strength, MPa||
|Relative elongation at break,%||
|Water absorption for 24 hours, by weight||
|Массовая доля нелетучих веществ, %||
|Heat resistance, С||
|Temperature of flexibility on the bar, C||
Questions and answers of the customers
There are no questions yet, be the first to ask something for this product.
You may also like…
Geotextile non-woven needle-punched 300
Usage: Armorranean mounds, Base of the roadway, Drainage layer, Horizontal reservoir drainage, Hydrotechnical works, Inversion roofs, Materials for the arrangement of parking places, Ponds and reservoirs, Reinforcement of asphalt concrete, Reinforcement of slopes, Reinforcing the roadbed, Reservoir, Road construction, Scaffolding, Seed shelter, Shelter of roses, The device of drainage systems
- From secondary raw materials: color from light gray to dark gray (depending on the lot)
- From the primary raw material: white color + 25% of the cost
Surfacing waterproofing material Tehnoelast Terra EMP -25 / + 100 5.0
Usage: Construction of open-cut tunnels, Inversion roofs, Landfills, Parking of cars, Stylobates loaded, Under the foundation, Under the foundation of 3 or more floors, Underground parking lots, Waterproofing of flat roofs, Waterproofing of foundations
Technoelast HPP – SBS modified waterproofing material based on glass fiber, the application of which is very wide – a vapor barrier (lower) layer, as well as waterproofing foundations with mandatory protection against backfilling, or when using the material as a bottom layer of a two-layer waterproofing foundation.
Woven geotextile 80-80 (PET)
Usage: Base of the roadway, Drainage layer, Drainage of retaining walls, Ground retaining walls, Horizontal reservoir drainage, Landfills, Landscaping, Materials for the arrangement of parking places, Reinforcement of slopes, Strengthening of pavement, Strengthening of slopes, The device of drainage systems
- Woven geotextile 80 – woven fabric, medium strength, universal application, guaranteeing the tensile strength at a longitudinal 6% elongation of at least 50 kN / m. It is also possible to manufacture woven materials with a strength of up to 2000-100.
- Possible manufacturing of other materials: polypropylene, polyamide.
Name Tensile strength in longitudinal / transverse direction, kN / m Surface density, g / square. m Woven Geotextile 50/50 50/50 175 Woven Geotextile 80/80 80/80 250 Woven Geotextile 100/50 100/50 230 Woven Geotextile 100/100 100/100 350 Woven Geotextile 150/50 150/50 320 Woven Geotextile 150/150 150/150 500 Woven Geotextile 200/50 200/50 430 Woven Geotextile 200/100 200/100 500 Woven Geotextile 200/200 200/200 660 Woven Geotextile 300/50 300/50 550 Woven Geotextile 300/100 300/100 660 Woven Geotextile 400/50 400/50 730 Woven Geotextile 400/100 400/100 810 Woven Geotextile 600/50 600/50 1100 Woven Geotextile 600/100 600/100 1180 Woven Geotextile 800/50 800/50 1350 Woven Geotextile 800/100 800/100 1420
Profiled geomembrane 8 mm Planter Standart 250 kN / m²
- Planter Standard – profiled membrane of the popular domestic manufacturer TekhnoNIKOL, 100% consists of secondary raw materials, due to which it has a relatively low price.
- Strength of the element with a geometrical deformation of not more than 10%: 250 kN / m²